Furniture of America CM5907-TV-60-3A User manual

ASSSEMBLY INSTRUCTIONS

 


BASIC ASSEMBLY TECHNIQUES
1
















C

















IT IS THE USER'S RESPONSIBILITY TO MAINTAIN THE FURNITURE.THE HARDWARE MAY
LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO
SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE
SERIOUS INJURY.
FAILURE TO FOLLOW THE GUIDELINES ABOVE MAY
RESULT IN INJURY AND/OR PROPERTY DAMAGE.
Page 2 of 10

Align side panels (#3) to the holes of the back panel (#2),
then secure by using bolts (#A).

Align support frames (#4) to the holes
of the back panel (#2), then secure by
using bolts (#B) with washers (#D).
Align top panel (#5) to the holes
of the unit.

Secure top panel (#5) to the
unit by using bolts (#C)
with washers (#E).
Align front frame (#1) to the holes of the
side frames (#3). Secure by using bolts
(#A) and bolts (#C) with washers (#E).
Secure here by using bolts
(#B) with washers (#D).

Align shelf panel (#6) to the holes of the unit, then
secure by using bolts (#C) with washers (#E).
Align shelf panel (#6) to the holes of the unit, then
secure by using bolts (#C) with washers (#E).

Align the threaded wheels (#7,8) to
the holes of the unit, then secure by
using wrench (#G) on the wheels
(#7,8).
Align bracket (#K) to the back of the unit,
then secure by using screws (#H).

Align the bracket (#K) to the wall. Make sure the
bracket (#K) is at the same height as the unit, then
secure by using screws (#J).