Furniture of America Ventura CM5278-TV-54-3A User manual

1. Place the top panel (#1) face down onto
a protected surface, then align the legs
(#2) to the holes along the corners.
2. Insert 2 bolts (#A) into each corner
and secure using the Allen wrench.
Align the middle shelf (#3) face down to
the holes along the sides of the legs
(#2). Insert a bolt (#A) into each corner,
then secure using the Allen wrench (#C).

Align the bottom shelf (#4) face down to the holes along the bottom of the legs
(#2). Insert a bolt (#B) into each corner, then secure using the Allen wrench (#C).
Align the leg supporter
(#5) to the holes along
the bottom shelf, then
insert 2 bolts (#A) and
secure using the Allen
wrench (#C).

Align the back supporters (#6) to the holes along the back
of the TV stand, make an "X" formation, then insert a bolt
(#A) into each end. Secure using the Allen wrench (#C).
ASSEMBLY IS COMPLETED