Furniture of America CM-BK960 User manual

1) Attach 2 dowels (#F) to each end of guardrails (#6), then insert barrel nuts
(#B) to the side holes of the guardrails (#6). Align guardrails (#6) to the top
holes of the headboard (#1,2). Secure by attaching bolts (#A) onto barrel nuts
(#B) of the guardrails (#6).
2) Insert barrel nuts (#B) to the side holes of the
upper side rails (#5). Align side rails (#5) to the
top holes of the headboard (#1,2). Secure by
attaching bolts (#A) onto barrel nuts (#B) of the
side rails (#5).
3) Insert barrel nuts to the side
holes of the lower side rails
(#4). Align the side rails (#4)
to the lower holes of the
headboard (#1,2). Secure by
attaching bolts (#A) to the
barrel nuts (#B) of the side
rails (#4).
Align guardrail supports (#7) to the center holes of the upper guardrails,
then secure by using bolts (#E).

Insert 2 dowels (#F) to each end of the
back guardrails (#9,10). Align and
attach back guardrails (#9,10) to the top
holes of headboard (#2). Secure by
using bolts (#C).
Do not attach headboard panel (#3).
1) Align crossbar (#11) to the bottom hole of the headboard (#2). Secure by
using bolts (#R).
2) Align foot plate (#13) to
the hole sof the headboard
panel (#2). Secure by using
bolts (#E).
Do not attach headboard (#3).

Align foot plate (#15) to the holes of
the headboard panel (#9). Secure with
bolts (#E).
Do not attach headboard (#3).
Align crossbar (#12) to the second step of the stair case. Secure by using
bolts (#D). Place foot plate (#14) to the top of the foot plate (#15).
Do not attach headboard panel (#3).

Align foot plate (#16) to the holes
of the headboard panel (#3).
Secure by using bolts (#E).
Do not attach headboard panel (#3).
Do not attach headboard panel (#3).
Align crossbar (#12) to the third step of the stair case. Secure by using
bolts (#D). Place foot plate (#14) to the top of the foot plate (#16).

Align foot plate (#16) to the holes of
the headboard panel (#3). Secure by
using bolts (#E).
Do not attach headboard panel (#3).
Align crossbar (#12) to the fourth step of the stair case. Secure by using bolts
(#D). Place foot plate (#14) to the top of the foot plate (#16).
Do not attach headboard panel (#3).

Align foot plate (#17) to the holes of the headboard (#2).
Secure by using bolts (#E).
Do not attach headboard panel (#3).
Align back guardrails (#9,10) to the holes of
the headboard panel (#3). Secure by using
bolts (#C).

Secure crossbar (#11) to headboard panel (#3) by using bolts (#R).
Secure foot plate (#13) to headboard panel (#3) by using bolts (#E).
Secure crossbars (#12) on each stair way steps to headboard panel (#3) by using bolts (#D).

Secure foot plate (#15)
to headboard panel
(#3) by using bolts
(#E).
Secure foot plate (#16) to headboard panel (#3) by using bolts (#E).
Secure foot plate (#17) to headboard
panel (#3) by using bolts (#E).
Back
Front
1) Align scroll bars (#O) to each steps of the stairs. Secure the back
of the scroll bars (#O) by using screws (#J). Secure the front of the
scroll bars (#O) by using screws (#H).
2) Align iron basin (#M) to the back of the
scroll bar (#O), then secure by using screws
(#K).

Align back plane (#26) to the holes in the back of the stair case.
Secure by using screws (#K).
1) Insert dowels (#G) to the holes of the front drawer panel (#18,19). Align and
attach drawer side panels (#20,21) to the dowels of the front drawer panels
(#18,19). Secure by using screws (#I).
2) Slide bottom panel (#24,25) to the gaps of the drawer. Make sure bottom panel (#24) is with front
drawer panel (#18) and bottom panel (#25) is with front drawer panel (#19).

Align back panel (#22,23) to the holes of the drawer side panels, then secure by using screws (#I). Make sure
the back drawer panel (#22) is connected to drawer that has front panel (#18) and bottom panel (#24). Make
sure the back drawer panel (#23) is connected to drawer that has front panel (#19) and bottom panel (#25).
Align scroll bar (#N) to the bottom of each drawers.
Secure front of drawer by using screws (#K). Secure
back of drawers by using screws (#L).

Align knob (#P) to the front of the drawer panel, then secure by using bolts (#Q).
Drawer with panels (#18,24,22) goes to bottom of stair case.
Attach drawer rails to the rails of the staircase.

Align slat kits (#8) to the top and bottom bunk side rails,
then secure by using screws (#H).