Fujitsu S540 User manual

Thin Client
Operating Manual
FUJITSU Thin Client FUTRO S540
FUJITSU Thin Client FUTRO S740

Thank you for buying an innovative product from Fujitsu.
Latest information about our products, useful tips, updates etc. is available
on our website: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy using your new Fujitsu system!

Published by / Contact address in the EU
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
"http://www.fujitsu.com/fts/"
Copyright
©Fujits
u Technology Solutions GmbH 2019. All rights reserved.
Publication Date
02/2019
Order No.: A26361-K1080-Z320-1-7619, edition 2

FUJITSU Thin Client FUTRO S540
FUJITSU Thin Client FUTRO S740
Operating Manual
Your FUTRO... 5
Ports and Operating Elements 6
Important notes 11
Getting started 14
Operation 23
System expansions 28
Technical data 50
Index 52

Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and FUTRO are registered trademarks of Fujitsu Limited
or its subsidiaries in the USA and other countries.
Kensington and Microsaver are registered trademarks of ACCO Brands.
USB Type-C™ and USB-C™ are trademarks of the USB Implementers Forum
in the USA and other countries.
Microsoft and Windows are trademarks or registered trademarks of Microsoft
Corporation in the USA and/or other countries.
eLux® and Scout Enterprise Management Suite® are registered trade marks of Unicon Software
Entwicklungs- und Vertriebsgesellschaft mbH in the European Union and in the USA.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.

Contents
Contents
YourFUTRO... ......................................................................... 5
Validityof the Reference Manual ......................................................... 5
Notational conventions .................................................................. 5
Ports and Operating Elements ......................................................... 6
Frontview .............................................................................. 6
Rearview .............................................................................. 7
Securityfunctions ....................................................................... 8
Property and data protection ......................................................... 8
SecurityLock device ................................................................ 8
Securing USB covers (optional) . . . ................................................... 9
Importantnotes ........................................................................ 11
Safetynotes ............................................................................ 11
Important notes on preparing your FUTRO S740 for use via the Power-over-Ethernet
module ................................................................................. 12
Transportingthedevice .................................................................. 12
Cleaning thedevice ..................................................................... 12
Energy saving,disposaland recycling .................................................... 13
Getting started ......................................................................... 14
Setting up the device .................................................................... 14
Vertical operatingposition ............................................................ 15
Horizontal operatingposition ......................................................... 17
Connecting externaldevices ............................................................. 19
Ports on the device .................................................................. 19
Connecting a monitor ................................................................ 19
Connecting a USBmouse ............................................................ 20
Connecting a USB keyboard . . ....................................................... 20
Connect external devices to the serial port (optional) . . . . . . ............................. 20
Connecting externaldevicesto theUSBports ......................................... 21
Connect microphone and headphones . . . . ............................................ 21
Connectingthe deviceto thenetwork (LAN) ............................................... 21
Connecting the mains adapter ........................................................... 22
Operation .............................................................................. 23
Switchthe deviceon .................................................................... 23
Operating systems and management (device-dependent) . . . . . ............................. 23
eLux® . ............................................................................. 23
Windows® 10IoTEnterprise ......................................................... 24
Scout Enterprise Management Suite® – The management solution for Thin Clients . ...... 25
Switching offthedevice ................................................................. 26
Activatingpower-savingmode ........................................................ 26
Open BIOSSetup ....................................................................... 26
PXE system boot . ...................................................................... 26
BIOSUpdate ........................................................................... 27
Makingsystemsettings .............................................................. 27
Executing a system update . . . ....................................................... 27
Systemexpansions .................................................................... 28
Information about boards . . . . . ........................................................... 29
Openingthe casing ..................................................................... 30
Fujitsu 3

Contents
Addingmemory ......................................................................... 33
Removing memory modules . . ........................................................ 33
Installinga memorymodule .......................................................... 33
Install and remove loudspeaker . . ........................................................ 34
Installingthe loudspeaker ............................................................ 34
Removing theloudspeaker ........................................................... 37
Installand removeUSBport ............................................................. 39
InstallUSB port ..................................................................... 39
Remove USBport ................................................................... 40
Installing and removing a Power over Ethernet module (optional) . .......................... 41
Installing the Power over Ethernet module ............................................. 41
Removing the Power over Ethernet module . . . ......................................... 43
Installand removeserial port ............................................................ 45
Installserial port .................................................................... 45
Remove serialport .................................................................. 47
Replacing thelithium battery ............................................................. 48
Closingthe casing ...................................................................... 49
Technicaldata ........................................................................ 50
FUJITSU ThinClientFUTRO S540/S740 ................................................ 50
ACadapter ............................................................................. 51
Index .................................................................................. 52
4Fujitsu

