Fujitsu M3093E Manual

FUfTSU
M3093E
IMAGE SCANNER
OPERATOR’S GUIDE
50FH5014E-04

REVISION RECORD
Edition Date published
01 Jun., 1989
02 Sep., 1989
03 May, 1990
04 Dec., 1990
Revised contents
PagesZ-1.3-I. 4-1,4-2,4-4to4-9,4-12,4-13,4-16to4-19,4-21 to4-23,7-I revised.
Pages2-lOto2-I2 added.
CHAPTER 5 revised.
Specification NO.: 50FH5014E
This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus set out in the Radio
interference Regulations of the Canadian Department of Communications.
Le present appareil numbrique n’bment pas de bruits radloelectriques depassant les limites applicables aux appareils
numeriques de la classe A prescridtes dans le Reglesment sur le brouillage radio&ledrique edict4 par le ministere des
Communicationsdu Canada.
in accordance with such laws. FUJ,TSU L,M,TiD 1
The contents of this manual issubject to change
without prior notice.
authonzatlon from the appropriate governmental authontles
All Rights Reserved,
Copyright0 1989,199O FUJITSU LIMITED
This document contains technology relating to strategic 1
products controlled by export control laws of the producing
and/or exporting countries. This document or a portion
thereof should not be exported (or reexported) without
50FIi5014&04 i

CONTENTS
page
CHAPTER1 GENERAL .................................................. l-l
CHAPTER 2 INSTALLATION ............................................ 2 - 1
2.1 Precautions of Installation ............................................ 2 - 1
2.2 Unpackaging ........................................................ 2-2
2.3 Checking Received Products .......................................... 2 - 4
2.4 Shipping Retainer Removal ........................................... 2 - 5
2.5 PartsNames ........................................................ 2-7
2.6 CableConnection .................................................... 2-8
2.7 Repackaging ........................................................ 2-10
CHAPTER 3 PRECAUTIONS ............................................ 3 - 1
CHAPTER 4 OPERATION ............................................... 4 - 1
4.1 PowerON/OFF ...................................................... 4-l
4.2 Appearance and Function of Operator Panel ............................ 4 - 2
4.2.1 Switchoperation .................................................... 4-2
4.2.2 Flow-chart of operator panel .......................................... 4 - 3
4.2.3 Details of indication and operation of the panel ......................... 4 - 4
4.3 ADF Paper Chute Setting ............................................ 4 - 16
4.3.1 ADF paper chute setting ............................................. 4 - 16
4.3.2 Output stacker installation ........................................... 4 - 16
4.3.3 Output extensions installation ........................................ 4 - 17
4.3.4 Input extensions installation ......................................... 4 - 18
4.4 DocumentSettingMethod ............................................ 4-18
4.4.1 Flat-bed ............................................................ 4-18
4.4.2 Automaticdocumentfeeding .......................................... 4-20
4.5 PaperJamAlarmRecovery ........................................... 4-24
CHAPTER5 REPLACEMENT ........................................... 5-l
5.1 LampUnitReplacement ............................................. 5-l
5.2 Pad Assembly Replacement ........................................... 5 - 3
50FH5014E-04 ...
111

CHAPTER 6 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6- 1
CHAPTER 7 CLEANING ................................................. 7 - 1
7.1 Cleaning Document Cover and Document Board Glass .................. 7 - 1
7.2 Cleaning the ADF Section ............................................ 7 - 1
50FI15014E-01

FIGURES
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11
3.1
4.1
4.2
4.3
4.4
4.5
4.6
5.1
5.2
5.3
7.1
page
Unpackaging ........................................................ 2-3
Receivedproducts ................................................... 2-4
Documentcoverremoval ............................................. 2-5
Lampcoverremoval ................................................. 2-6
Shippingretainerremoval ............................................ 2-6
M3093Epartsnames ................................................. 2-7
Signal cable connection .............................................. 2- 8
Power cable connection ............................................... 2- 9
Carrier fixing pin installation ......................................... 2- 11
Repackaging(l) ..................................................... 2-11
Repackaging(2) ..................................................... 2-12
Cleaning the document board glass .................................... 3- 1
Power switch and indicator ........................................... 4 - 1
Operatorpanel ...................................................... 4-2
ADF paper chute setting ............................................. 4 -16
Document setting on flat-bed ......................................... 4 -18
Loadingthedocument ................................................ 4-22
Jammedpaperremoval .............................................. 4-24
Lamp unit removal .................................................. 5 - 2
Replacementpflampunit ............................................ 5-2
Padassemblyremoval ............................................... 5-3
Cleaning the ADF section ............................................ 7 - 2
50FH5014E-04

TABLES
page
2.1 Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
50FH5014E-01 vii

CHAPTER 1 GENERAL
The M3093E Image Scanner reads image information on a document and inputs the
information into the host computer. The image scanner consists of the image reading
mechanism, document feed mechanism, microprocessor control circuit, operator panel and
power supply.
The features of this device are:
l A document as large as A4 size can be read.
l High-speed reading (less than 3.5 seconds for a ACsize document with 400 dpi 1
l High-resolution reading (400 dpi)
l Compact desktop size
l Automatic document feeder (ADF)
50FH5014E-01 l-l

