Furniture of America CM-BK918 User manual

For more information contact our team: [email protected]

Align guardrails (#3,4,13) and bottom tubes (#5,6) to the holes of the headboards (#1,2),
then secure by using bolts (#D).

Align slats (#7,8,9,10,11,12) to the holes of
each bunks, then secure by using bolts (#A) as
shown in the diagram.
1) Align center support tubes
(#14) to the center holes of
the slats on the middle and
lower bunk. Secure by using
bolts (#A).
2) Secure two middle holes of the center
tubes (#14) to the slats by using bolts (#B).
3) Align support legs (#18) to the holes of the
slats, then secure by using bolts (#B).

ASSEMBLY COMPLETED
1) Align steps to the holes of the ladder frames
(#15,16), then secure by using bolts (#C).
2,3) Align ladder to the holes of the bunk bed,
then secure by using bolts (#C).