Your FUTRO...
Your FUTRO...
... is a universal network client. The intelligent and flexible terminal is reliable and
easy to maintain, it does not need a fan nor a hard disk. It therefore runs very quietly.
The operating system is installed on a flash memory.
ValidityoftheReferenceManual
This Reference Manual is valid for the following system:
• FUJITSU Thin Client FUTRO S540
• FUJITSU Thin Client FUTRO S740
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123)oracommandusedto
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This fontindicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
•cross
-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
Fujitsu 5

Ports and Operating Elements
Ports and Operating Elements
Ports
This chapter presents the individual hardware components of your device. This will provide
you with an overview of the ports and operating elements on the device. Please familiarise
yourself with these components before you start to work with the device.
Front view
OnswitchOffswitchHeadphoneportMicrophonejackUSB,
1
2
3
4
1 = ON/OFF switch
2 = USB 3.1 Gen1 ports (USB Type-A)
3 = Headphone port
4 = Microphone jack
6Fujitsu

Ports and Operating Elements
Rear view
LANsocketMonitorportUSBportspowersupplyDCinputco nnectorSecurityLockSecurityLockdeviceUSBSerialportDisplayport
1
2
3
9
6
7
8
5
4
1 = Serial port (optional only for FUTRO S740)
2 = Device without Power-over-Ethernet
module: USB 3.1 Gen1 port (USB Type-C,
optional) with double screw security
Device with Power-over-Ethernet
module: No port
3 = USB 2.0 ports (USB Type-A)
4 = Security Lock fixture (positioned
at the side)
5 = USB 2.0 ports (USB Type-A)
6 = RJ45 socket (Local Area Network)
7 = Audio output (Line out)
8 = DisplayPort
9 = DC input jack (DC IN)
Fujitsu 7

Ports and Operating Elements
Security functions
Property and data protection
Propertyprotectio nDataprotectionPro tection,p roper tyand dat a
Software functions and mechanical locking offer a broad range of functions for protecting your
device and your personal data from unauthorised access. You can also combine these functions.
Security Lock device
You can use the security lock device (positioned at the side) and the Kensington Lock cable (steel
cable, accessory) to protect your device against theft. Please consult the manual for your security lock.
When using the Security Lock device, opening of the casing is also prevented.
8Fujitsu

Ports and Operating Elements
Securing USB covers (optional)
To prevent use of the USB ports, you can attach optional USB covers to the USB
ports on the front and rear side of the device.
Please note that USB covers, once fitted, cannot be removed again!
Ensure that you fit the USB covers the right way round.
►Insert the USB covers in the USB ports on the front of the device and push the USB covers in firmly.
Fujitsu 9

Ports and Operating Elements
►Insert the USB covers in the USB ports on the rear side of the device
and push the USB covers in firmly.
In the BIOS Setup, under Advanced - USB Port Security, you can also deactivate
the USB ports, in order to limit the use of USB devices.
10 Fujitsu

Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety notes
SafetynotesNote
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
When installing and operating the device, please observe the notes on ambient
conditions in "Technical data ", Page 50 and the instructions in "Getting started", Page 14.
Replace the lithium battery on the mainboard exactly in accordance with the
instructions in the "Replacing the lithium battery", Page 48 chapter.
Caution, components in the system can get very hot.
The activities described in these instructions must always be
performed with the greatest care.
Repairs to the device must only be carried out by qualified technicians. Incorrect
repairs could put the user at great risk (electric shock, hazardous energy emissions,
risk of fire)orcau
se serious damage to the equipment.
Operate the device only with the casing closed.
Power cable and mains adapter:
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
The mains adapter’s power cable should only be connected to a mains
socket if the device is connected.
Do not use the mains adapter for other devices.
Use only the mains adapter which is intended for use with the device,
see chapter "Technical data ", Page 50.
Make sure that the rated current of the mains adapter is not higher than that of
the power system to which you connect the mains adapter.
ON/OFF switches do not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the power socket.
Fujitsu 11

