Furniture of America Calliope CM7751CK User manual

1 / 9
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
3 - People
EASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
DIFFICULT
MODEL #
CM7751CK
VERSION # 20-09-21

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXXX9

BED
CM7751CK
5 / 9
#2 2pcs
Headboard
#1 1pc
Headboard Leg(L&R)
#3 1pc #4 1pc
Footboard
Footboard Leg(L&R)
#5 2pcs #7 8pcs #8 4pcs
Slat support leg Slat
(Ø1/4")
Headboard Bottom Rail
#A 16pcs #B 20pcs
Bolt Ø1/4" x 1-3/4" Lock Washer Ø1/4"
#C 20pcs
Bolt Ø1/4" x 2"
#G 12pcs
#E 8pcs
Side rail
#6 2pcs
Bolt Ø5/16" x 1"
HARDWARE
Flat Washer Ø1/4"
#D
3
pcs
#F 4pcs
Allen Wrench M4
Screw M4 x 30mm

#1
#2R
#2L #3 #4
#6
#7
#8
#6
#5L
#5R
6 / 9
CM7751CK is packed in 3 cases
Carton Disignation Part Hardware
CM7751CK-FB
CM7751CK-HB
#3
#4
#5
#7
#1
#2
#B x 4pcs
#C x 4pcs
Headboard
Headboard Leg(L&R)
Headboard Bottom Rail
Footboard
Footboard Leg(L&R)
#8
#6
Slat support leg
Slat
CM7751CK-R Side rail
#A x 16pcs
#B x 16pcs
#C x 16pcs
#G x 12pcs
#D x 1pc
#
Dx 1pc
#
D x 1pc
#
Ex 8pcs
#
Fx 4pcs

ASSEMBLY INSTRUCTIONS
7 / 9
Part #1 x1pc
Part #2 x2pcs
Hardware #A x12 pcs
Hardware #B x12 pcs
Hardware #C x12 pcs
#A #B #C
#D
#1
#2L
#2R
Part #3 x1pc
Hardware #A x4 pcs
Hardware #B x4 pcs
Hardware #C x4 pcs
#1
#2L
#2R
#3
#A
#B
#C
#D
1
2
Prepare 12 bolts assembly by inserting lock
washer (#B), then flat washer (#C) onto bolts
(#A). Align HB legs (#2R/L) to the holes of the
headboard (#1). Secure by using bolts (#A).
Prepare 4 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts
(#A). Align headboard support (#3) to the holes of the headboard legs (#2R/L), then secure
by using bolts (#A).

8 / 9
Part #4 x1pc
Part #5 x2pcs
Hardware #B x4 pcs
Hardware #C x4 pcs
Hardware #F x4 pcs
Part #6 x2pcs
Hardware #G x12 pcs
#1
#6
#6
#4
#F #B #C
#D
#G
#D
#4
#5L
#5R
ASSEMBLY INSTRUCTIONS
3
4
Prepare 4 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#F).
Align legs (#5R/L) to the holes of the footboard (#4). Secure by using bolts (#F).
Attach bolts (#G) half way into the holes of the headboard (#1) and footboard (#4).
Align and hook side rails (#6) to the bolts (#G). Secure by tightening bolts (#G).

x 4
#8
#7
ASSEMBLY INSTRUCTIONS
9 / 9
5
Part #7 x8pcs
Part #8 x4pcs
6
Hardware #E x8 pcs
#8
#6
#6
#E
Attach support legs (#7) to the holes of the slats (#8), then adjust the leveler on the support
legs (#7) according to ground level.
Align slats to the side rails, secure by using screws (#E).