Fujitsu FI-6750S Manual

Index
Appendix
Explains how to scan documents using a
scanning application “ScandAll PRO.”
Shows scanner’s parts names and their
functions plus the basic operation.
Explains how to scan various types of doc-
uments.
Introduction
fi-6670
(
A
)
/fi-6770
(
A
)
/fi-6750S
Explains how to load documents on the
scanner.
Describes the configurable parameters in
the scanner drivers.
Explains how to clean the scanner.
Explains how to replace the scanner con-
sumables.
Explains how to troubleshoot scanner
problems.
Explains how to configure scanner settings
using the Software Operation Panel.
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
P3PC-2252-02ENZ0
Scanner
Overview
How to Use This Manual
Operator’s Guide
Thank you for purchasing a fi-6670(A) / fi-6770(A) / fi-6750S Color Image Scanner series.
This manual provides the basics of how to operate and handle the scanner.
Refer to the Getting Started for information on how to install and connect the scanner, and
how to install related scanning software.

How to Use This Manual
2
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
How to Use This Manual
The following shows the tips for using this manual.
Cover page
Contents page
Index page
Common Notes:
•Clicking a blue-colored character string (where your mouse pointer
changes to the shape of a hand pointing upward (such as ) when
you hover over the string) moves to the linked section.
•In this manual, you can use the navigation option of Adobe®Acrobat®
or Adobe®Reader.
For details, refer to the Adobe®Acrobat®or Adobe®Reader Help.
•Keyboard assistance is also available. Use the PageUp key to go to
the previous page, and the PageDown key to the next page.
Index
Appendix
Explains howto scan document using a
scanning application “ScandAll PRO.”
Shows scanner’s parts names and their
functions plus the basic operation.
Explains howto scan various types of doc-
uments.
Introduction
fi-6670(A)/fi-6770(A)/fi-6750S
Explains howto load documents on the
scanner.
Describes the parameters configurable in
the scanner drivers.
Explains howto clean the scanner.
Explains howto replace the consumables
of the scanner.
Explains howto troubleshoot.
Explains howto configure scanner settings
using the Software Operation Panel.
Glossary
Contents
TOP
Loading
Documents
Howto Use
ScandAll PRO
Scan Pa-
rameters
Various
Scans
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
P3PC-2252-01Z0
Scanner
Overview
Howto Use
Operator’s Guide
Thank youfor purchasing the fi-6670(A) / fi-6770(A) / fi-6750S Color Image Scanner series.
This manual provides the basics of howto operate and handle the scanner.
Refer to the Getting Started for information on howto install and connect the scanner, and
howto intall related scanning software,
Clicking a desired
chapter title
moves to its top
page.
TOP: Moves to the top page of this manual.
Contents: Moves to the top page of the Table of Contents.
Index: Moves to the top page of the Index section.
Moves to this
page (here).
Contents
14
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
Howto Use
ScandAll PRO
Scan Pa-
rameters
Various
Scans
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Contents
Howto Use This Manual ........................................ 2
Introduction ............................................................. 3
Regulatory Information ........................................... 4
Conventions ............................................................ 6
Precautions ............................................................. 8
Safety Information ................................................ 10
Chapter 1Scanner Overview .............................. 18
1.1 Overview and Features ..................................... 19
Overview.............................................................. 19
Features ............................................................... 19
1.2 Scanner Parts and Their Functions ................. 20
fi-6670(A) (ADF Type) .......................................... 20
fi-6770(A)/fi-6750S (FB Type) ..............................22
Model-Common Parts .......................................... 25
1.3 Functions of the Operator Panel ...................... 26
Operator Panel ..................................................... 26
Indications on the Function Number Display ........ 28
1.4 Turningthe Scanner On and Off ...................... 29
Turning the Scanner On ....................................... 29
Turning the Scanner Off ....................................... 29
1.5 Power Save Mode .............................................. 30
Returning from e Power SaveMode .................... 30
1.6 ScanningDocuments ........................................ 31
Chapter 2LoadingDocuments .......................... 33
2.1 LoadingDocuments on the ADF ...................... 34
2.2 ADF-Loaded Documents .................................. 37
Sizes..................................................................... 37
Paper Quality........................................................ 37
Maximum Document Loading Capacity................ 39
Area Not to be Perforated .................................... 39
Loading Documents with Tabs or
Non-Rectangular Documents ............................... 40
Multifeed Detection Conditions............................. 40
Limiting the Background Color Area..................... 41
JobSeparation Sheet ........................................... 42
2.3 Changingthe ADF Position (FB Type Only) ... 43
2.4 LoadingDocuments on the Flatbed
(FB Type Only) ................................................... 44
Chapter 3How to Use ScandAll PRO ................ 45
3.1 Overview of ScandAll PRO ............................... 46
3.2 LaunchingScandAll PRO ................................. 47
3.3 Selectinga Scanner Driver ............................... 48
3.4 Selectinga Scanner Model ............................... 49
3.5 Scan Parameters ............................................... 50
3.6 Selectinga ScanningMethod
(with [Scan Settings]) ........................................ 51
Scan ..................................................................... 51
Batch Scan ........................................................... 51
Clicking the title moves to the page that describes it.
Index
209
Index
Appndix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Index
A
ADF-Loaded Documents ................................................ 42
Advanced Scanning........................................................ 79
B
Basic Flow of Scanning Documents ............................... 33
Basic Specification ........................................................ 189
Before Contacting Your Dealer or Scanner Service Provider
151
C
Changing the ADF Position ............................................ 48
Checking Labels on the Scanner................................... 153
Cleaning Materials and Locations Requiring Cleaning.. 114
Cleaning the ADF .......................................................... 116
Cleaning the Flatbed (Flatbed Type Only)..................... 121
Configurable Items ........................................................ 156
Consumables................................................................. 122
Consumables and the Replacement Cycles.................. 123
Conventions...................................................................... 7
Customizing the Hardware Settings .............................. 105
D
Daily Care...................................................................... 113
E
Errors Indicated on the Operator Panel......................... 131
F
Features .......................................................................... 21
FUJITSU ISIS Scanner Driver......................................... 67
FUJITSU TWAIN 32 Scanner Driver ............................... 64
Functions of the Operator Panels.................................... 28
H
How to Use ScandAll PRO.............................................. 51
How to Use This Manual .................................................. 2
I
Installation Specification................................................ 191
Introduction....................................................................... 3
L
Launching ScandAll PRO................................................ 53
Loading Documents ........................................................ 38
Loading Documents on the ADF ..................................... 39
Loading Documents on the Flatbed (Flatbed Type Only) 50
O
Options .......................................................................... 194
Outer Dimensions.......................................................... 192
Overview of ScandAll PRO ............................................. 52
P
Paper Jams ................................................................... 129
Power ON/OFF Control ................................................. 187
Power Save Mode ........................................................... 32
Clicking the page for the desired item in the Index
moves to the page that describes it.