Important notes
Important notes on preparing your FUTRO S740 for
use via the Power-over-Ethernet module
With the help of the Power-over-Ethernet module, you can operate the FUTRO S540/S740 over the
LAN without any additional power supply. You will need a suitable network infrastructure for this.
To operate the FUTRO S540/S740 via the Power-over-Ethernet module, you need end or
midspan devices according to IEEE 802.3at and shielded CAT-5 network cables or higher quality
cables with a larger cable cross-section (AWG23 or smaller) and a maximum length of 75 m.
End-span devices will only be supported in connection with a hardware classification.
Due to the limited power output, not all hardware configuration levels are possible for
operating the FUTRO S740 via the Power-over-Ethernet module. Thus, the use of
the Type-C USB port (S26361-F3465-E9) USB port is not permitted. If you have any
questions, please contact our support or sales outlet.
Depending on the system utilisation, occupancy of external interfaces (excluding the keyboard,
screen, microphone and headset) may cause overloading of the Power-over-Ethernet
module. In case of overheating or overload, the system can be shut down automatically
to prevent damage to the device or the network. In the event of switching off, the
assignment of the external interfaces must be checked or reduced.
If the system does not receive the required power according to standard 802.3 at (25.5 W), the
system stops in the post with an error message. In this case, check your midspan or end-span device.
Transporting the device
Device,Trans portati on Retransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Cleaning the device
Device,Trans portati onRetransportationSystemunit, see Devi ce
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
12 Fujitsu

Important notes
Energy saving, disposal and recycling
DisposalEnergysavingRecycling
You can find information on these subjects in the "Environment and Energy Information" manual
or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").
Information on "Ecodesign directive":
Regulation 1275/2008, based on the EU Eco-design Directive (2009/125/EU),
defines requirements for the power consumption of electrical and electronic domestic
and office devices in stand-by and off mode.
In general, all FUTRO thin client products have been developed for energy-efficient operation and low
stand-by losses. Customer-specific requirements and requirements of the operating system, which
are a priority for optimal operation, can contradict the requirements of the above-mentioned regulation.
For administrative purposes, such as remote maintenance of systems, the "Wake-on-LAN" (WoL)
function is indispensable for our customers and is therefore a default setting. When the WoL
functions are active, the maximum permissible power draw can be exceeded slightly in OFF
mode. By deactivating the WoL function, it is possible to comply with the legal requirements.
Please see chapter "Activating power-saving mode", Page 26 for the procedure.
The energy saving mode (ACPI S4 Save-to-disk), which is familiar from many current mobile
and desktop systems, is not available in the embedded operating systems for technical reasons.
Therefore, it is not possible to switch devices with this operating system automatically into Off mode.
The operating system of a thin client is stored on a flash memory with optimised size and is provided
with write protection after configuration has been completed by the customer. This prevents data
security from being put at risk through frequent writing to a flash memory, such as when updating
the swapfiles in the operating system or through other applications. Every flash memory permits
only a limited number of write cycles. Both the activated write protection and the available limited
flash memory capacity rule out the possibility of activating energy saving mode (ACPI S4).
Fujitsu 13

Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 11 chapter.
Setting up the device
In order to ensure that the casing is sufficiently ventilated and to prevent overheating,
the device must only be operated with the base foot attached.
If the device is to be built-in, adequate ventilation must be assured.
Fit the base feet for horizontal or vertical operation (see "Vertical operating
position", Page 15 and "Horizontal operating position", Page 17).
14 Fujitsu

Getting started
Vertical operating position
VerticaloperatingpositionOperatingposition, verticalBasefeetSideco ver
If you wish to operate the device in the vertical operating position, use
the two feet supplied for vertical operation.
Only mount the feet on the device side shown in the diagrams.
If connecting many cables to the device, ensure that the device is in a stable
position, in order to prevent it from toppling over.
Proceed as follows to prepare the device for the vertical operating position:
►Disconnect the cables if required.
►Laythedeviceonitstop(
narrow side) as shown, on a stable, flat and clean surface.
1
3
3
3
3
1
2
►Place the feet on the casing (1). In doing so, make sure that the 4 clips (2) on the
feet are aligned above the corresponding holes in the casing.
►To secure the feet, press the clips in the direction of the arrow (2) until
they are felt to engage in the holes.
Fujitsu 15

Getting started
To protect your device against unauthorised removal of the feet, the feet
can also be secured with two screws each, of type M2.5x5 mm. These
are not included in the delivery scope.
►Secure the feet with the screws (3).
►Stand the device on the feet.
►If necessary, reconnect any cables that were previously disconnected.
16 Fujitsu