Furniture of America CM-BK717 User manual

CM-BK717
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
1 / 11
VERSION # 20-06-18
MODEL #

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX11

4 / XXXXXXX11

Bolt 1/4"X4"
Bolt 1/4"X1-1/2" Allen Wrench M4
Headboard Bottom Side Rail Bottom Front Headboard Top Left
Headboard Top Right Ladder Side Right
Side Rail Bottom Back
Side Rail Top Front Side Rail Top Back
Ladder Side Left Ladder Slat Slat (13pcs)
BUNKBED
CM-BK717
#1 2pcs #2 1pc #3 1pc
#A 19pcs #B 19pcs #C 8pcs
#4 1pc
#5 1pc #6 1pc #7 1pc #8 1pc
#D 4pcs
#E 4pcs #F 1pc #G 52pcs
#9 1pc #10 4pcs #11 2Set
5 / 11
Socket Bolt 1/4"x2-1/2"
Nut 1/4"X1/2" Steel Tenon Ø10"x3-1/2"
Screw #8X1-1/4"

#4
#5
#1
#1
#7
#6
#2
#9
#8
#10
#11
#11
#3
#6
Exploded View
6 / 11

CM-BK717 is packed in 4 cases
Carton Disignation Part Hardware
Headboard Top Left
CM-BK717-1
Side Rail Bottom Front
Side Rail Bottom Back
Side Rail Top Front
Side Rail Top Back
Ladder Side Right
Ladder Side Left
Ladder Slat
Slat
Headboard Top Right
Headboard Bottom
CM-BK717-2
CM-BK717-3
CM-BK717-4
#A 19pcs
#B 19pcs
#C 8pcs
#D 4pcs
#E 4pcs
#G 52pcs
#F 1pc
#4
#5
#1
#2
#3
#6
#7
#8
#9
#10
#11
7 / 11

#F
#A
#B
#3
#2
#1
#1
#B #F
#A
#A
#B
#F
#6
#7
#4
#5
1
2
Part #1 x2pcs
Part #2 x1pc
Hardware #A x8pcs
Hardware #B x8pcs
ASSEMBLY INSTRUCTIONS
Part #3 x1pc
Part #4 x1pc
Part #5 x1pc
Hardware #A x11pcs
Hardware #B x11pcs
Part #6 x1pc
Part #7 x1pc
8/ 11
1. Insert the nuts (#B) into
the holes along the inner
sides of the side rails
(#2,3), make sure the
holes face the openings.
2. Align the headboards (#1)
then insert the bolts (#A),
make sure they enter
the nuts and secure.
1. Insert the nuts (#B) into
the holes along the inner
sides of the side rails
(#6,7), make sure the
holes face the openings.
2. Align the headboards (#4,5)
then insert the bolts (#A),
make sure they enter
the nuts and secure.

#C
#C
#F
#F
#9
#8
#10
#D
#D
#D
#D
3
4
Part #8 x1pc
Part #9 x1pc
Hardware #C x8pcs
Hardware #D x4pcs
ASSEMBLY INSTRUCTIONS
Part #10 x4pcs
9 / 11
Align the ladder slats (#10) to the holes along
the ladder left and right (#8,9), then insert
the socket bolts (#C) into each hole. Secure.
Insert the steel tenons
(#D) into each hole,
then place the top
bed
onto those tenons.

#F #E
#F
#E
#11
#11
#G
5
6
Hardware
Hardware #G x52pcs
ASSEMBLY INSTRUCTIONS
#E x4pcs
10 / 11
Align the ladder, then
insert the bolts (#E) into
each inner hole. Secure
using the Allen wrench (#F).
Place the slats (#11) onto
each bed, then insert a
screw (#G) into each end.
Secure using a screwdriver.