Fujitsu ETERNUS LT40 S2 How to use

FUJITSU Storage
ETERNUS LT40 S2/LT60 S2 LTO Library
Installing, Starting Up and Maintaining
P3AM-5392-07ENZ0

This page is intentionally left blank.

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
3
Preface
This manual briefly explains the operations that need to be performed by the user in order to use the
ETERNUS LT40 S2/LT60 S2 LTO Library.
Seventh Edition
April 2018
Target Groups
This manual is written primarily for users with access to the entire range of the ETERNUS LT40 S2/LT60 S2 LTO
library functions, for system administrators and field engineering staff. Basic hardware knowledge is required.
Notational Conventions
The following notational conventions are used in this manual.
italics Denote names of commands, system calls, functions, files,
procedures, programs etc. as well as menu options and
input/output fields from figures in the main body of text.
fixed-pitch font Indicates system output, such as error messages, messages,
notes, file excerpts and program examples.
fixed-pitch semi-bold font Denotes user input in examples.
1., 2., 3. ... Activities of the user.
Highlights additional information that should be noted to
assist understanding of the surrounding text passages.
CAUTION
Calls attention to a situation that can cause data loss.
WARNING
Calls attention to a situation that is potentially lethal or
hazardous to people.
CAUTION
A discharge of static electricity can damage static-sensitive
devices or micro circuitry. Proper packaging and grounding
techniques are necessary precautions to prevent damage.

Preface
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
4
Warnings
•Ventilation
The product should be situated so that its location or position does not interfere with proper ventilation.
•Heat
The product should be situated away from heat sources such as radiators, heat registers, furnaces, or other
heat producing appliances.
•Power sources
The product should be connected to a power source only of the type directed in the operating instructions
or as marked on the product.
•Power cord protection
The AC line cord should be routed so that it is not likely to be walked on or pinched by items placed upon or
against it, paying particular attention to the cord at the wall receptacle, and the point where the cord exits
from the product.
•Object and liquid entry
Care should be taken to insure that objects do not fall and liquids are not spilled into the product’s
enclosure through openings.
Precautions
•Do not expose the unit to moisture. The operating temperature for this unit is between 10 C (50F) and
35 C (95 F).
•Use the unit on a firm level surface free from vibration.
•Do not place anything on top of the unit.
Product Warranty Caution
The warranty for the tape library shall not apply to failures of any unit when:
•The tape library is physically abused or used in a manner that is inconsistent with the operating
instructions or product specification defined by the manufacturer.
•The tape library fails because of accident, misuse, abuse, neglect, mishandling, misapplication, alteration,
faulty installation, modification, or service by anyone other than the factory service center or its approved
agent.
•The tape library is repaired by anyone, including an approved agent, in a manner that is contrary to the
maintenance or installation instructions supplied by the manufacturer.
•The manufacturer's serial number tag is removed.
•The tape library is damaged because of improper packaging on return.
•Unauthorized modifications to the unit configuration by the customer may result in loss of guarantee by
the vendor.

Preface
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
5
Rack Stability
WARNING
To reduce the risk of personal injury or damage to equipment:
•Extend levelling jacks to the floor.
•Ensure that the full weight of the rack rests on the levelling jacks.
•Install stabilizing feet on the rack.
•In multiple-rack installations, secure racks together.
•Extend only one rack component at a time. Racks may become unstable if more
than one component is extended.

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
6
Table of Contents
Chapter 1 Product Description and Features 12
1.1 Front Panel ....................................................................................................................... 13
1.2 Rear Panel ........................................................................................................................ 15
1.3 Inside Components ...........................................................................................................19
Chapter 2 Installing the Tape Library 20
2.1 Location Requirements ..................................................................................................... 20
2.2 Unpacking the Tape Library .............................................................................................. 21
2.3 Identifying Product Components ....................................................................................... 24
2.4 Removing the Shipping Lock ............................................................................................. 24
2.5 Rack Mounting the Library ................................................................................................ 26
2.5.1 Preparing .......................................................................................................................................................26
2.5.2 Installing the Library in a Rack ...................................................................................................................... 27
2.6 Connecting ........................................................................................................................ 32
2.6.1 Connection Recommendations and Additional Remarks ...............................................................................32
2.6.2 Power and Signal Cable ................................................................................................................................. 33
2.6.3 Verifying the Detection of the Library Under Windows .................................................................................. 35
Chapter 3 Operating the Tape Library 36
3.1 Operator Control Panel (OCP) ............................................................................................ 36
3.1.1 OCP Philosophy ..............................................................................................................................................36
3.1.2 Power-Up Display ..........................................................................................................................................37
3.1.3 Note about the LEDs ...................................................................................................................................... 37
3.1.4 Input Modes .................................................................................................................................................. 37
3.1.5 Power ON/OFF ................................................................................................................................................ 38
3.1.6 OCP Menu Flow Charts ...................................................................................................................................39
3.2 Partitioning the Library ..................................................................................................... 40
3.2.1 ETERNUS LT40 S2 ...........................................................................................................................................40
3.2.2 ETERNUS LT60 S2 ...........................................................................................................................................41
3.3 Tape Cartridges ................................................................................................................. 44
3.3.1 ETERNUS LT40 S2/LT60 S2 LTO Library Tape Library Cartridge Type ................................................................44
3.3.2 Using and Maintaining Tape Cartridges .........................................................................................................45

