Furniture of America YNJ-1411-4 User manual

ASSEMBLY INSTRUCTIONS
EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For most
products, two persons are recommended.
YNJ-1411-4
Tools Required for Assembly:
Rev.14-06-23
Page 1 of 7
DIFFICULT
ASSEMBLY RATING
Phillips Screwdriver
(Not Included)
2 PERSONS RECOMMENDED
Allen Wrench (Included)

Page2of7

Unless you are particularly adept at assembling flat-pack/knock-down
furniture, we understand building ready-to-assemble furniture can be a
frustrating experience for some. To help avoid confusion and to make
the assembly process quicker and smoother, we have provided some
helpful tips. Before you begin the assembly, please read the following:
1. Due to the size and/or weight on most of the ready-to-assemble furniture, it is
highly recommended that the assembly should be done near the area of its
intended location. Make sure you have enough space to move around during
the assembly. ALWAYS have at least two people to help with transporting and
assembling of the product to avoid any potential injury and/or damage.
2. To protect from damage, assemble the item on a clean, protective surface,
such as on a carpet or cardboard.
3. Make sure you have taken all the parts and hardware out of their packaging.
Do not throw away packaging material until assembly is completed.
4. Make sure all parts and hardware are accounted by comparing the actual parts
and hardware to the list provided in the assembly instructions. Also check for
irregularity such as crack, flaw or improperly drilled hole. If there is any
problem or missing piece, please contact the manufacturer or the supplier. By
having the model number, part number and a brief description of the problem
ready will help expedite the replacement process.
5. Read the entire instructions and view the diagrams first before assembling.
Arrange your parts in order of use and group the identical hardware together
will make it easier to grab each piece as you begin to assemble.
6. During the assembly process, make sure all parts are properly aligned before
tighten with the tool provided or required for the assembly. Do not use power
tools and do not over tighten.
7. When applying glue to the wood dowels to bond the parts together,pleasebe
ABSOLUTELY certain that the parts are correct and line up with each other
(refer to diagrams and take notice of the various pre-drilled hole locations).
When in doubt, assemble the parts together first and if the parts fit right, then
apply glue to the wood dowels.
PRE- ASSEMBLY INTRODUCTION
Page 3 of 7

CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS
Page 4 of 7

Before you begin,
Please read “Assembly
and Care Advice” and
“Pre-Assemble
introduction
1/5
HARDWARE LIST
8PCS 8PCS 36PCS 1PC 1PC
1 2 345
DIMENSION :35.43" (W) X 13.94" (D) X69.76" (H)
C
2PCS
5PCS
4PCS
2PCS
2PCS
B
B
B
BOOKCASE
Please keep for future reference
MODEL # YNJ-1411-4
PARTS LIST
ASSEMBLY INSTRUCTIONS
A
A
C
CC
D
D
E
E
35.43" (W)
13.94" (D)
69.76" (H)
Page 5 of 7

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
STEP : 1
STEP : 2
Hardware 1 =8pcs
Hardware 2 =8pcs
Hardware 3 =16pcs
C
B
2
prepare and insert wood
dowels into panels
prepare and screw cam
lock pin into panels
1
2
D
EDE
E
D
4
3
use allen key
to fasten allen-head
wood screw
X4
X2
X2
Page6of7

STEP : 3
STEP : 4
Hardware 3 = 20pcs
B
C
C
1
4
use allen key
to fasten allen-head
wood screw
A
A
Make sure the item on a flat
surface and it does not feel loose or wobbly.
lf it does double check that the bolts/screws
are secured and properly tighten.
ASSEMBLY IS COMPLETED
3
ASSEMBLY INSTRUCTIONS
Page 7 of 7