Furniture of America CM3172T User manual

1 / 7
CM3172T
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
MODEL #
VERSION # 21-03-02

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX7

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX7

4 / XXXXXXX7

Allen Key 4mm
Flat Washer Ø1/4"
Lock Washer Ø1/4"
Table Top
Table leg
Cross Bar Finial
Hex Nut
Bolt Ø1/4" x 3-1/2"
#1
#2
#3
#4
#4
TABLE
CM3172T
#1 1pc #2 2pcs #3 1pc
#A 4pcs #B 4pcs #C 4pcs
5 / 7
#4 2pcs
#D 4pcs
#E 1pc #F 8pcs #G 8pcs #J 8pcs
Bolt Ø1/4" x 3-1/2" Lock Washer Ø1/4"
Flat Washer Ø1/4"

#A #C #D
#E #B
#2
#2
#3
#1
#F #G #J
#E
1
2
Part #2 x2pcs
Part #3 x1pc
Hardware #A x4pcs
Hardware #C x4pcs
Hardware #D x4pcs
Part #1 x1pc
6 / 7
ASSEMBLY INSTRUCTIONS
Hardware #B x4pcs
Hardware #F x8pcs
Hardware #J x8pcs
Hardware #G x8pcs
Prepare 4 bolts assembly by
inserting lock washer (#C),
then flat washer (#D) onto
bolts (#A). Insert nuts (#B)
into crossbar (#3). Align
crossbar (#3) to the holes of
the legs (#2), then secure with
bolts (#A) by catching onto
nut (#B).
Prepare 8 bolts assembly
by inserting lock washer
(#G), then flat washer (#J)
onto bolts (#F). Align legs
(#2) to the holes of the
table top (#1), then secure
with bolts (#F).

#4
#4
3
4
7 / 7
ASSEMBLY INSTRUCTIONS
Part #4 x2pcs
Attach the decorative block (#4) over the bolts of the legs (#2).