Introduction
3
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Introduction
Thank you for purchasing our fi-6670(A)/fi-6770(A)/fi-6750S series Color Image Scanner.
Scanner Models
This manual covers the following five scanner models, each featur-
ing as:
Manuals
The following manuals are included in the for the scanner. Read
them as needed.
Model Description
fi-6670
fi-6670A
Equipped with an automatic document feeder (ADF) for
automatic document feeding and duplex scanning.
The fi-6670A comes with a color graphics adapter (CGA)
board as a standard feature. It enables advanced image
processing at a high speed when used with Kofax VRS.
fi-6770
fi-6770A
Equipped with an automatic document feeder (ADF) for
automatic document feeding and duplex scanning, and a
flatbed for scanning documents such as thin paper or thick
books.
The fi-6770A comes with a color graphics adapter (CGA)
board as a standard feature. It enables advanced image
processing at a high speed when used with Kofax VRS.
fi-6750S Equipped with an automatic document feeder (ADF) for
automatic document feeding and simplex scanning, and a
flatbed for scanning documents such as thin paper or thick
books.
The ADF features simplex scanning only.
Manual Description
Package Contents List
(paper)
Lists all the items contained in the scanner
package. Make sure all are included in the
package.
Getting Started
(paper, PDF)
Outlines the procedures from installing up to
starting the operation of the scanner. Read
this manual first.
Operator’s Guide
(This Manual))
(PDF)
Provides detailed information on how to
operate, and maintain the scanner daily, how
to replace the consumables, and how to
troubleshoot problems. Included in the
SETUP DVD-ROM.The PDF data is included
in the SETUP DVD-ROM.
FUJITSU TWAIN32
User’s Guide (PDF)
Explains how to install and operate the
FUJITSU TWAIN32 scanner driver. Included
in the SETUP DVD-ROM.
Image Processing
Software Option
User’s Guide (PDF)
Explains how to install and operate the Image
Processing Software Option. Included in the
SETUP DVD-ROM.
VRS Note (PDF) Explains how to connect and install Kofax
VRS. Included in the SETUP DVD-ROM.

