Furniture of America Bonneville CM3824PT User manual

1 / 11
MODEL #
CM3824PT
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
VERSION # 21-6-17

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 11

4 / 11

TABLE
5 / 11
CM3824PT
#1 1pc
#A 8pcs
#2 1pc
Bolt Ø5/16" x 1-1/4"
Allen Wrench M5
#H 1pc
#3 1pc
#F 8pcs
#B 8pcs
Bolt Ø5/16" x 2"
#C 8pcs
Bolt Ø1/4" x 7/8"
Table Top
#4 1pc
Left Side Panel Right Side Panel Stretcher
#5 2pcs #6 1pc #7 1pc
Connection Panel
#8 1pc
Drawer Drawer Wine Rack A Drawer Wine Rack B
#D 16pcs
Flat Washer Ø5/16"
#E 16pcs
Lock Washer Ø5/16" Flat Washer Ø1/4" Lock Washer Ø1/4"
Allen Wrench M4
#I 1pc
L Metal Plate
#J 4pcs
Screw #3.5 x 15mm
#K 10pcs
#G 8pcs

6 / 11
CM3824PT is packed in 2 cases
Carton Disignation Part Hardware
CM3824PT-1 Table Top #1
#A x8pcs
#D x16pcs
#E x16pcs
#C x8pcs
#B x8pcs
#F x8pcs
#G x8pcs
Left Side Panel
Right Side Panel
#H x1pc
#I x1pc
#J x10pcs
#K x4pcs
CM3824PT-2
Stretcher
Connection Panel
(2pcs)
Drawer
Drawer Wine Rack A
Drawer Wine Rack B
#2
#3
#4
#5
#6
#7
#8

7 / 11
Exploded View
#2
#3
#6
#1
#4
#5
#5
#7
#8

ASSEMBLY INSTRUCTIONS
8 / 11
1
2
#3 x1pc
Hardware #C x4pcs
Hardware #F x4pcs
Hardware #G x4pcs
#2 x1pc
Part
Part
#4 x1pc
Part
Hardware #J x4pcs
Hardware #C x4pcs
Hardware #F x4pcs
Hardware #G x4pcs
#J
#C
#G #F
#I
#J
#2
#3
#4
#2
#3
#4
#I
#C
#G
#F
#J
Hook stretcher (#4) to the latch of left and
right side panels (#2,3), then align
brackets (#J) to the holes of the stretcher
(#4) and side panels (#2,3). Secure by
using bolts (#C) with washers (#G,F).
Make sure to secure brackets
(#J) on the bottom holes of the
stretchers (#4) and side
panels (#2,3) by using bolts
(#C) with washers (#G,F).

ASSEMBLY INSTRUCTIONS
9 / 11
3
4
Hardware #B x8pcs
Hardware #D x8pcs
Hardware #E x8pcs
#5 x2pcs
Part
Hardware #K x4pcs
#6 x1pc
Part
#2
#3
#5
#5
#H
#B
#E
#D
#6
#2
#3
#4
#K
Align connection panels (#5) to the side
panels (#2,3), then secure by using
bolts (#B) with washers (#E,D).
Align drawer (#6) to the drawer rails. Make sure that the alignment of
drawer (#6) is correctly centered to the side panels (#2,3), because there
will be no pre-drilled holes. Secure drawers rails to the drawer (#6) by
using screws (#K).

10 / 11
ASSEMBLY INSTRUCTIONS
5
Hardware #K x6pcs
4
Hardware #A x8pcs
Hardware #D x8pcs
Hardware #E x8pcs
#2
#3
#6
#K
#2
#3
#1
#6
#H
#A
#E
#D
#1 x1pc
Part
Extend drawer (#6), then secure drawer (#6) to
drawer rails by using screws (#K).
Align connection panels (#5) to the holes
of the table top (#1), then secure by
using bolts (#A) with washers (#E,D).