Furniture of America CM3212T User manual

MON-FRI 8:30AM - 5:30PM (PST)
GIVE US CALL: 1-888-980-5122
Questions?
CM3212T
MODEL #
1 / 9
Recommended
Allen Wrench
(Included)
2 - People
DIFFICULTEASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
TOOLS REQUIRED
(Included)
Wrench
ASSEMBLY RATING
VERSION # 20-09-07

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXXX9

#5
#4
#2
#1
Wrench
#F 1pc
Helix Ø5/16"
#E 12pcs
Bottom Leg
#5 6pcs
Pedestal
#4 2pcs
Support Panel
#3 2pcs
CM3212T
Leaf
Table Top
#B 26pcs
Lock Washer Ø5/16" Allen Wrench M4
#D 1pc#C 26pcs
Flat Washer Ø5/16"
Bolt Ø5/16" x 1-1/2"
#A 14pcs
#2 2pcs#1 1pc
5 / 9
TABLE
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
PARTS
HARDWARE

#4
#5
#2
Leaf
#1
CM3212T-1
6/ 9
#Fx 1pc
#A x 14pcs
#Bx 26pcs
#Cx 26pcs
#Dx 1pc
#Ex 12pcs
Support Panel #3
Carton Disignation Part Hardware
Bottom Leg
CM3212T-2 Pedestal
CM3212T is packed in 2 cartons
Table To
p

#3 x2pcs
Part
#4 x2pcs
Part #5 x6pcs
Part
#3
#D
#A
#B
#C
#F
#E
#B
#C
#4
#5
panel (#3). Secure using the Allen wrench.
Insert 3 insert the center of each support
a flat washer (#C) onto that same bolt (#A).
a lock washer (#B) onto the bolt (#A) then
3. Prepare 6 bolt assemblies by first inserting
(#4) and align the holes.
onto the top of the pedestal
2. Place the support panel (#3)
(#4) face up.
1. Turn the pedestal
#C x6pcs
Hardware
#B x6pcs
Hardware
#A x6pcs
Hardware
order onto the ends. Secure using the wrench.
lock washer (#B) and a hex nut (#E) in that
pedestal (#4), then apply a flat washer (#C),
legs (#5) into the holes located around the
2. Insert the threaded ends along the bottom
(#4) face down.
1. Place the pedestal
2
#C x12pcs
Hardware
#B x12pcs
Hardware
#E x12pcs
Hardware
7 / 9
1
ASSEMBLY INSTRUCTIONS

#2 x1pc
Part
#2
#D
#A
#B
#C
#1
#1 x1pc
Part
the center of the railing.
2. Place the leaf (#2) onto
the table top (#1) outward.
1. Push the outer sides of
of the table top.
located on the bottom
3. Unlock the latches
using the Allen wrench.
pedestal (#4). Secure
Insert 4 bolts into each
that same bolt (#A).
a flat washer (#C) onto
onto the bolt (#A) then
ing a lock washer (#B)
mblies by first insert-
2. Prepare 6 bolt asse-
onto the table top.
pedestals (#4) face down
surface, then place the
face down onto a protected
1. Place the table top (#1)
4
#C x8pcs
Hardware
#B x8pcs
Hardware
#A x8pcs
Hardware
8 / 9
3
ASSEMBLY INSTRUCTIONS

(#1) inwards and secure the latches.
Slide the outer ends of the table top
6
9 / 9
5
ASSEMBLY INSTRUCTIONS