Introduction
4
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Trademarks
Microsoft and Windows are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
ISIS and QuickScan are trademarks or registered trademarks
of EMC Corporation in the United States.
Adobe, the Adobe logo, and Acrobat are either registered
trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
Kofax and VRS are trademarks or registered trademarks of
Kofax Image Products, Inc.
Other product names are the trademarks or registered trade-
marks of the respective companies.
Manufacturer
PFU LIMITED
International Sales Dept., Imaging Business Division,
Products Group
Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku,
Kawasaki-shi Kanagawa 212-8563, Japan
Phone: [phone]
All Rights Reserved, Copyright © PFU LIMITED 2008
Error Recovery Guide
(HTML help)
Details the status of the scanner and explains
how to resolve problems encountered.
Contains movies that explain how to replace
the consumables. Included in the SETUP
DVD-ROM.
Help - Embedded in
scanner drivers
Explains how to use the scanner drivers, and
how to configure the settings for them.
Help - Embedded in
related applications
Explains how to use and configure the
settings for the application software. Use help
files as necessary. Can be referenced from
the applications.
Manual Description

Regulatory Information
5
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Regulatory Information
FCC Declaration
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from
that to which the receiver is located.
•Consult your dealer or an experienced radio/TV technician.
FCC warning: Changes or modifications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Canadian DOC Regulations
This digital apparatus does not exceed the Class B limit for
radio noise emissions from digital apparatus set out in the
Radio interference Regulations of the Canadian Department
of Communications.
This Class B digital apparatus complies with Canadian ICES-
003.
Le présent appareil numérique n'émet pas de parasites
radioélectriques dépassant les limites applicables aux appar-
eils numériques de la classe B et prescrites dans le Règle-
ment sur le brouillage radioélectrique dictées par le Ministère
des Communications du Canada.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Bescheimigung des Herstellers/ Importeurs
Für den fi-6670(A)/fi-6770(A)/fi-6750S wird folgendes bescheinigt:
• In Übereinsstimmung mit den Bestimmungen der EN45014(CE)
funkentstört
• Maschinenlärminformationsverordnung 3. GPSGV: Der höchste
Schalldruckpegel beträgt 70 dB (A) oder weniger, gemäß ENISO
7779.
Dieses Gerät wurde nicht für die Benutzung in unmittelbarer Umgebung
starker Lichtquellen (z. B. Projektoren) konzipiert.
！
！
！The use of a shielded interface cable is required to comply with
the Class B limits of Part 15 of FCC rules. The length of the
Power cable must be 3 meters (10 feet) or less.

Regulatory Information
6
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
International ENERGY STAR®Program
As an ENERGY STAR®Partner, PFU LIMITED has determined that this
product meets the ENERGY STAR®guidelines for energy efficiency.
The International ENERGY STAR® Office Equipment
Program is an international program that promotes
energy saving through the penetration of energy effi-
cient computers and other office equipment. The pro-
gram backs the development and dissemination of
products with functions that effectively reduce energy
consumption. It is an open system in which business
proprietors can participate voluntarily. The targeted products are office
equipment such as computers, monitors, printers, facsimiles, copiers,
scanners, and multifunction devices. Their standards and logos are uni-
form among participating nations.
Use in High-Safety Applications
This product has been designed and manufactured on the assumption that
it will be used in office, personal, domestic, regular industrial, and general-
purpose applications.
It has not been designed and manufactured for use in applications (simply
called "high-safety applications" from here on) that directly involve danger
to life and health when a high degree of safety is required, for example, in
the control of nuclear reactions at nuclear power facilities, automatic flight
control of aircraft, air traffic control, operation control in mass-transport
systems, medical equipment for sustaining life, and missile firing control in
weapons systems, and when provisionally the safety in question is not
ensured.
The user should use this product with adopting measures for ensuring
safety in such high-safety applications. PFU LIMITED assumes no liability
whatsoever for damages arising from use of this product by the user in
high-safety applications, and for any claims or compensation for damages
by the user or a third party.

