Furniture of America YNJ-1415-1 User manual

E-commerce-Enitial Lab
YNJ-1415-1
ASSEMBLY RATING
The Assembly Rating is a 5-point
system that shows the degree of effort
needed in assembling a specific
product (with 1 being easy and 5 being
difficult). For most products, two
persons are recommended.
EASY DIFFICULT
Page 1 of 10
Tools Required for Assembly
Phillips Screwdriver
(Not Included)
2 PERSON RECOMMENDED
ASSEMBLY INSTRUCTIONS

Page 2 of 10

PRE-ASSEMBLY INTRODUCTION
Page 3 of 10
Unless you are particularly adept at assembling flat-pack/knock-
down furniture, we understand building ready-to-assemble
furniture can be a frustrating experience for some. To help avoid
confusion and to make the assembly process quicker and
smoother, we have provided some helpful tips. Before you begin
the assembly, please read the following:
1. Due to the size and/or weight on most of the ready-to-assemble
furniture, it is highly recommended that the assembly should be done
near the area of its intended location. Make sure you have enough space
to move around during the assembly. ALWAYS have at least two people
to help with transporting and assembling of the product to avoid any
potential injury and/or damage.
2. To protect from damage, assemble the item on a clean, protective
surface, such as on a carpet or cardboard.
3. Make sure you have taken all the parts and hardware out of their
packaging. Do not throw away packaging material until assembly is
completed.
4. Make sure all parts and hardware are accounted by comparing the actual
parts and hardware to the list provided in the assembly drilled hole. If
there is any problem or missing piece, please contract the manufacturer
or the supplier. By having the model number, part number and a brief
description of the problem ready will help expedite the replacement
process.
5. Read the entire instructions and view the diagrams first before
assembling. Arrange your parts in order of use and group the identical
hardware together will make it easier to grab each piece as you begin to
assemble.
6. During the assembly process, make sure all parts are properly aligned
before tighten with the tool provided or required for the assembly. Do not
use power tools and do not over tighten.
7. When applying glue to the wood dowels to bond the parts together,
please be ABSOLUTELY certain that the parts are correct and line up with
each other(refer to diagrams and take notice of the various pre-drilled
hole locations). When in doubt, assemble the parts together first and if
the parts fit right, then apply glue to the wood dowels.

CAM LOCK FASTENER ASSEMBLY INTRODUCTION
Page 4 of 10

HARDWARELIST
A
143PCS
1PCS
Pleasekeepforfuturereference
MODEL#YNJ-1415-1
PARTSLIST
CONSOLE TABLE
ASSEMBLY INSTRUCTIONS
DIMENSION
47.24''(W) X 15.75''(D) X 34.84''(H)
Before you begin,
Please read “Assembly
and Care Advice” and
“Pre-Assemble
introduction
Page 5 of 10
243PCS 348PCS 44PCS
47.24''
15.75''
34.84''
B2PCS
C1PCS
D1PCS
E1PCS
F1PCS
G1PCS
H1PCS
I1PCS
J2PCS
K1PCS
L1PCS
M1PCS
N1PCS
O1PCS
P1PCS
Q1PCS
R1PCS
S2PCS
T1PCS
U1PCS
52PCS 68PCS 74PCS 81PC

ASSEMBLY INTRODUCTIONS
Page 6 of 10
STEP1
Hardware 1 = 32pcs
Hardware 3 = 8pcs
STEP2
Hardware 1 = 8pcs
Hardware 3 = 20pcs
1
O
EG
A
F
H
3
1
J
C
D
T
B
3
X2

ASSEMBLY INTRODUCTIONS
Page 7 of 10
N
I
K
3
STEP1
Hardware 3 = 16pcs
STEP2
Hardware 1 = 3pcs
Hardware 3 = 6pcs
Hardware 5 = 2pcs
Hardware 6 = 8pcs
M
Q
P
L
R
T
5
6

ASSEMBLY INTRODUCTIONS
Page 8 of 10
STEP5
Hardware 2 = 7pcs
Hardware 4 = 4pcs
STEP5
Hardware 2 = 14pcs
K
T
N
2
4
O
P
S
S
R
C
E
H
D
F
G
L
M
J
J
I
2
2

STEP:5~6
6
4/6
ASSEMBLY INTRODUCTIONS
Page 9 of 10
STEP6
Hardware 2 = 12pcs
Hardware 7 = 4pcs
STEP7
Hardware 2 = 4pcs
D
C
T
I
K
2
7
O
2
B
B