Fujitsu BS2000 SE700 User manual

Edition September 2015
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.vor
English
SE700 / SE500 / SE300
Quick Guide
FUJITSU Server BS2000
User Guide
Valid for:
M2000 V6.0A / V6.1A
X2000 V6.0A / V6.1A
HNC V6.0A / V6.1A

Comments…Suggestions…Corrections…
The User Documentation Department would like to know your
opinion on this manual. Your feedback helps us to optimize our
documentation to suit your individual needs.
Feel free to send us your comments by e-mail to:
[e-mail]
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system which
complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
This manual is printed
on paper treated with
chlorine-free bleach.
Copyright © 2015 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
The Xen® mark is a trademark of Citrix Systems, Inc., which manages the mark on behalf of the Xen open source
community. The Xen® mark is registered with the U.S. Patent and Trademark Office, and may also be registered in
other countries.
Novell and SUSE are registered trademarks of Novell, Inc. in the USA and other countries.
Linux is a registered trademark of Linus Torvalds.
Windows® is a registered trademark of Microsoft Corporation.
The Linux-based basic software M2000, X2000, and HNC which is installed on the Management Unit, Server Unit
x86, and HNC contains Open Source Software. The licenses for this can be found in the LICENSES directory on the
relevant installation DVD.

U41857-J-Z125-1-76
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
10. September 2015 Stand 12:31.06 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.ivz
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Objective and target groups of this manual . . . . . . . . . . . . . . . . . . . . . . 7
1.2 Summary of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.4 Names and abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 Architecture of the SE servers and networks . . . . . . . . . . . . . . . . . . . . 11
2.1 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2 Architecture of SE servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.3 Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.4 Operating the SE Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.4.1 Calling the SE Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.4.1.1 Logging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.4.1.2 Logging out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.4.2 Working with the SE Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.4.2.1 Main window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.4.2.2 Terminal window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.4.2.3 Calling an object or function in the SE Manager . . . . . . . . . . . . . . . . . . 22
2.4.2.4 Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.4.2.5 Authorizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.4.2.6 Calling the online help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Contents
U41857-J-Z125-1-76
3 Power-on, starting up BS2000, shutdown . . . . . . . . . . . . . . . . . . . . . . 25
3.1 Powering on the Management Unit remotely . . . . . . . . . . . . . . . . . . . . 25
3.2 Powering on the Management Unit via the local console . . . . . . . . . . . . . . 28
3.3 Powering on Server Units and other units . . . . . . . . . . . . . . . . . . . . . . 29
3.4 Starting up BS2000 (SU /390) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3.5 Starting up BS2000 (SU x86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3.6 Opening and terminating BS2000 dialog . . . . . . . . . . . . . . . . . . . . . . . 38
3.7 Shutting down BS2000 via the BS2000 console . . . . . . . . . . . . . . . . . . . 40
3.8 Powering off Server Units and other units . . . . . . . . . . . . . . . . . . . . . . 41
3.9 Messages on the BS2000 console . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4 Setting the system time or configuring the NTP . . . . . . . . . . . . . . . . . . 43
5 Application Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5.1 Powering the Application Unit on and off via the iRMC . . . . . . . . . . . . . . . 45
5.2 Embedding an application or link in the SE Manager . . . . . . . . . . . . . . . . 47
Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

U41857-J-Z125-1-76 5
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
10. September 2015 Stand 12:30.45 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.k01
1 Introduction
With the completely newly developed FUJITSU Server BS2000 SE Series, FUJITSU now
offers a server infrastructure which consists of three server lines. Under the umbrella of this
SE infrastructure, multiple application scenarios are possible in various combinations for
both mainframe applications and applications of the open world. This new platform stands
out on account of the unrivaled performance scalability (scale-up and scale-out), and
ensures that users can manage their application workloads securely, quickly and efficiently
across technological boundaries with maximum availability.
One major aim in developing the SE series was to provide a uniform management strategy
which offers customers significant added value through maximum integration, and
guarantees extremely cost-effective operation of their IT.
The new SE server line succeeds the tried and tested S and SQ server lines, integrating
the advantages of both lines in an optimal manner. The heart of the SE series is formed by
the /390-based Server Units, the x86-based Server Units, the Net Unit, and the
Management Unit (MU). All components are integrated into a standard 19" rack and are
supplied to customers ready to use. With its newly developed processors and appreciably
higher system performance, the new generation of the SE series offers enhanced
configuration options, maximum availability and, not least of all, significantly reduced power
consumption.
Depending on requirements, the SE server contains all the system components needed for
operation as an overall application:
– Server Unit /390 for BS2000 guest systems
– Server Unit x86 with BS2000, Linux or Windows guest systems
– Application Units x86 for operating Native or hypervisor systems (e.g. Linux, Windows,
VMware, OVM, etc.)
– Shareable tape and disk periphery
– A high-speed, server-internal infrastructure to connect the components with each other
and with the customer's IP and FC networks.