Conventions
7
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Conventions
Symbols Used In This Manual
For notational convention, the following symbols are used in
this manual:
Naming Conventions in This Manual
Scanners:
The scanners are indicated as follows:
The explanation in this manual bases on the following models:
ADF type: fi-6670
Flatbed type: fi-6770
Operating Systems and Software Products:
The OSs and products in this manual are indicated as follows:
！
！
！This symbol alerts operators to particularly important informa-
tion. Be sure to read this information.
This symbol alerts operators to helpful advice regarding opera-
tion.
Model Indication
fi-6670/fi-6670A ADF type Scanner
fi-6770/fi-6770A/fi-6750S Flatbed type
Product Indication
Microsoft®Windows®2000 Professional
operating system
Windows
2000
Windows
(*1)
Microsoft®Windows®XP Professional
operating system (32/64-bit)
Microsoft®Windows®XP Home Edition
operating system
Windows
XP
Microsoft®Windows Server™ 2003
Standard Edition operating system (32/64-
bit)
Windows
Server
2003
Microsoft®Windows Vista®Home Basic
operating system (32/64-bit)
Microsoft®Windows Vista®Home Premium
operating system (32/64-bit)
Microsoft®Windows Vista®Business
operating system (32/64-bit)
Microsoft®Windows Vista®Enterprise
operating system (32/64-bit)
Microsoft®Windows Vista®Ultimate
operating system (32/64-bit)
Windows
Vista
Microsoft®Office SharePoint™ Portal
Server 2003
Microsoft SharePoint
Server
Microsoft®Office SharePoint™ Server 2007
Adobe®Acrobat®Adobe Acrobat (*2)

Conventions
8
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
*1: Where there is no distinction between the different versions of the
above operating system, the general term "Windows" is used.
*2: All the descriptions in this manual assume the usage of Adobe
Acrobat bundled with this product. However, Adobe Acrobat may be
upgraded without notice. If the descriptions differ from the screens
actually displayed, refer to the Adobe Acrobat Help.
Arrow Symbols in This Manual
Right-arrow symbols (D) are used to separate icons or menu
options you should select in succession.
Example: Click [Tool] D[Scan Setting].
Screen Examples in This Manual
The screen examples in this manual are subject to change
without notice in the interest of product improvement.
If the actual displayed screen differs from the screen examples
in this manual, operate by following the actual displayed
screen while referring to the user's manual of the scanner
application you are using.
The screen examples used in this manual are of FUJITSU
TWAIN32 scanner driver, FUJITSU ISIS scanner driver,
ScandAll PRO (which is an image capturing software), and
Adobe Acrobat.

Precautions
9
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Precautions
Liability Note
READ ALL OF THIS MANUAL CAREFULLY BEFORE USING
THIS PRODUCT. IF THIS PRODUCT IS NOT USED
CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO
USERS OR BYSTANDERS.
Also, keep this manual in a safe place so that it can be easily
referred to during use of this product.
While all efforts have been made to ensure the accuracy of all
information in this manual, PFU assumes no liability to any
party for any damage caused by errors or omissions or by
statements of any kind in this manual, its updates or supple-
ments, whether such errors are omissions or statements
resulting from negligence, accidents, or any other cause. PFU
further assumes no liability arising from the application or use
of any product or system described herein; nor any liability for
incidental or consequential damages arising from the use of
this manual. PFU disclaims all warranties regarding the infor-
mation contained herein, whether expressed, implied, or statu-
tory.
Use of Mercury
To avoid unexpected injuries:
•Do not put the substance contained in the lamp in your mouth as
it has mercury.
•Do not breathe the chemical liquid contained in the scanner
lamps.
•Do not incinerate, crush, or shred the lamps or scanner parts.
Maintenance
The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner or an
authorized FUJITSU Image Scanner service provider to make
repairs to this product.
Lamp(s) inside this product contain mercury and must be
recycled or disposed of according to local, state, or federal
laws.
H
g

Precautions
10
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Warning Label
HOT warning label:
The glass surface inside the
ADF becomes hot during the
operation. Be careful not to
touch glass surfaces inside the
ADF.
To avoid burns, never touch
around the area indicated by
this label.
Take care not to get your
finger(s) caught in the ADF
while turning.
！
！
！You must NOT remove this warning label from your scanner.
When it gets old or unreadable by staining or scratches,
contact the store where you purchased the scanner or an
authorized FUJITSU scanner service provider.

