Furniture of America CM3555RT User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
CM3555RT
Allen Wrench (Included)
Assembly Instructions
Tools Required for Assembly:
Rev.14-03-25
Page 1 of 4
DIFFICULT
ASSEMBLY RATING
2 PERSONS RECOMMENDED

Page 2 of 4

Parts List
#1 x 1 pc
Table Top
#2 x 4 pcs
Leg
#A x 8 pcs
Bolt 5/16”x3”
#B x 8 pcs
Lock Washer
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
#C x 8 pcs
Flat Washer
Due to the size and/or weight of this product, it is highly
recommended that the assembly should be done near
the area of its intended location. Make sure you have
enough space to move around during the assembly.
ALWAYS have at least two people to help with
transporting and assembling the product and to avoid
any potential injury and/or damage.
MD
Page 3 of 4
#D x 1 pc
Allen Wrench
Hardware List

I. With the help of another person, carefully place the table top
(#1) facing down on a protected surface.
II. Align the leg (#2) with the bottom corner of the table top (#1).
III. Prepare two bolt assemblies by inserting FIRST the lock
washer (#B) onto the bolt (#A) and then the flat washer (#C)
onto the SAME bolt (#A), in that order.
IV. Insert the bolt assemblies through the two pre-drilled holes on
the bottom corner of the table top (#1) and secure those bolts
using the Allen wrench (#D) to lock them in with the leg (#2).
V. Repeat the process to assemble the remaining 3 legs (#2) onto
the table top (#1).
Turn right (clockwise) to tighten
Page 4 of 4
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
With the help of another person, carefully turn the completed
table upright. Make sure the table is rested on a flat surface
and it does not feel loose or wobbly. If it does, double check
that the bolts are secured and properly tighten.
ASSEMBLY IS COMPLETED