Introduction
6 U41857-J-Z125-1-76
The SE server offers the following advantages:
– Cross-system administration with state-of-the-art, browser-based GUI (SE Manager) as
a single point of operation
– Joint system monitoring of all components
– Uniform redundancy strategy
– Joint service process
– All options for consolidation through virtualization
– SE components and infrastructure are
–
SE servers consequently enable flexible and application-specific implementation which
fulfills high SLAs through the use of high-end components and an end-to-end redundancy
concept, and nevertheless permits cost-effective operation of the overall system with few
resources thanks to its uniformity.
Intel x86-based server systems with their VMware, Linux or Windows system platforms also
profit from the concepts for stable system operation tested on the mainframe:
– Selection of high-quality server components
– Redundant hardware components
– Prepared operating concepts which also include high availability
– Comprehensive tests before release
– Comprehensive service concept.
The management interface which is uniform for all SE servers, the SE Manager, permits a
view of all the system components involved and, from this higher-level perspective, enables
the resources to be optimized through efficient distribution of the application to the systems
which are currently utilized least.
SE servers consequently permit particularly stable system operation which includes not
only the mainframe platforms which have to date been known to be particularly failsafe, but
also other Server Units and the infrastructure and peripherals employed by the SE server.
This can be achieved with fewer resources for administration and system operation than for
separate operation of different IT systems.

Introduction Objective and target groups of this manual
U41857-J-Z125-1-76 7
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
10. September 2015 Stand 12:30.45 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.k01
1.1 Objective and target groups of this manual
This Quick Guide is intended for people who operate an SE server:
●As administrator you manage the entire SE server with all its components and the
operating systems which run on it. You need a good knowledge of the BS2000, Linux
and Windows operating systems and of the network and peripherals.
As administrator you can also manage the integration of the optional Application Units
on which an open operating system (by default Linux) runs in Native mode or in a
virtualized manner (e.g. under VMware® vSphere 5).
●For other users, roles are provided with a customized selection of functions (e.g.
operator, AU administrator, etc.) to permit the assigned tasks to be performed.
This Quick Guide assumes the following:
●Customer Support provides the customer with the SE server.
●The desired BS2000 operating mode is set on each Server Unit.
●A BS2000 system is configured and fully operational.
●All necessary BS2000 devices are configured.
1.2 Summary of contents
Chapter 2 contains fundamental information which is relevant for all readers.
The chapters below describe fundamental functions which enable you to ensure the SE
server is ready to operate. Detailed knowledge, as described in the “Operation and
Administration” manual [5], is not required.
Detailed information on the data displayed, the dialog boxes, and operation of the SE
Manager is provided in the online help of the SE Manager.
Further information is provided in related publications for the SE servers in the chapter
„Related publications“ auf Seite 49.

Summary of contents Introduction
8 U41857-J-Z125-1-76
README file
For information on any functional changes or extensions to this manual, please refer to the
product-specific Readme file.
In addition to the product manuals, Readme files for each product are available to you
online at http://manuals.ts.fujitsu.com. You will also find the Readme files on the Softbook
DVD.
Information under BS2000
When a Readme file exists for a product version, you will find the following file on the
BS2000 system:
SYSRME.<product>.<version>.<lang>
This file contains brief information on the Readme file in English or German (<lang>=E/D).
You can view this information on screen using the /SHOW-FILE command or an editor.
The /SHOW-INSTALLATION-PATH INSTALLATION-UNIT=<product> command shows the user
ID under which the product’s files are stored.
Additional product information
Current information, version and hardware dependencies and instructions for installing and
using a product version are contained in the associated Release Notice. Release Notices,
in particular those relating to BS2000 OSD/XC, M2000, X2000, and HNC, are available at
http://manuals.ts.fujitsu.com.