Safety Information
11
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Safety Information
This manual describes important details for users to use this
product safely and correctly. Read this manual thoroughly
before you start using this product.
Be sure to read and fully understand the Safety Information, in
particular.
In addition, keep this manual handy during use of this product,
so that you can refer to it quickly when necessary.
Warning Indications Used In This Manual
The following indications are used in this manual to obviate any
change of accident or damage to you and/or the product.
The following are important warnings described in this manual.
This indication alerts operators to an operation
that, if not strictly observed, may result in severe
injury or death.
This indication alerts operators to an operation
that, if not strictly observed, may result in safety
hazards to personnel or damage to the product.
A TRIANGLE symbol indicates that special care and attention is
required.
The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows action which users
may not perform.
The drawing inside or under the circle shows the specific action
that is not allowed.
WARNING
CAUTION
ROutline characters on a colored background show instructions
users should follow.
It may also include the drawing that shows the specific instruc-
tion.
Description
Do not damage the power cable.
A damaged power cable may cause fire or electric shock. Do not
place heavy objects on power cable, or pull, bend, twist, heat,
damage or modify Power cables.
Do not use any damaged power cables or power plugs, or install
any cables or power plugs to loose wall sockets.
Use only specified power cables and interface
cables.
Use only specified power cables and interface cables. Failure to
use the correct cables might cause electric shock and/or equip-
ment failure.
Do not use the power cable provided with the scanner for other
devices, since this might cause equipment failure and other
troubles or an electric shock.
Make sure to ground the scanner.
Make sure to ground to avoid electric shock. Be sure to ground
before plugging into a power outlet.
Unplug from the outlet before removing the ground connection.
WARNING

Safety Information
12
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Use the scanner only at the indicated power volt-
age. Do not connect to multiple-power strips.
Use the scanner only at the indicated power voltage and current.
Improper power voltage or current might cause fire or electric
shock. Do not connect to multiple-power strips.
Do not touch the power cable with wet hands.
Do not touch the power plug with wet hands. Doing so might
cause electric shock.
Wipe off any dust from the power plug.
Wipe off any dust from the metal parts on the power plug or
metal fittings with a soft, dry cloth. Accumulated dust might
cause fire or electric shock.
Do not install the scanner in a location that has
oil smoke, steam, humidity, and dust.
Do not install the scanner in a location subject to oil smoke,
steam, humidity, and dust. Doing so might cause a fire or electric
shock.
Do not use the scanner if there is a strange odor.
If you detect excessive heat coming from the scanner or detect
smoke, strange smells or noises during the operation, immedi-
ately disconnect the power plug from the power outlet. Before
contacting the store where you bought the scanner or an autho-
rized FUJITSU scanner service provider, make sure that any
smoke coming from it has completely stopped. Never try fixing
such problems by yourself. Doing so is dangerous.
Disconnect the power if the scanner is damaged.
If the scanner is damaged for any reason, immediately discon-
nect the power plug from the power outlet. Then, contact the
store where you bought the scanner or an authorized FUJITSU
scanner service provider.
Description
Do not put liquids inside the scanner.
Do not insert or drop any metal objects into the ADF slot or
ventilation ports on the scanner.
Do not scan any wet documents or documents with paper clips
or staples attached.
Do not splash or allow the scanner to get wet.
If foreign objects (water, small metal objects, liquids, etc.) get
inside the scanner, immediately disconnect the power plug from
the power outlet. Then, contact the store where you bought the
scanner or an authorized FUJITSU scanner service provider.
Pay particular attention to this warning in households where
there are small children.
Unplug the scanner when a trouble occurs.
Immediately unplug the scanner when a trouble occurs.
Never cut the ground connection until the scanner is unplugged
from the power outlet.
Do not disassemble the scanner.
Do not take apart or modify the scanner. The inside of the
scanner contains high-voltage components.
Touching these components might cause electric shock or fire.
Do not use aerosol or alcohol sprays near the
scanner.
Do not use any flammable substance or alcohol based cleaning
sprays (such as aerosol sprays) to clean the scanner.
Sparks, caused by static electricity, generated when blowing off
dust and dirt from the outside of the scanner, may cause a fire.
Do not place the scanner within the reach of small
children.
To avoid injuries, do not place the scanner in an area where
small children may be able to reach.
Do not touch the heated section for a long time.
Do not touch the heated section such as the bottom of the
scanner for a long time.
Doing so may cause a low-temperature burn on your skin.
Description