CHAPTER 2 INSTALLATION
2.1 Precautions of Installation
2.2 Unpackaging
2.3 Checking Received Products
2.4 Shipping Retainer Removal
2.6 Parts Names
2.6 Cable Connection
2.7 Repackaging
This chapter explains the unpackaging procedure, installation procedure and confirmation
of operation.
2.1 Precautions of Installation
Pay attention to following matter before &packaging and installation.
Do not install in a place where vibration may occur.
Keep the scanner out of the sun. Do not install near a hear source.
To ensure proper air circulation, do not place material around scanner.
Do not install in a humid or dusty place.
Do not use the wall socket with connecting devices which may make noise, for
example motor.
Use the suitable AC power source.
50FH5014E-02 2-l

2.2 Unpackaging
Perform unpackaging according tofollowing procedure.
0 Remove twojoints.
8 Pull up the carton to remove.
0 Remove the upper retainers.
0 Take out the accessories and test certificate.
63 Take out the scanner.
@ Take out the scanner from vinyl bag and remove the protection tape.
6 Check the accessories by refering to Figure 2.2 and Table 2.1
2-2 50FH5014E-01

I
Accessories
Jpper retainer (L)
Scanner
Lower retainer CL)
Upper retainer CR)
Test certificate
\
Lower retainer CR)
/
Accessory retainer
Lower carton
Figure 2.1 Unpackaging
50FH5014E-01 2-3

2.3 Checking Received Products
Check that the following items have been received.
Fuses ( types) (For USA) (For Europe) Extentions
Power cable
Test certificate CCD Adjustment Bracket
Figure 2.2 Received products
2-4 50FN5014E-01

Table 2.1 Check list
No. name Quantity Remarks
1 Power cable 1
2-l Fuses 2 3.2A 4.OA
(For USA)
2-2 Fuses 2 3.2A 2.OA
(For Europe)
3 Stacker 1
4 CCD Adjustment Bracket 1
5 Extentions 2
2.4 Shipping Retainer Removal
0 Remove the document cover
Open the document cover approximate 45”and pull it as shown in Figure 2.3.
Document cover
Figure 2.3 l)ocument cover removal
50FH5014E-01 2-5

8 Pull up the lamp cover.
Figure 2.4 Lamp cover removal
C3 Pull out the shipping retainer.
Shipping retainer
Figure 2.5 Shipping retainer remo,val
8 Put in the lamp cover.
2-6
6 Put on the document cover.
50FH5014E-01

2.5 Parts Names
Figure 2.6 describes parts names.
Document cover
ADF
Stacker
ADF Chute
-Document pad
Document board (Glass)
I I Power switch
[ ,_ _--
f
Operator panel
Power Connector Signal connectors
Figure 2.6 M3093E parts names
50FH5014E-01 2-7

2.6 Cable Connection
Connect the signal cable and power cable as follows.
0 Confirm that the power switches of the image scanner and host computer have
been set to OFF.
8 Connect the image scanner to the host computer with signal cables V and R.
Signal cable V
!Ggnal cable R
Screw To host computer
To host computer
Figure 2.7 Signal cable connection
Insert the two cables as shown in Figure 3.3. Fasten the two catches to signal cable V
and fix signal cable R with the screws.
The other end of each cable should be attached to the host computer in the same way.
2-8 50FH5014E-0.1

0 Insert the power cable into its connector on the rear of the image scanner.
Also insert the power cable into a power outlet (with FG).
Figure 2.8 Power cable connection
50FH5014E-03
outlet.
2-9

2.7 Repackaging
When the scanner is moved for long distance, repackaging should be done with
following method.
Turn on the power with pressing ‘Select’ and ‘Mode’ iswitches.
The carrier will go to the center of flat-bed.
Turn off the power when the LCD panel indicates ‘Power Off.
Remove the document cover and the lamp cover.
Disconnect the power cable.
Insert the carrier fixing pin to the hole of the carrier (see Figure 2.9).
Put the lamp cover and the document cover.
Push down the chute and remove the stacker and ex,tensions.
Set poly-urethane foam on the upper cover and close the document cover (see
Figure 2.10).
Tight the covers with adhesive tape (see Figure 2.10).
Put the scanner into the vinyl bag.
Put the scanner into the lower carton.
Put the accessories into the lower carton.
Put the upper retainers on the scanner, and close the box with upper carton.
Put the joints to the box.
2-10 50FH5014E-03

,-
/
/
/
/
/
EC
,,
,Z,’ ,,:3
I.’ Carrier fixing pin
Figure 2.9 Carrier fixing pin installation
Tape cusion to the
document cover. \
Push down and
Tape the lamp cover.
Figure 2.10 Repackageing (1)
To be taped.
50FH5014E-03 2-11

Upper retainers
Test certificate
/i i
I
rower retainer (ttj
Accessory retainer
Figure 2.11 Repackaging (2)
2-12 50FH5014E-03

CHAPTER 3 PRECAUTIONS
Use dry cloth or neutral cleanser to remove dirt from the cover, glass, document
cover, and document holding pad. Do not use organic solvents such as thinner.
Do not look directly at the light source during reading. Keep the document cover in
place.
If the document is moved during reading, the image quality will be poor and the
read data is not guaranteed.
Position the document on the glass surface.
Warming up time is necessary after power-up. During warm up, the Size, Density,
Resolution, and Line lamps blink and reading cannot be done. The warming up
time depends on the ambient temperature. It is approximately 3 minutes at 5°C and
30 seconds at 25°C.
Figure 3.1 Cleaning the document board glass
No
cl
Thinner
Yes
Neutral
cleanser
(such as
window
cleaner)
50FH5014E-02 3-1