Introduction Notational conventions
U41857-J-Z125-1-76 9
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
10. September 2015 Stand 12:30.45 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.k01
1.3 Notational conventions
The following notational conventions are used in this manual:
[ ] The titles of related publications in the text are abbreviated. The complete title of
each publication which is referred to by a number is listed in the Related
Publications chapter after the associated number.
IThis symbol indicates important information and tips which you should bear
in mind.
V This symbol and the word CAUTION! precede warning information. In the
interests of system and operating security you should always observe this
information.
ÊThe action which you must perform is indicated by this symbol.
italics Texts from the SE Manager (e.g. menu name, tab)
monospace System inputs and outputs
monospaced
semibold
Statements which are entered via the keyboard are displayed in this font.
<abc> Variables which are replaced by values.
[Key symbols] Keys are displayed as they appear on the keyboard. When uppercase letters
need to be entered, the Shift key is specified, e.g. [SHIFT] - [A] for A. If two
keys need to be pressed at the same time, this is indicated by a hyphen
between the key symbols.

Names and abbreviations Introduction
10 U41857-J-Z125-1-76
1.4 Names and abbreviations
Because the names are used frequently, for the sake of simplicity and clarity the following
abbreviations are employed:
●SE server for the FUJITSU Server BS2000 SE Series (Server Units /390 and x86) with
the following models:
●SE300 for FUJITSU Server BS2000 SE300 (with SU300, optionally AUs)
●SE500 for FUJITSU Server BS2000 SE500 (with SU500, optionally SU300 and
AUs)
●SE700 for FUJITSU Server BS2000 SE700 (with SU700, optionally SU300 and
AUs)
●SU for the Server Unit irrespective of the unit type
A distinction is made between SUs depending on the unit type:
●SU /390 for Server Unit /390 (type of Server Unit with one or more /390 processors)
●SU x86 for Server Unit x86 (type of Server Unit with one or more x86 processors)
A distinction is made between the following SUs according to models:
●SU300 for the Server Unit of the unit type SU x86 in SE300, optionally in SE500 and
SE700
●SU500 for the Server Unit of the unit type SU /390 in SE500
●SU700 for the Server Unit of the unit type SU /390 in SE700
●MU for the Management Unit. The MU permits central, user-friendly and cross-system
management on the SE server.
●AU for the Application Unit (with x86-based hardware)
●HNC (High Speed Network Connect) connects the SU /390 with the LAN and as a net
client also permits access to the Net-Storage. HNC designates both Linux-based basic
software and the hardware unit itself on which this basic software executes.
●BS2000 server as the generic term for all SE servers and the existing S and SQ
servers. BS2000 servers are operated with the relevant BS2000 operating system.
●BS2000 for the BS2000 OSD/BC operating system in compound nouns, e.g. BS2000
system.

U41857-J-Z125-1-76 11
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
10. September 2015 Stand 12:59.32 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.k02
2 Architecture of the SE servers and networks
2.1 Hardware
A FUJITSU Server BS2000 of the SE Series (SE server for short) consists of the following
components:
●Management Unit (MU) with SE Manager
One or two MUs with redundant SKP functionality can be installed.
●Server Units
– A /390-based Server Unit (SU /390) enables operation of BS2000 (Native BS2000
or VM2000).
– An x86-based Server Unit (SU x86) enables operation of BS2000 (Native BS2000
or VM2000). XenVM operation with Linux or Windows guest systems is also
possible as an option.
●Application Units (AUs)
AUs can be operated on the SE server. An AU permits operation of applications under
Linux, Windows, VMware or other hypervisors.
●Net Unit
For the SU /390 the Net Unit also contains HNCs.
●Rack console and KVM switch
●Peripherals (storage)
●Optional hardware components:
ETERNUS JX40 (for SU x86, AU), ETERNUS LT40 S2 (for SU x86), FC switches

Architecture of SE servers Architecture of the SE servers and networks
12 U41857-J-Z125-1-76
2.2 Architecture of SE servers
Bild 1: Architecture of SE servers
The SE Manager of each MU enables you to operate and manage all components of the
SE server centrally.
The Net Unit offers maximum performance and security for internal communication in an
SE server and for a connection to customer networks (IP networks).
Redundant Management Unit (MU) with SE Manager
Customer network
Net Unit
SE Server
(IP networks)
Management Unit (MU) with SE Manager
Redundant Net Unit
BS2000
Linux
Windows
Disk
Tape
Disk
VMware, Citrix,
Hyper-V, OVM ...
Further optional
peripherals
VM2000
Xen
VM2000
Windows
Linux
BS2000 BS2000
Peripherals
Application
Server Unit x86Server Unit /390
Unit (AU)
(SU /390) (SU x86)