Safety Information
13
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
The following are important cautions described in this manual:
Do not cover the scanner with something during
its operation.
Do not use the scanner while covered with a blanket, etc. Doing
so may raise the temperature inside and cause a fire.
Do not use the scanner where it gets wet.
Do not use the scanner at a place such as a bathroom, shower
room, or swimming pool where it may easily get wet. Doing so
might cause electric shock or fire.
Description
Description
Do not install the scanner on an unstable work
table.
When installing the scanner on a work table, make sure that the
table is flat and level. Place the scanner so that none of its parts
extend beyond the edge of the table.
Also, it must be strong enough to support the weights of the
scanner and other devices.
Firmly insert the power plug.
Firmly insert the power plug into the power outlet as far it can go.
Do not block the ventilation ports.
Do not block the ventilation ports. Blocking the ventilation ports
generates heat inside of the scanner, which may result in fire or
scanner failure.
Do not place heavy objects or stand on the top of
the scanner.
Do not place heavy objects on the scanner or stand on its top to
perform other work.
Doing so might cause injuries and equipment failure.
Do not use the scanner immediately after moving
it from a cold place into a warm room.
Do not use the scanner immediately after moving it from a cold
place into a warm room.
Condensation may occur, which might lead to scanning errors.
Let the scanner dry for one or two hours before you use it.
CAUTION

Safety Information
14
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Before moving the scanner, disconnect the power
plug from the power outlet.
Do not move the scanner with the power and interface cables
connected as this can damage the cables, which can later cause
fire, electric shock as well as injuries.
Before moving the scanner, be sure to disconnect the power
plug from the power outlet, and all other interface cables. Make
sure that the floor is free of any obstructions.
Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields and other
sources of electronic noise. Also, protect the scanner against
any static electricity, which can cause the scanner to malfunc-
tion.Choose a static-free place to install the scanner.
Avoid any contact when scanner is in use.
Avoid getting a sleeve, necktie, or hair caught up in any scanner
mechanism during scanning since this may cause injuries.
Disconnect the power plug from the power outlet
when the scanner is not in use for a long period
of time.
When the scanner is not going to be used for a long period of
time, be sure to disconnect the power plug from the power
outlet.
Do not install the scanner in direct sunlight.
Do not install the scanner under direct sunlight or near heating
apparatus. Doing so might cause excessive heat to build up
inside the scanner, which can cause scanner trouble or even
fire. Install the scanner in a well-ventilated location.
Do not try to move or lift the scanner alone.
When transporting the scanner, never carry it alone.
Description
Before moving the scanner, make sure the trans-
port lock is locked. (Flatbed type)
When moving the scanner, be sure to lock the transport lock and
the ADF transport lock in order to prevent damage to the
scanner.
Handle documents carefully.
When handling documents, be careful not to cut your fingers
with them.
Do not make the scanner wet while carrying it
outside.
When carrying the scanner outside while it is raining or snowing,
pay special attention so the scanner does not get wet.
Description

Contents
15
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Contents
How to Use This Manual ........................................ 2
Introduction ............................................................. 3
Regulatory Information ........................................... 5
Conventions ............................................................ 7
Precautions ............................................................. 9
Safety Information ................................................ 11
Chapter 1 Scanner Overview............................ 20
1.1 Features .............................................................21
Features ............................................................... 21
1.2 Scanner Parts and Their Functions ................. 22
fi-6670/fi-6670A (ADF Type) ................................ 22
fi-6770/fi-6770A/fi-6750S (Flatbed Type) ............. 24
Model-Common Parts .......................................... 27
1.3 Functions of the Operator Panels .................... 28
Operator Panel ..................................................... 28
Indications on the Function Number Display ........ 30
1.4 Turning the Scanner ON and OFF ...................31
Turning the Scanner ON...................................... 31
Turning the Scanner OFF..................................... 31
1.5 Power Save Mode ..............................................32
Returning from Power Save Mode ....................... 32
1.6 Basic Flows of Scanning Documents ............. 33
Chapter 2 Loading Documents ........................ 38
2.1 Loading Documents on the ADF ......................39
2.2 ADF-Loaded Documents .................................. 42
Sizes..................................................................... 42
Paper Quality........................................................ 42
Maximum Document Loading Capacity................ 44
Area Not to be Perforated .................................... 44
Loading Documents with Tabs or Non-Rectangular
Documents ........................................................... 45
Multifeed Detection Conditions............................. 45
Limiting the Background Color Area..................... 46
Job Separation Sheet........................................... 47
2.3 Changing the ADF Position
(Flatbed Type Only) ........................................... 48
2.4 Loading Documents on the Flatbed
(Flatbed Type Only) ........................................... 50
Chapter 3 How to Use ScandAll PRO .............. 51
3.1 Overview of ScandAll PRO ............................... 52
3.2 Launching ScandAll PRO ................................. 53
3.3 Selecting a Scanner Driver ............................... 54
3.4 Selecting a Scanner Model ............................... 55
3.5 Scan Parameters ............................................... 56
3.6 Scanning Approaches ...................................... 57
Scanning with [Scan]............................................ 57
Scanning with [Batch Scan].................................. 57
3.7 Scanning with [Scan] ........................................ 58