Table of Contents
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
7
3.3.3 Labeling Tape Cartridges ...............................................................................................................................45
3.3.4 Write-protecting Tape Cartridges ...................................................................................................................46
3.3.5 Backward Read Compatibility ........................................................................................................................ 47
3.3.6 Barcode Reader .............................................................................................................................................47
3.3.7 Activating the Autoclean Function ................................................................................................................. 47
3.4 Magazines ........................................................................................................................ 48
3.4.1 Inserting Tape Cartridges Into a Magazine ....................................................................................................48
3.4.2 Mailslot ......................................................................................................................................................... 50
3.5 Remote Management Unit (RMU) .................................................................................... 50
3.5.1 Overview ........................................................................................................................................................50
3.5.2 Library Status Icons ........................................................................................................................................ 50
3.5.3 Login .............................................................................................................................................................51
3.5.4 Identity .......................................................................................................................................................... 51
3.5.5 Status ............................................................................................................................................................53
3.5.6 Configuration .................................................................................................................................................55
3.5.7 Operations .....................................................................................................................................................66
3.5.8 Service ...........................................................................................................................................................67
Chapter 4 Troubleshooting 72
4.1 Installation Problems ........................................................................................................ 72
4.1.1 LUN Scanning ................................................................................................................................................ 72
4.1.2 Backup Application Installation .....................................................................................................................72
4.1.3 Device Driver Installation ............................................................................................................................... 72
4.2 Troubleshooting Table ...................................................................................................... 73
4.3 Removing Stuck Tapes From Slots ..................................................................................... 76
4.4 Magazine Does not Unlock via OCP or RMU ....................................................................... 77
4.5 Media Removal Prevented ................................................................................................ 79
4.6 Tape Library Error Codes ................................................................................................... 80
4.6.1 Example Error Code .......................................................................................................................................80
4.6.2 Error Code Table ............................................................................................................................................81
Chapter 5 Servicing the Tape Library 85
5.1 Possible Tools Needed ...................................................................................................... 85
5.2 Electrostatic Discharge ...................................................................................................... 85
5.3 Removing and Replacing a Tape Drive .............................................................................. 86
5.4 Removing and Replacing the Library Controller ................................................................ 88
5.5 Removing and Replacing a Power Supply ......................................................................... 90

Table of Contents
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
8
5.6 Replacing a Redundant Power Supply ............................................................................... 91
5.7 Removing and Replacing a Magazine Using the OCP ........................................................ 92
5.8 Removing and Replacing a Magazine Using the RMU ....................................................... 93
5.9 Removing and Replacing the Base Chassis ....................................................................... 94
5.10 Adding a New License Key ................................................................................................ 95
5.10.1 Sequence of Installation ................................................................................................................................ 96
5.10.2 Add a License Key via OCP .............................................................................................................................96
5.10.3 Add the License Key via RMU ......................................................................................................................... 99
5.11 How to Get the Serial No. in Storage Systems ................................................................. 101
Chapter 6 Technical Specifications 103
Chapter 7 Packaging Before Transportation 104
Chapter 8 Recycling and Disposal 106
Chapter 9 Regulatory Information 107
9.1 Device Standards ............................................................................................................107
9.2 FCC (United States) .........................................................................................................108
9.3 Canadian Verification ...................................................................................................... 108
9.4 CE Notice ......................................................................................................................... 108