Architecture of the SE servers and networks Networks
U41857-J-Z125-1-76 13
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
10. September 2015 Stand 12:59.32 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.k02
2.3 Networks
The Net Unit implements the connection of the units to the networks of the SE server and
to customer networks. In addition, private networks are available for internal communication
in the SE server.
The following logical networks are supported:
– Data Network Public
– Data Network Public (DANPU): when required, up to 8 additive networks
DANPU<n> (where <n>= 01..08) can be configured for connecting applications to
the public customer network.
– Data Network Private
– Data Network Private (DANPR): when required, up to 99 networks DANPR<n>
(where <n>= 01..99) can be configured for internal private customer networks for
SE servers.
– Public management networks
– Management Administration Network Public (MANPU) for administrative access to
the MU, BS2000 systems and AUs
– Management Optional Network Public (MONPU): the additive administration
network can be configured when required (e.g. when AIS Connect is not to be
operated via MANPU but over a separate network).
– Management Network Private
– Management Control Network Local (MCNLO) for the local SE server
communication
– Management Control Network Private (MCNPR) for SE server communication
– Management Optional Network Private (MONPR): when required, up to 8 additive
networks MONPR<n> (where <n>= 01..08) can be configured for SE server
communication.
– Management SVP Network Private (MSNPR) enables SVP communication to the
SU /390 on SE700/SE500

Networks Architecture of the SE servers and networks
14 U41857-J-Z125-1-76
Bild 2: Block diagram of the Net Unit
The networks are protected, i.e. the use of different networks means that components of
one network cannot influence the components of another network.
The services for the various networks DANPU<xx>, MANPU, MONPU, DANPR<xx> and
MONPR<xx> can be further restricted at Net Unit level by means of the ACL (Access
Control List).
The base operating system of the HNC and SU x86 can only be reached over the internal
networks and are thus protected from the customer networks.
In addition to the connections of the units to the switches of the Net Unit (for use by the
guest systems), direct cabling from the units to the customer network can also be used.

Architecture of the SE servers and networks Operating the SE Manager
U41857-J-Z125-1-76 15
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
10. September 2015 Stand 12:59.32 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.k02
2.4 Operating the SE Manager
2.4.1 Calling the SE Manager
ÊEnter the address of the SE server in the address bar of the browser.
IIf the browser now displays a warning about the security certificate, click
Continue to this website.
In M2000 V6.1 and higher the administrator can grant access to the MU (applies
for the SE Manager and CLI) explicitly only for specific IP addresses or
networks. If your PC is not defined in the access list, access is denied.
ÊPress the Enter key.
The connection is set up. The login window is opened. The login window provides
access to the web application. It has a different format from the other windows:
The login window is also displayed to permit you to log in again if you have logged out or
the session was terminated owing to inactivity.

Operating the SE Manager Architecture of the SE servers and networks
16 U41857-J-Z125-1-76
2.4.1.1 Logging in
Access to the SE Manager is protected. You must log in with your account and the
associated password.
Exception: You can call the SE Manager help even if you are not logged in.
ÊEnter your account in the login window.
ÊEnter your password.
IWhen the SE server is supplied, the default account admin exists for the
administrator. The password set for this account is admin.
Change the password immediately after you have logged in for the first time.
As administrator you can create further accounts for the roles administrator,
BS2000 administrator (in M2000 V6.1A or higher), operator, XenVM administrator,
and AU administrator (in M2000 V6.1A or higher).
The BS2000 administrator, operator, XenVM administrator, and AU administrator
roles have restricted rights which are tailored to their different task areas. For an
operator account, you can extend the rights for granting individual authorizations
(e.g. access to particular BS2000 systems, SVP access).
Details of managing the users, passwords, and the individual authorizations are
provided in the “Operation and Administration” manual [5].
ÊClick Log in.
The Dashboard tab opens as the welcome page. It provides a quick overview of the
systems, units, IP networks, FC networks, storage, and users of the SE server. The
information displayed is described in the SE Manager help.
Information on the topic of "session management" is provided in the “Operation and
Administration” manual [5].

