Furniture of America Vodice CM7513Q User manual

MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)
1 / 9
CM7513Q/F
VERSION # 21-04-08

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 9

4 / XXXXX9

BED
#1 1pc
Headboard
#2 1pc #3 1pc
#A 4pcs
Bolt Ø5/16" x 50mm
#C 4pcs
#D 1pc
Lock Washer Ø5/16"
#B 4pcs
Allen Wrench 4mm
#E 26pcs
Flat Washer Ø5/16"
5 / 9
HB Leg (L)
Screw #4x30mm
#4 2pcs
Side Rail
#5 1pc #6 1set
Footboard Slat (13pcs)
HB Leg (R)
#7 4pcs
CM7513Q/F
Support Leg
30x30x100mm

Exploded View
#4
#1
#2
6 / 9
#3
#6
#5
#7

7 / 9
CM7513Q is packed in 2 cases
Carton Disignation Part Hardware
CM7513Q-HB
#1
CM7513Q-FBR
#2
#3
#4
#5
#6
#7
Headboard
HB Leg (L)
HB Leg (R)
Side Rail
Footboard
Slat (13pcs)
Support Leg
#A x4pcs
#B x4pcs
#C x4pcs
#D x1pc
#E x26pcs

ASSEMBLY INSTRUCTIONS
1
Part #1 x1pc
Part #2 x1pc
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
2
8 / 9
#4
#D
#5
#3
#2
#1
Part #3 x1pc
#A
#B
#C
#D
Part #4 x2pcs
Part #5 x1pc
Find and remove the headboard
legs (#2,3) from the back hidden
compartment of the headboard (#1).
Align headboard legs (#2,3) to the
headboard (#1), then secure by
using bolts (#A) with washers
(#B,C).
Align side rails (#4) to the headboard (#1)
and footboard (#5), then secure by using the
bolts and washers that are pre-attached to
the headboard (#1) and footboard (#5).

ASSEMBLY INSTRUCTIONS
9 / 9
3
4
Part #6 x1pc
Hardware #E x26pcs
Part #7 x4pcs
#6
#E
#7
Align slats (#6) to the side rails, then
secure by using screws (#E).
Align and attach support legs (#7) to
the fully extended slats (#6).