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
9
List of Figures
Figure 1.1 ETERNUS LT60 S2 front and rear view .......................................................................................................... 12
Figure 1.2 Front panel ETERNUS LT60 S2...................................................................................................................... 14
Figure 1.3 ETERNUS LT40 S2 rear panel........................................................................................................................ 15
Figure 1.4 ETERNUS LT60 S2 rear panel........................................................................................................................ 15
Figure 1.5 SAS tape drive (LTO Ultrium 5) .................................................................................................................... 16
Figure 1.6 FC tape drive (LTO Ultrium 6 with Ethernet port)......................................................................................... 17
Figure 1.7 FC tape drive (LTO Ultrium 6, 7, 8) .............................................................................................................. 17
Figure 1.8 SAS tape drive (LTO Ultrium 6, 7, 8) ............................................................................................................ 18
Figure 1.9 Inside components...................................................................................................................................... 19
Figure 2.1 Unpacking the library (ETERNUS LT40 S2) ................................................................................................... 22
Figure 2.2 Unpacking the library (ETERNUS LT60 S2) ................................................................................................... 23
Figure 2.3 Instructions for shipping lock ...................................................................................................................... 24
Figure 2.4 Shipping lock and label ............................................................................................................................... 25
Figure 2.5 Shipping lock and label on the rear panel................................................................................................... 25
Figure 2.6 3 different rackmount rails.......................................................................................................................... 27
Figure 2.7 Mounted support bracket ............................................................................................................................ 28
Figure 2.8 Mounting cage nuts at the front of the rack (PRIMECENTER rackmount rail)............................................... 28
Figure 2.9 Setting in the right rail at the front ............................................................................................................. 29
Figure 2.10 Screwing on the right rail at the front ......................................................................................................... 29
Figure 2.11 Mounted right sliding rail (rear side) .......................................................................................................... 30
Figure 2.12 Mounted left sliding rail (rear side)............................................................................................................. 30
Figure 2.13 Remove the flange cover............................................................................................................................. 31
Figure 2.14 Screwing on the library................................................................................................................................ 31
Figure 2.15 Attaching the power cable .......................................................................................................................... 34
Figure 3.1 Home screen of the ETERNUS LT60 S2 ......................................................................................................... 37
Figure 3.2 Menu tree overview..................................................................................................................................... 39
Figure 3.3 Ultrium tape cartridge and proper barcode label placement ....................................................................... 46
Figure 3.4 Write-protecting the Ultrium data cartridge ................................................................................................ 46
Figure 3.5 Slot numbering left magazine with mailslot ............................................................................................... 48
Figure 3.6 ETERNUS LT40 S2: Slot numbering right magazine...................................................................................... 49
Figure 3.7 ETERNUS LT60 S2: Slot numbering right magazine...................................................................................... 49
Figure 3.8 RMU login page........................................................................................................................................... 51
Figure 3.9 ETERNUS LT40 S2: Identity, Library page ..................................................................................................... 52
Figure 3.10 ETERNUS LT40 S2: Identity, Drive page........................................................................................................ 52
Figure 3.11 ETERNUS LT40 S2: Identity, Network page................................................................................................... 53
Figure 3.12 ETERNUS LT60 S2: Status, Library page........................................................................................................ 54
Figure 3.13 ETERNUS LT60 S2: Status, Drive page .......................................................................................................... 54
Figure 3.14 ETERNUS LT40 S2: Status, Inventory page.................................................................................................... 55
Figure 3.15 ETERNUS LT40 S2: Configuration, System page............................................................................................ 56
Figure 3.16 ETERNUS LT60 S2: Adding license keys ........................................................................................................ 56
Figure 3.17 ETERNUS LT40 S2: Configuration, Drive page............................................................................................... 57
Figure 3.18 ETERNUS LT40 S2: Configuration, Network page.......................................................................................... 58
Figure 3.19 Certificate generation.................................................................................................................................. 58
Figure 3.20 Certificate information ................................................................................................................................ 59
Figure 3.21 Certificate import wizard: Welcome ............................................................................................................. 59
Figure 3.22 Certificate import wizard: Storage ............................................................................................................... 60
Figure 3.23 Certificate import wizard: Finishing (1) ....................................................................................................... 60
Figure 3.24 Certificate import wizard: Finishing (2) ....................................................................................................... 60

