Furniture of America CM-BK970 User manual

1 / 12
MODEL #
CM-BK970
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY
VERSION # 20-01-11
DIFFICULT
Phillips
Screwdriver
2 - People
(Not Included)
(Included)
Allen Wrench
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 12

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X12

4 / 12

BED
CM-BK970
#1 2pcs #2 2pcs #3 1pc #4 1pc
#5 1set #6 1pc
5 / 12
#8 1pc#7 3pcs
#10 2pcs #11 4pcs
#13 1pc
Slat (13pcs)
Left Headboard Right Headboard
Short Guadrail Long Guadrail
Front Side rail Guadrail Support
Bookcase Right Ladder Rail Ladder Rung
Chest
#9 1pc
Left Ladder Rail
#12 1pc
#14 1pc
Back Side rail
Guadrail Support

6 / 12
#A 8pcs #B 9pcs #C 1pc #D 26pcs
#E 8pcs #F 12pcs #G 6pcs #H 6pcs
Bolt Ø5/16"x4" Bolt Ø1/4"x1-1/4" Allen Key 4mm Screw #4x35mm
Screw Ø1/4"x3-1/8"Barel Nut Ø5/16"
Bolt Ø1/4"x2"
Dowel #10x40mm Bolt Ø1/4"x1-5/8"
#I 8pcs #K 6pcs
Bolt Ø1/4"x2-3/8"
#L 4pcs
Dowel #10x30mm
#3
#7
#2
#7
#14 #4
#1
#8
#13
#9
#7
#10
#11
#12
#5
CM-BK970-4
#6

CM-BK970 is packed in 5 cases
7 / 12
#3
#4
#5
#6
#7
#8
#10
#11
#12
#14
Left Headboard
#1
#2
#9
Carton Disignation Part Hardware
CM-BK970-1
#A x 8pcs
#B x 9pcs
#C x 1pc
#D x 26pcs
#E x 8pcs
#F x 12pcs
#G x 6pcs
#H x 6pcs
#I x 8pcs
#K x 6pcs
#L x 4pcs
CM-BK970-2
CM-BK970-3
CM-BK970-2
Right Headboard
Slat (13pcs)
Short Guadrail
Long Guadrail
Font Side Rail
Guadrail Support
Guadrail Support
Back Side Rail
Right Ladder Rail
Ladder Rung
Left Ladder Rail
Bookcase
Left Frame
Right Frame
Back Rail
Top Panel
Shelf Panel
Chest
#N x 8pcs
#O x 20pcs
CM-BK970-4
CM-BK970-5
CM-BK970-4
#C x 1pc
#M x 8pcs
#K x 2pcs
#15
#16
#17
#18
#19
#13

#C
#6
#3
#4
#A
#1
#2
#G
8 / 12
ASSEMBLY INSTRUCTIONS
#F
#2
#1
#E
#E
#1 x2pcs
Part #2 x2pcs
Hardware #F x12pcs
Part
#3 x1pc
Part #4 x1pc
Part #6 x1pc
Part
Hardware #E x8pcs
Part #14 x1pc
#14
Hardware #A x8pcs
Hardware #G x6pcs
1
2
#C
#A
#C
#F
Insert dowels (#F) to panels (#1,2).
Align side rail (#14) to the headboards
(#3,4), then secure by using bolts (#A)
onto barrel nuts (#E).
Align guardrails (#1,2) to headboard
(#3,4), then secure by using screws (#G).
Align side rail (#6) to the headboards
(#3,4), then secure by using bolts (#A)
onto barrel nuts (#E).

9 / 12
ASSEMBLY INSTRUCTIONS
#3
#4
#7
#2
#K
#L
#L
#K #C
#4
#9
#C
#B
#L
#7 x3pcs
Part
Hardware #B x9pcs
Part #9 x1pc
Hardware #L x4pcs
Hardware #K x2pcs
3
4
#H
#C
Hardware #H x4pcs
CM-BK970-4
#C
#7
#7
Align supports (#7) to the
guardrails ,then secure by
using bolt (#B).
Align support (#8) to the
guardrails, then secure by
using bolts (#H).
#8
Insert dowels (#L) onto the top
holes of the bookcase (#9) and
CM-BK970-4. Align bed on the top
as shown in the diagram, then
secure by using bolts (#K).

