Furniture of America Olga CM-BK917F User manual

For more information contact our team: [email protected]

1) Align lower frame (#11) to the holes of the posts (#1,2,3,4).
Secure by using bolts (#E).
2) Align headboard panels (#10) to the holes of the posts (#1,2,3,4).
Secure by using bolts (#A).

1) Align lower tubes (#8,9) to the holes of the headboards.
Secure by using bolts (#F).
2) Align guardrails (#5,6,7) to the holes of the headboards, then secure
by using bolts (#E,F) as shown in the picture.
1) Align center support tubes to the holes of
each bunks. Secure by using bolts (#D).
2) Align slats (#14,15) to the holes of the top and middle bunks,
then secure by using bolts (#B). Align slats (#14,16) to the
holes of the bottom bunk, then secure by using bolts (#B).
3) Secure center support tube (#17) from bottom
bunk to the holes of the slats (#16), then secure
by using bolts (#C).

1,2) Align long ladder (#12) to the
holes of the bunk bed, then secure
by using bolts (#D) as shown in the
picture.
3) Align shorter ladder (#13) to the holes of
the bunk bed, then secure by using bolts (#D).
4) Align support legs (#18) to the lower bunk holes,
then secure by using bolts (#B).
ASSEMBLY COMPLETED