Furniture of America CM-BR6911 User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
CM-BR6911
Assembly Instructions
Tools Required for Assembly:
Rev.14-10-09
Page 1 of 5
DIFFICULT
ASSEMBLY RATING
Allen Wrench (Included)
Wrench
(Included)

Page 2 of 5

Parts List
#1 x 1 pc
Gas Lift Cylinder
#2 x 1 pc
Lift Handle
#3 x 1 pc
5-Star Base
#A x 4 pcs
Bolt M6x14mm
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
MD
Page 3 of 5
#4 x 1 pc
Seat
#5 x 5 pcs
Caster
#B x 1 pc
Allen Wrench
#C x 1 pc
Wrench

Page 4 of 5
#A x 4 pcs
Turn right (clockwise) to tighten
I. Carefully place the seat (#4)
facing down over a protective
surface.Align the lift handle
(#2) with the pre-drilled holes
on the bottom of the seat (#4).
II. Insert 4 bolts (#A) through the
lift handle (#2) and secure
those bolts using the Allen
wrench (#B) to lock them with
the seat (#4).
Turn right (clockwise) to tighten
Secure the 5 casters (#5) using the wrench
(#C) to tighten them onto the 5-star base (#3).

Page 5 of 5
I. Place the seat (#4) over the top of the assembled gas lift
cylinder (#1).
II. Check to make sure all parts are secured, the chair is stable
and the up/down lift is working properly.
ASSEMBLY IS COMPLETED
Remove the protective plastic cap on the end of the gas lift cylinder
(#1). Insert the gas lift cylinder (#1) into the 5-star base (#3).