10 / 12
ASSEMBLY INSTRUCTIONS
#10
#9
#12
#11
Hardware #K x2pcs
Part #10 x1pc
Part #11 x4pcs
Part #12 x1pc
5
6
#K
#C
CM-BK970-4
Hardware #I x8pcs
#C
#I
#I
#C
Secure bed to unit on the back side
by using bolts (#K).
Align ladder rungs (#11) to ladder rails
(#10,12), then secure by using screws (#I).

#4
#C
#H
#C
#10
#13
11 / 12
ASSEMBLY INSTRUCTIONS
Hardware #H x2pcs
Hardware #K x2pcs
Hardware #D x26pcs
7
8
#12
#K
#D
#5
#5 x1set
Part
Align ladder to bunk bed, then secure by
using bolts (#K,H) as shown in the
diagram.
Align slats (#5) to the bed, then
secure by using screws (#D).

12 / 12
ASSEMBLY INSTRUCTIONS
9
10
Attach drawer handles to the
front of the drawers.

SAFETY WARNING
To help prevent serious or fatal injuries from entrapment or falls
.Follow the information on the warnings appearing on the upper bunk bed structure and on thi
carton. Do not remove warning label from the bed.
. Always use the recommended type and size mattress or mattress support, or both, to help prevent
the likehood of entrapment or falls.
. Periodically check and ersure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
. Never allow a child under 6 years of age to use the upper bunk.
. Use only mattress which is 74”-75” long and 38-1/2” wide on upper bunk.
. Ensure thickness of mattress for upper bunk does not exceed 6” . Thicknes of mattress for lower
bunk is from 6”.
. Surface of mattress must be at least 5 in. (127mm) below the upper edge of guardrails.
. Prohibit horseplay on or under bed (s)
. Prohibit more than one person on upper bunk.
. Prohibit humping on the bed.
. Always use the ladder for entering and leaving the upper bunk.
. Do not use substitute parts. Contact the dealer for replacement parts.
. Use of a night light may provide added safety precaution for a child using the upper bunk.
. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall. The guardrail that runs the full length of the bed shuold be placed against the wall to prevent
entrapment between the bed and wall.
. The use of water or sleep flotation mattresses is prohibited.
. Do not exceed 175 lbs on upper bunk.
.Weight limitation: 175lbs.
STRANGUILATION HAZARD –Never attach or hang items to any part of the
bunk bed that are not desinged for use with the bed for exarnple, but not limited to hooks, belts and
jump ropes
Keep these instructions for future reference

1 / 8
MODEL #
CM-BK970-4
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY
VERSION # 20-01-11
DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX8

4 / XXXXXXX8

DESK
#16 1pc #18 1pc
5 / 8
#C 1pc #M 8pcs
Right Frame Top Panel
Back Rail
#17 3pcs
Allen Key 4mm Bolt Ø1/4"x3-3/8" Washer Ø1/4"
#N 8pcs
CM-BK970-4
#K 2pcs
Bolt Ø1/4"x2-3/8"
#O 20pcs
Dowel #8x30mm
#15 1pc
Left Frame
#19 1pc
Shelf Panel

6 / 8
#15
#17
#17
#18
#19
#16
Exploded View
#O
#O
#O
#O #18
#19
#17
1
#17 x3pcs
Part #18 x1pc
Part
#19 x1pc
Part
Hardware #O x20pcs
Insert dowels (#O) to panels
(#17,18,19).

7 / 8
ASSEMBLY INSTRUCTIONS
#15
#N
#M
#C
#N
#17
#17
#18
#19
#M
#C
#15 x1pc
Part #17 x3pcs
Hardware #M x3pcs
Part
Hardware #N x3pcs
Hardware #K x1pc
Hardware #M x1pc
Hardware #N x1pc
#15
2
3
#C
#K
#18 x1pc
Part #19 x1pc
Part
Align panels (#17) to side frame (#15),
then secure by using bolts (#M) onto
washers (#N).
Align panels (#18) onto side frame (#15), then
secure by using bolts (#K). Align panel (#19)
onto side frame (#15), then secure by using
bolts (#M) with washers (#N).