List of Figures
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
10
Figure 3.25 Termination of certificate installation ......................................................................................................... 61
Figure 3.26 Unchecking the warnings box ..................................................................................................................... 61
Figure 3.27 ETERNUS LT40 S2: Configuration, SNMP page.............................................................................................. 62
Figure 3.28 ETERNUS LT40 S2: Configuration, User page................................................................................................ 63
Figure 3.29 ETERNUS LT40 S2: Configuration, Date/Time page....................................................................................... 64
Figure 3.30 ETERNUS LT40 S2: Configuration, Log page ................................................................................................. 64
Figure 3.31 ETERNUS LT40 S2: Configuration, Event notification page........................................................................... 65
Figure 3.32 ETERNUS LT40 S2: Configuration, Restore defaults page ............................................................................. 65
Figure 3.33 ETERNUS LT40 S2: Operations, Move Media page........................................................................................ 66
Figure 3.34 ETERNUS LT40 S2: Operations, Inventory page ............................................................................................ 66
Figure 3.35 ETERNUS LT40 S2: Operations, Magazines page .......................................................................................... 67
Figure 3.36 ETERNUS LT40 S2: Service, General Diagnostic page.................................................................................... 67
Figure 3.37 ETERNUS LT40 S2: Service, Drive Diagnostic page........................................................................................ 68
Figure 3.38 ETERNUS LT40 S2: Service, Firmware page .................................................................................................. 68
Figure 3.39 ETERNUS LT40 S2: Service, Reboot page ...................................................................................................... 69
Figure 3.40 ETERNUS LT40 S2: Service, Library Logs page .............................................................................................. 70
Figure 3.41 ETERNUS LT40 S2: Service, Clean Drive page ............................................................................................... 70
Figure 3.42 ETERNUS LT40 S2: Service, Cartridge Memory.............................................................................................. 71
Figure 4.1 Removing stuck tapes from slot .................................................................................................................. 76
Figure 4.2 Access holes for the left and right magazine ............................................................................................... 77
Figure 4.3 Remove the left magazine .......................................................................................................................... 78
Figure 4.4 Media Removal information in the Library Status page (LT60 S2 example: Allowed).................................. 79
Figure 4.5 Media Removal information in the Drive Status page (LT60 S2 example: Allowed) .................................... 79
Figure 5.1 Drive sled components of rear panel ........................................................................................................... 86
Figure 5.2 Tape drive removal...................................................................................................................................... 87
Figure 5.3 Installing a tape drive ................................................................................................................................. 87
Figure 5.4 Position of the two thumbscrews ................................................................................................................ 88
Figure 5.5 Library controller removal ........................................................................................................................... 89
Figure 5.6 Position of the three thumbscrews.............................................................................................................. 90
Figure 5.7 Power supply removal ................................................................................................................................. 90
Figure 5.8 Replacing a redundant power supply .......................................................................................................... 91
Figure 5.9 RMU login page........................................................................................................................................... 93
Figure 5.10 ETERNUS LT40 S2: Operations, Magazine page............................................................................................ 94
Figure 5.11 Control keys on the front panel ................................................................................................................... 96
Figure 5.12 Menu item Configuration ............................................................................................................................ 97
Figure 5.13 Menu item Add License Key ........................................................................................................................ 97
Figure 5.14 License key.................................................................................................................................................. 98
Figure 5.15 RMU login page........................................................................................................................................... 99
Figure 5.16 RMU: Configuration ..................................................................................................................................... 99
Figure 5.17 Confirmation of license key ....................................................................................................................... 100
Figure 5.18 Request for reboot..................................................................................................................................... 100
Figure 5.19 Flap with serial number............................................................................................................................. 101
Figure 5.20 Serial number via RMU.............................................................................................................................. 102
Figure 7.1 Replacing shipping lock before transportation.......................................................................................... 104
Figure 7.2 Product label ............................................................................................................................................. 105
Figure 7.3 Re-Packaging the library ........................................................................................................................... 105
Figure 8.1 WEEE symbol............................................................................................................................................. 106

