Furniture of America CM3920T-5PK User manual

Rev: 18-07-27
For more information contact our team: [email protected]

5/8
3/8

Align long and short aprons (#2,3) to the holes of the table legs (#4),
then secure by using bolts (#E).
Align table back to the table top (#1), then secure by using
screws (#B). There will be no pre-drilled holes on the
table top (#1).

DO NOT FULLY TIGHTEN BOLTS UNTIL
ASSEMBLY IS COMPLETED FOR CHAIRS
1) Align connecting bars (#7) to the
holes of the side frames (#5,6), then
secure lower holes of the connecting
bars (#7) by using bolts (#A).
2) Secure connecting bar
(#7) to side frames (#5,6)
by using bolts (#C).
3) Secure connecting bar (#7) to side
frames (#5,6) by using bolts (#C)
with washers (#D).
Align seat back (#8) to the holes of the frames,
then secure by using bolts (#A).

Rest seat board (#9) to the top of the table, then align
seat frame to the holes of the seat board (#9). Secure
by using bolts (#C).
ASSEMBLY COMPLETED