Furniture of America CM-BK588T User manual

Insert barrel nuts (#C) to the holes of the side rails (#5,6). Align
side rails (#5,6) to the holes of the guardrails (#1,2). Secure by
tightening bolts (#A) onto barrel nuts (#C).
1) Insert dowels (#I) to the dowel holes of the guardrails (#3,4).
Align side rails (#6,7), with inserted barrel nuts (#C), to the holes
of the guardrails (#3,4). Secure by tightening bolts (#A) onto
barrel nuts (#C), but do not fully tighten.
2) Align guardrails (#8,9) to the holes of
the side guardrails (#3,4). Secure by
using screws (#B).

Align guardrail supports (#10) to the middle of the
guardrails (#8,9), then secure by using screws (#F).
Align guardrail support (#11) to the
end of the guardrail (#9), then secure
by using screws (#E).
Insert metal dowels (#J) to the top of the lower
guardrails (#1,2), then align upper bunk to the
metal dowels (#J) of the lower bunk.

Align ladder rungs (#14) to the holes of the ladder rails (#12,13),
then secure by using screws (#L).
Align ladder to the bunk bed, then secure by using bolts (#D).

Align slat kits (#15) to the side rails, then
secure by using screws (#F).
Attach dowels (#H) to the holes of the front panel
(#16), then align the drawer sides (#17,18) to the
dowels of the front panel (#16).

Secure side drawer panels to front panel by using screws (#G).
Slide bottom panel (#20) through the thin lined gaps.