Contents
16
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
3.8Scanning with [Batch Scan] ............................. 61
Creating and Editing Profiles................................ 61
Scanning Documents ........................................... 62
Chapter 4 Scan Parameters.............................. 63
4.1 FUJITSU TWAIN 32 Scanner Driver ................. 64
Resolution ............................................................ 64
Scan Type ............................................................ 64
Paper Size............................................................ 65
Image Mode ......................................................... 65
[Scan] Button........................................................ 65
[Preview] Button ................................................... 65
[Close]/[OK] Button............................................... 65
[Reset] Button....................................................... 65
[Help] Button......................................................... 65
[About] Button....................................................... 65
[Option] Button ..................................................... 66
[Advance] Button .................................................. 66
[Config] Button...................................................... 66
4.2 FUJITSU ISIS Scanner Driver ...........................67
[Main] Tab ............................................................ 67
[Layout] Tab ......................................................... 68
[Image Processing] Tab ....................................... 69
[Paper Handling] Tab ........................................... 69
[Gamma] Tab ....................................................... 70
[Color Dropout] Tab.............................................. 70
[Blank Page Deletion] Tab.................................... 71
[Compression] Tab ............................................... 71
[Imprinter] Tab ...................................................... 72
[About] Tab........................................................... 72
Chapter 5 Various Documents ......................... 73
5.1 Summary ............................................................ 74
5.2 Scanning Documents of Different Types or
Sizes .................................................................... 75
Scanning Both Sides of A Document
(fi-6670/fi-6670A/fi-6770/fi-6770A Only)............... 75
Scanning A Large-Size Document or Book
(Flatbed Type Only).............................................. 75
Scanning Documents of Different Widths............. 76
Scanning A Document Longer Than A3 Size....... 77
5.3 Advanced Scanning .......................................... 79
Excluding Color(s) from Images (Dropout Color) . 79
Skipping Blank Pages .......................................... 81
Removing Punch Holes from A Scanned Image.. 82
Scanning A Document from the ADF in Manual
Loading Mode....................................................... 84
Duplex Scanning Using the ADF Virtual Duplex
Function (fi-6750S Only) ...................................... 85
5.4 Setting Post-Scan Operations and Handling .. 87
Automatically Correcting Skewed Document
Images.................................................................. 87
Setting Auto Correction for Document Page
Orientations.......................................................... 89
Saving Scanned Images in PDF Format.............. 90
Dividing Multipage Documents Using Patch
Codes................................................................... 95
Dividing a Multipage Document Using Barcodes . 97

Contents
17
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Horizontally Splitting a Scanned Image into Two100
Outputting in Multi-Image Mode ......................... 101
Setting Auto Detection for Content Colors
(Color/Monochrome) .......................................... 103
5.5 Customizing the Hardware Settings .............. 106
Using the Scanner Buttons to Start A Scan
Quickly................................................................ 106
Detecting Multifeeds........................................... 108
Bypassing Multifeed Detection for a Fixed
Format ................................................................ 110
Chapter 6 Daily Care ....................................... 114
6.1 Cleaning Materials and Locations
Requiring Cleaning ......................................... 115
Cleaning Materials.............................................. 115
Locations to Clean and Cleaning Frequency ..... 116
6.2 Cleaning the ADF ............................................117
Cleaning with a Cloth Moistened with Cleaner
F1 ....................................................................... 117
6.3 Cleaning the Flatbed (Flatbed Type Only) .... 122
Chapter 7 Consumables ................................. 123
7.1 Consumables and the Replacement
Cycles ...............................................................124
7.2 Replacing the Pick Rollers ............................. 125
7.3 Replacing the Brake Roller ............................. 127
Chapter 8Troubleshooting............................. 129
8.1 Paper Jams ......................................................130
8.2 Errors Indicated on the Operator Panel ........ 132
Temporary Errors ............................................... 133
Device Errors...................................................... 134
8.3 Troubleshooting .............................................. 136
Scanner cannot be turned on............................. 137
Indication on Function Number Display
goes out.............................................................. 138
Scanning does not start...................................... 139
Quality of scanned pictures or photos is not
satisfactory when scanning in black and white... 140
Quality of scanned text or lines is unsatisfactory.141
Images are distorted or blurred. ......................... 142
Vertical lines appear in scanned images............ 143
Function Number Display indicates an error
code (alphabetical letter plus number) alternately
after the scanner is turned ON. .......................... 144
Multifeed errors occur frequently........................ 145
Pickup errors occur frequently............................ 147
Paper jams occur frequently............................... 148
Scanned images are elongated when scanned
from the ADF...................................................... 149
There is a shadow on leading edge of scanned
image.................................................................. 150
The scanner is not recognized by your computer
when Kofax VRS is used.................................... 151
8.4 Before Contacting Your Dealer or Scanner
Service Provider .............................................. 152
General Details................................................... 152
Troubles ............................................................. 152

