Furinno 11179 User manual

Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Recommended Maximum Weight
Furinno Simple Design Coffee Table
1117920180228
MODEL : 11179
20
*Unit in Pound(lbs)
15
(1)x8pcs
(3)x4pcs
(1)
Install Nail Leg (3) to the bottom of Panel (C)
using hammer, as shown.
STEP 5
Attach Panel (B) to Panel (C) and tighten it
using Screw (1).
STEP 4
Tools Required
Recomm. 1 Person
Approx. 15 minutes
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
unfinished surface

(C)x4pcs
(4)x1pcs
(2)x2pcs
(5)x4pcs
unfinished surface
STEP 1
Insert Dowel (2) and Cam-Lock Nut (4) to Panel (C).
NOTE: Arrow on Cam-Lock Nut (4) should be pointing towards hole.
Shelf Panel
STEP 2
Insert Cam-Lock Screw (5) into pre-drilled
holes on Panel (A).
Attach Panel (C) to Panel (A) and tighten
Cam-Lock Nut (4) using screwdriver.
STEP 3
(5)
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
8pcs
8pcs
4pcs
A 1pc
Top Panel
Nail Leg
No Hardware List Qty No QtyParts List
Chipboard Screw
Dowel
4
5
4pcs
4pcs
Cam-Lock Nut
Cam-Lock Screw
B
C
1pc
4pcs
Leg Panel