Furniture of America CM-AC807 User manual

1 / 16
MODEL #
CM-AC807
Questions?
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
VN
VERSION # 21-07-09
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)

2/ 16
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X16
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
scratches and damages.

4/ 16

Note :
Every cam lock bolt must have a cam
lock connector in order to fasten the
parts together.
CAM LOCK FASTENER
ASSEMBLY
INSTRUCTIONS
cam bolt cam lock screwdriver
4
Turn the cam lock clockwise gently
until it will not turn any more.
2
Insert the cam bolt into the
bolt hole of joint panel.
3
Align the cam lock with its side opening
(or arrow) pointing to cam bolt.
1
Screw the cam
bolt into panel.
5/ XXXXXXX16

BOOKCASE
CM-AC807
#1 1pc #2 1pc #3 1pc
6 / 16
Upper Left Side Panel
#4 1pc #5 1pc #6 1pc
#7 1pc
Top panel
Divider shelf Lower Left
Side Panel
#8 1pc
Left door
#9 1pc
Right door
#10 1pc
Bottom panel
Upper Right
Side Panel
Divider panel
Lower Right
Side Panel
VN

7 / 16
#A 25pcs
Cam-bolt Ø8mm
#B 25pcs #C 2pcs
#D 2pcs #E 12pcs #F 2pcs
Magnet
Cam-lock Ø15mm Handle
Handle bolt Ø5/32" x 1"
#G 4pcs
Screws 3 x 15mm
#H 24pcs #I 1pc
Wood dowel Ø8 x 30mm Allen Wrench 4mm
Screws #3 x 12mm
#J 1set
Anti-Tip Skit

8 / 16
Exploded View
#1
#3
#4
#5
#7
#9
#10
#8
#6
#2

ASSEMBLY INSTRUCTIONS
1
9 / 16
Part #1 x 1pc
2
Hardware #A x 8pcs
#1
#A
#A
Part #10 x 1pc
#10
#5
Part #5 x 1pc
Hardware #A x 8pcs
#A
Attach cam bolts (#A) to top (#1).
Attach cam bolts (#A) to bottom
(#10).
Attach cam bolts (#A) onto both sides of
divider panel (#5).

#A
#A
#A
#2
#3
#7
Hardware #A x 9pcs
Part #2 x 1pc
Part #3 x 1pc
Part #7 x 1pc
ASSEMBLY INSTRUCTIONS
10 / 16
3
4
#5
Hardware #F x 2pcs
Hardware #G x 4pcs
#F
#G
Align and secure magnets (#F) onto divider
(#5) by using screws (#G).
Attach cam bolts (#A) to side panels (#2,3,7).