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
11
List of Tables
Table 1.1 Front panel overview................................................................................................................................... 14
Table 1.2 Inside components...................................................................................................................................... 19
Table 2.1 Location criteria .......................................................................................................................................... 20
Table 3.1 Write protecting .......................................................................................................................................... 47
Table 3.2 Slot numbering, left magazine.................................................................................................................... 48
Table 3.3 Slot numbering, right magazine.................................................................................................................. 49
Table 3.4 Status icons ................................................................................................................................................. 50
Table 4.1 Troubleshooting table ................................................................................................................................. 73
Table 4.2 Access to manually release a magazine ...................................................................................................... 77
Table 4.3 Removing the left magazine ....................................................................................................................... 78
Table 4.4 Error codes .................................................................................................................................................. 81
Table 5.1 Description for Figure 5.1 ............................................................................................................................ 86
Table 7.1 Re-Packaging description.......................................................................................................................... 105
Table 9.1 IEC 60297 rack standards .......................................................................................................................... 107

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
12
Chapter 1
Product Description and Features
The ETERNUS LT40 S2/LT60 S2 LTO Library tape library provides a compact, high-capacity, low-cost solution for
simple, unattended data backup.
The ETERNUS LT40 S2 houses up to 24 tape cartridges in a compact 2U form factor with easy access to tape
cartridges via two removable magazines and a mailslot for importing and exporting cartridges. The library is
equipped with one or two half height LTO6, LTO7, or LTO8 tape drives or one full height tape drive.
The ETERNUS LT60 S2 houses up to 48 in a compact 4U form factor with easy access to tape cartridges via four
removable magazines and a mailslot for importing and exporting cartridges. The library is equipped with up
to four half height LTO6, LTO7, or LTO8 tape drives or up to two full height tape drives.
Each magazine can hold up to twelve cartridges.
The library does not occupy an own signal interface but is controlled via a separate LUN of one of the tape
drives.
The library can be operated via Operator Control Panel (OCP) or Remote Management Unit (RMU).
The ETERNUS LT40 S2/LT60 S2 LTO Library is compatible with most operating systems and environments that
support the SAS and Fibre Channel (FC) interface. However, the library requires either direct support from the
operating system or a compatible backup application to take full advantage of its many features.
Figure 1.1 ETERNUS LT60 S2 front and rear view

Chapter 1 Product Description and Features
1.1 Front Panel
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
13
■Particular emphasis of the ETERNUS LT family includes
•Platform of tape Libraries
independent of LTO technology
•Broad level of connectivity
-SAS
-FC
•Expandability
magazines and drives can be added in the field
•Technology upgrade
customer can upgrade tape drive technologies (e. g. LTO6 to LTO7) in the field
•Service friendly design
drive, power supply and library controller are accessible from the back of the unit allowing for quick
replacement
•Best in class cartridge and drive density
packing in as many or more cartridges in the standard rack height 4U as most other Libraries on the
market
•Maximum up time
through advanced error handling and recovery capability
■The ETERNUS LT40 S2/LT60 S2 LTO Library includes the following features
•USB interface to improve serviceability and to store customer specific settings
•User friendly Operator Control Panel with simple character set
•Support of further LTO generations
•Integral Remote Management Unit
•Supports industry standard management software tools such as SNMP and SMI-S (future developments)
•Mailslot
•Robotic with barcode reader
•LTFS function (optional)
The ETERNUS LT40 S2/LT60 S2 LTO Library provides cost-effective, easy to install, automated data protection
for the small to medium sized business.
1.1 Front Panel
The front panel of the ETERNUS LT40 S2/LT60 S2 LTO Library does access to the power button, operator control
panel (OCP), magazines, LED's, and the mailslot.
The Operator panel consists of an LCD display with a 128 x 64 character matrix, 4 push button switches and a
power on/off button.
Not all features will be available at initial product launch and will be added upon technology availability,
anticipated market requirements, and/or customer needs.

Chapter 1 Product Description and Features
1.1 Front Panel
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
14
Figure 1.2 Front panel ETERNUS LT60 S2
Table 1.1 Front panel overview
No. Description
1Leftmagazine
2Power button.
Pressing the button will initiate a controlled Power Down of the unit(soft power down).
3LED "READY" (Green).
Illuminated when power is on. Blinking when there is tape or library robots activity.
4
LED "CLEAN" (Amber).
Illuminated when the tape drive has determined that a cleaning cartridge should be used. Cleaning is only
necessary when the library directs you to do so. Additional cleaning is not necessary.
5LED "ATTENTION" (Amber).
Illuminated if the library has detected a condition that requires attention by the operator.
6
LED "ERROR" (Amber).
Illuminated if an unrecoverable tape drive or library error occurs. A corresponding error message displays on the
LCD screen (see for more information).
7Control key "CANCEL" button [X].
The CANCEL button is used to cancel a user action and return to the last menu item.
8Control key "DOWN" button [▼]
The PREVIOUS button is used to navigate through menu items.
9Rightmagazines
10 Air vents.
11 Control key "ENTER" button [].
The ENTER button to go to a sub menu or execute an action.
12 Control key "UP" button [▲]
The NEXT button is used to navigate through menu items.
13
Front panel "OCP" display, consisting of 128 x 64 characters.
The OCP screen displays actions and status information, menu items or error messages equivalent to the
operation mode.
14 Left magazine with Mailslot.

