Fujitsu PFU fi-5110C Configuration guide

Cleaning Instructions for
fi-5110C Scanner
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Consumables Part Number
Consumable Kit CON-3360-001A
Cleaning Kit SC-CLE-WGD
Using F1 Impregnated Cleaning Wipes

Pad Assy
Wipe downwards. When cleaning take care to prevent the cleaning wipe from catching on the
metal parts


BEFORE CLEANING
Open the ADF while pulling the cover open lever
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Pick Roller
Clean lightly taking care not to scratch the surface of the roller and the Myler sheet.
P.T.O.

Plastic Rollers x 4
Clean lightly while rotating with your finger. Take care not to roughen the surface.




Plastic
Feed Rollers
Glass
Pick Roller
Pad Assy

Turn the Scanner OFF while cleaning the following locations


Feed Rollers x 2
Clean lightly while rotating with your finger. Take care not to roughen the surface.
For further information please refer to the
fi-5110C Scanner Operators Guide
which can be found on our Website:
http://www.fujitsu.com/emea/products/
January 2010
Using F1 Impregnated Cleaning Wipes
Turn the Scanner ON while cleaning the following locations
PFU Imaging Solutions Europe Ltd Cleaning Instructions for fi-5110C Scanner
Open the ADF when the indication of the Function Number
display is not “P” or “O”.
Simultaneously hold down the “Send to” and “Scan” buttons on
the operator panel. The Feed Rollers will start to rotate slowly
Hold a cleaning wipe against the surface of the rotating rollers,
lightly cleaning the surface.
As a guideline, 6 presses of the “Send to” and“Scan” buttons
make the rollers rotate one full turn




Plastic
Feed Rollers
Glass
Pick Roller
Pad Assy

Function Number Display
Function
Send to
Scan LED Power
Button