Furniture of America CM-BK967C-3D User manual

GIVE US CALL: 1-888-980-5122
1 / 13
MODEL #
CM-BK967C-3D
Questions?
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
2 - People
VERSION # 20-01-14
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ X13

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 13

4 / XXXXX13

CHEST
CM-BK967C-3D
#1 1pc #4 4pcs #2 1pc #3 1pc
#5 3pcs #6 3pcs
5 / 13
#7 3pcs #8 3pcs
#A 4pcs #D 1pc #B 8pcs #C 30pcs
Bottom Back Rail
Top Panel Right Side Panel Back Panel
Drawer Front Panel Drawer Back PanelDrawer Right Panel Drawer Bottom Panel
Bolt Ø1/4"x2-3/8" Screw #4x25mm Allen Key 4mm
Bolt Ø1/4"x 2"
#9 3pcs
Drawer Support
#10 1pc
Left Side Panel
#11 3pcs
Drawer Left Panel

6 / 13
#E 12pcs #F 4pcs #G 16pcs
Dowel #8x30mm Barel Nut Ø1/4" Screw #3.5x15mm
#1
#10
#2
#3
#4
#6
#5
#11
#8
#7
#H 6pcs
Screw #5/32x22mm
#I 3pcs
Holder
#K 12pcs
#9
Dowel #6x30mm

7 / 13
ASSEMBLY INSTRUCTIONS
#4
#1 x1pc
Hardware #E x4pcs
Part
1
2
#1
#E
Part #4 x4pcs
Hardware #E x8pcs
#E
#E
#E
Insert dowels (#E) to panel (#1).
Insert dowels (#E) to the rail (#4).

#9
#K
#11
#6
#K
8 / 13
ASSEMBLY INSTRUCTIONS
3
4
Part #9 x1pc
Part #6 x1pc
Part #11 x1pc
Hardware #K x4pcs
#K
x 3
#4
#10
#B
#D
Hardware #B x4pcs
Part #10 x1pc
#4
Insert dowels (#K) to panels
(#6,9,11).
Align panels (#4) to panels (#10), then secure by
using screws (#B).

9 / 13
ASSEMBLY INSTRUCTIONS
#A #F
#10
#1
#F
#1
#2
Hardware #A x2pcs
Hardware #F x2pcs
Part #1 x1pc
Hardware #A x2pcs
Hardware #B x4pcs
Part #2 x1pc
Hardware #F x2pcs
5
6
#B #D
#A #D
Align panel (#1) to panel (#10), then
secure by using bolts (#A) onto barrel
nuts (#F).
Align panel (#2) to the rest of the unit.
Secure panel (#4) to panel (#2) by
using screws (#B). Secure panel (#1)
to panel (#2) by using bolts (#A) onto
barrel nuts (#F).

#1
#10
#2
#3
#G
#C
#11
#7
#6
10 / 13
ASSEMBLY INSTRUCTIONS
Hardware #G x16pcs
Part #3 x1pc
Part #7 x1pc
Hardware #C x4pcs
7
8
x 3
Align back panel (#3) to the unfinished
side of the unit, then secure by using
screws (#G).
Align drawer panels (#6,7,11) together, then
secure by using screws (#C).