Chapter 1 Product Description and Features
1.2 Rear Panel
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
15
1.2 Rear Panel
The rear panel of the tape Library provides access to SAS or FC connectors, tape drive bays, the power
connector, Ethernet, serial and the USB port.
Figure 1.3 ETERNUS LT40 S2 rear panel
Figure 1.4 ETERNUS LT60 S2 rear panel
No. Description
1Power connector
The library requires a 110/220 volt AC power connection
2 Shipping lock (storage location)
3Fanvent
4 Tape drive sled
5 Ethernet port
6Serialport

Chapter 1 Product Description and Features
1.2 Rear Panel
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
16
Figure 1.5 SAS tape drive (LTO Ultrium 5)
7 Controller LED
8USBport(Host)
9 Product label foil (see "Chapter 7 Packaging Before Transportation" (page 104))
10
Power Supply LED’s from top:
blue LED on >> AC connected
green LED on >> Power good
yellow LED on >> degraded Fan
11 Tape drive sled
12 Tape drive sled
13 Tape drive sled
No. Description
1Fanvent
2 Ethernet port
3 SAS connector
4TapedriveLED
No. Description

Chapter 1 Product Description and Features
1.2 Rear Panel
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
17
Figure 1.6 FC tape drive (LTO Ultrium 6 with Ethernet port)
Figure 1.7 FC tape drive (LTO Ultrium 6, 7, 8)
No. Description
1Fanvent
2 Ethernet port (unavailable)
3FCconnector(portA)
4 FC connector (port B is unavailable)
5TapedriveLED
No. Description
1Fanvent
2FCconnector(portA)
3 FC connector (port B is unavailable)
4TapedriveLED
2 1 3 4 5

Chapter 1 Product Description and Features
1.2 Rear Panel
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
18
Figure 1.8 SAS tape drive (LTO Ultrium 6, 7, 8)
There are two types of rear panels for the SAS interface.
No. Description
1Fanvent
2 SAS connector (port A)
3 SAS connector (port B is unavailable)
4TapedriveLED
2 13 4

Chapter 1 Product Description and Features
1.3 Inside Components
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
19
1.3 Inside Components
Figure 1.9 Inside components
Table 1.2 Inside components
No. Description
1Leftuppermagazine
2 Robotic with barcode reader
3 Controller
4Powersupply
5Drivesled
6Chassis
7Rightuppermagazine
8Leftlowermagazine
9 Right lower magazine
7
6
5
4
3
2
9
1
8

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
20
Chapter 2
Installing the Tape Library
2.1 Location Requirements
Choose a location that meets the following criteria:
Table 2.1 Location criteria
Criteria Definition
Rack requirements Standard 19-inch rack with 2U 4U of clearance
Room temperature 10-35C(50-95 F)
Power source AC power voltage 100-127 VAC
200-240 VAC
Line frequency 50-60 Hz
Place the library near an AC outlet. The AC power cord is the product's main AC
disconnect device and must be easily accessible at all times.
Weight without media ETERNUS LT40 S2 with two HH drives: 16.5 kg
ETERNUS LT60 S2 with four HH drives: 27 kg
Weight with media ETERNUS LT40 S2 with 24 cartridges: 24.2 kg
ETERNUS LT60 S2 with 48 cartridges: 42.4 kg
Air quality The library should be placed in an area with minimal sources of particulate
contamination.
Avoid areas near frequently used doors and walkways, stacks of supplies that collect
dust, printers, and smoke-filled rooms.
Excessive dust and debris can damage tapes and tape drive.
Humidity 20-80 percent RH non-condensing
Clearance Back Minimum of 15.4 cm (6 inches)
Front Minimum of 30.8 cm (12 inches)-for mailslot
Minimum of 60 cm to remove magazines
Sides Minimum of 5.08 cm (2 inches)