Fujitsu S510M - ScanSnap - Document Scanner Configuration guide

BEFORE CLEANING
Open the ADF while pulling the cover open lever
Paper
Chute
Cover
ADF Cover
Cover Open
Lever
2
3
4
1Pad Assy
Wipe downwards. When cleaning take care to prevent the cloth from catching on the metal parts.
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Clean lightly taking care not to scratch the surface.
Pick Roller
Clean lightly while rotating with your finger. Take care not to roughen the surface.
Plastic Rollers x 4
Turn the Scanner OFF while cleaning the following locations
Using cleaning paper moistened with F1 Cleaner
Cleaning Instructions for
ScanSnap S510M
62
3
4
1
5
Pad Assy
Plastic
Rollers
Pick Roller
Feed Rollers
Glass
Eject Rollers
P.T.O.
Parts Part Number
Consumables
Pad PA03360-0002
Pick Roller PA03360-0001
Cleaning Kit SC-CLE-KIT1
It is recommended that these items be
cleaned EVERY 1,000 SCANS

While holding down the SCAN button
Press the POWER button
Rollers will rotate
To rotate the Feed and Eject Rollers, press the POWER button while holding down the
SCAN button.
As a guideline, six presses of the POWER button make the rollers rotate one full turn.
6
5Clean lightly taking care not to roughen the surface.
Feed Rollers x 2
Turn the Scanner ON while cleaning the following locations
Clean lightly taking care not to roughen the surface.
Eject Rollers x 2
1
2
Using cleaning paper moistened with F1 Cleaner
For further information please refer to the
ScanSnap S510M Image Scanner Operators Guide
which can be found on our Website:
www.fel.fujitsu.com/scanner
July 2007
Cleaning Instructions for ScanSnap S510MFujitsu Europe LImited
62
3
4
1
5
Pad Assy
Plastic
Rollers
Pick Roller
Feed Rollers
Glass
Eject Rollers