Contents
18
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
8.5 Checking Labels on the Scanner ................... 154
Positions of Labels on the Scanner.................... 154
Chapter 9 Operational Settings...................... 155
9.1 Starting Up the Software Operation Panel .... 156
9.2 Configurable Items ..........................................157
Device Setting .................................................... 157
Device Setting 2 ................................................. 159
9.3 Settings Related to Consumables and
Useful Life Counters ........................................165
Confirming and Resetting the Counters ............. 165
Cycle for Cleaning the Scanner [Cleaning Cycle]167
Cycle for Replacing the Consumables
[Useful life counter]............................................. 168
9.4 Settings Related to Scanning ......................... 169
Adjusting the Starting Position for Scanning
[Offset/Vertical Magnification Adjustment].......... 169
Eliminating Shadows or Stripes on the Scanned
Image Edge [Page Edge Filler] .......................... 171
Scanning with Particular Color(s) Dropped Out
[Dropout color].................................................... 172
Shorting the Scanning Intervals [Pre-Pick]......... 173
Cropping the Image Boundary
[AutoCrop Boundary].......................................... 174
Configuring the Data Transfer Width
[SCSI Bus Width]................................................ 175
Scan Setting for Documents with Tabs or Non-Rect-
angular Documents [Scan Setting for Documents
with Tab (Automatic Paper Size Detection)]....... 175
Scan Setting for The Document Whose One
Side Is in Dark Background Color [Scan Setting for
Document in Dark Background Color]................ 176
Adjusting the Scanned Document Output Images
[Overcrop/Undercrop]......................................... 177
Adjusting the Paper Picking Pressure
[Pick Pressure] ................................................... 178
9.5 Settings Related to Multifeed Detection ........ 180
Multifeed Detection............................................. 180
Specifying the Multifeed Detection Range
[Document Check Area Specification for
Multifeed Detection]............................................ 182
Setting A Non-Multifeed-Detection Range
[Intelligent Multifeed Function]............................ 185
9.6 Settings Related to Wait Time ........................ 186
Timeout for Manual Feeding
[Manual-feed timeout]......................................... 186
Setting the Wait Time in Power Saving Mode
[Power saving].................................................... 187
9.7 Settings Related to Power ON/OFF Control .. 188
Power ON/OFF Control [Power SW Control] ..... 188
Appendix ........................................................... 189
A.1 Basic Specification ......................................... 190
A.2 Installation Specification ................................ 192
A.3 Outer Dimensions ........................................... 193
ADF type ............................................................ 193
Flatbed type........................................................ 194
A.4 Scanner Options .............................................. 195

Contents
19
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
A.5 Uninstalling the Software ............................... 196
Glossary ............................................................ 197

Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Chapter 1 Scanner Overview
This chapter describes the components of the scanner, showing their names and functions, and explains the basics of how
to operate them.
Here, Windows Vista screen samples are used to explain the operations. The screens and operations may differ slightly if
the OS that you are using is other than Windows Vista. Take note that, when the FUJITSU TWAIN32 or FUJITSU ISIS
scanner driver is updated, the screens and operations herein may also be slightly different. In such case, refer to the
relevant manuals or materials, which are to be supplied when updating the driver.
1.1 Features .................................................................................21
1.2 Scanner Parts and Their Functions........................................22
1.3 Functions of the Operator Panels...........................................28
1.4 Turning the Scanner ONand OFF..........................................31
1.5 Power Save Mode...................................................................32
1.6 Basic Flows of Scanning Documents .....................................33