Architecture of the SE servers and networks Operating the SE Manager
U41857-J-Z125-1-76 17
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
10. September 2015 Stand 12:59.32 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.k02
2.4.1.2 Logging out
Logging out explicitly
ÊIn the header area of the SE Manager main window click Log out to terminate the
session. See section “Main window” on page 18.
The login window opens.
Logging out because of a session timeout
If you do not log out explicitly, the session terminates if there is no activity for 20 minutes,
i.e. if the SE Manager registers no action in this time.
IWhen you want to start an action in the SE Manager after a session has timed out,
first the login window window appears, and you must log in again. Only after you
have done this will the action be executed.
Each user can change this setting for himself/herself in the range from 5 through 60 minutes
or exclude it:
ÊClick in the login information in the header area. A list containing the menu item
Individual settings opens.
ÊClick Individual settings. The Change update cycle and session timeout dialog box opens in
which you can enable/disable the session timeout and set the timeout in the range from
5 to 60 minutes.
The individual setting is stored in the SE Manager on a user-specific basis. Information
on the topic of "individual settings" is provided in the “Operation and Administration”
manual [5].
2.4.2 Working with the SE Manager
The section below describes the most important terms of the SE Manager interface and
working with the SE Manager. Detailed information on operating the SE Manager is
provided in the “Operation and Administration” manual [5].
Various window types are used in the SE Manager:
●Login window: a window in which you log in using your account and password.
See section “Logging in” on page 16.

Operating the SE Manager Architecture of the SE servers and networks
18 U41857-J-Z125-1-76
●Main window: a window which is always visible between logging in and logging out on
the SE Manager; it contains the navigation elements and the workarea in which
information is output and actions are initiated.
See section “Main window” on page 18.
●Terminal window: Window which is opened from the SE Manager and enables access
to the BS2000 console, BS2000 dialog, SVP console or the MU shell. A terminal
window remains opened irrespective of the SE Manager session.
See section “Terminal window” on page 21.
●Dialog/Wizard: a window which opens when an action starts and closes again after the
action has been completed. It is also used to output error messages concerning the
action being performed. A wizard is a utility which takes you through a task in a number
of steps (dialog boxes).
●Online help window: a window which opens when the online help is called.
See section “Calling the online help” on page 23.
2.4.2.1 Main window
The main window of the SE Manager opens as soon as you have logged in on the SE
Manager. The next two figures provide an example to name the areas in the main window
and the principle controls.
SE Manager: areas in the main window
12
3
4
ab cdef

Architecture of the SE servers and networks Operating the SE Manager
U41857-J-Z125-1-76 19
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
10. September 2015 Stand 12:59.32 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303905_Kurz\se_kurz_e\se_kurz.k02
1: Tree structure
Main menus for selecting objects which are displayed in the working area
2: Tabs
Tabs for selecting objects which are displayed in the working area.
The update icon (rotating wheel) is displayed on the right-hand edge while the data
is being updated automatically.
3: Header area
Contains general information and settings for the SE Manager:
4: Working area
Displays data and enables dialog boxes and wizards to be opened to execute
actions.
a Click the icon to hide or display the tree structure again.
bManagement Unit (<unit name>) [location] provides information about the
Management Unit via which you are currently operating the SE Manager.
<unit name> is the name of the Management Unit.
If a location is configured with SYSLOCATION, <location> displays the
entry.
If the field ends with the arrow icon, redundant Management Units are
available. Click the field to obtain a list with links to the available
Management Units.
c Displays the login information: user account or, if defined, the person-
related name of the user account.
Click the login information and Individual settings in the following pop-up. In
the subsequent dialog box you can set the cycle of the automatic update
and the session timeout for your user account.
A tool tip for login information displays the values currently set.
dClick Logout to end the session.
e Clicking the language option displayed (DE or EN) switches the web
interface to the language selected.
fClick Help to open the SE Manager help in a new tab.

Operating the SE Manager Architecture of the SE servers and networks
20 U41857-J-Z125-1-76
SE Manager: elements of the main window
1Active main menu of the tree structure
2Active tab
3Update icon to manually update the displayed information. This icon is displayed when the
automatic update is suspended. If the automatic update is active, the rotating wheel is
briefly displayed as an update icon in the rhythm of the update.
4Help icon for calling the SE Manager help on a context-sensitive basis (see page 23)
5
a, b
The information is subdivided into groups (in the example above, 5a and 5b). Each group
contains one or more tables with properties of the objects displayed.
6Icons for triggering actions
7Number of entries in the table Total: <n> or Total <objects>: <n>
1
2
7
6
3
4
5a
5b