Furniture of America CM-AC6802 User manual

1. Prepare 3 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align the right armrest (#3)
to the holes along the back-
rest (#1), then insert the bolts
from within and secure.
1. Prepare 3 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align the left armrest (#4)
to the holes along the back-
rest (#1), then insert the bolts
from within and secure.
Note: Left and right is determined by facing
the front of the chair in its upright position.

1. Prepare 4 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Insert the bolts from within and
secure using the Allen wrench.
1. Insert the front legs (#5) into the holes along the front, turn right to tighten.
2. Insert the rear legs (#6,7) into the holes along the rear, then
insert 2 screws (#E) into each. Secure using a screwdriver.