Furniture of America FOA3779PC-2PK User manual

FOA3779PC-2PK
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 7
TOOLS REQUIRED
MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
2 - People
Recommended
VERSION # 20-02-18

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / XXXXXXX7

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX7

4 / XXXXXXX7

3pcs
JCBC BOLT
M6 x 50mm
#A
1pc
ALLEN WRENCH
#G
1pc
BACKREST
#11pc
CUSHION SEAT
#21pc
#3
11pcs
#D
#C
#B4pcs 4pcs
#E
M6 SPRING WASHER
M6 FLAT WASHER
11pcs
JCBC BOLT
M6 x 60mm
JCBC BOLT
M6 x 90mm
6pcs
#F
CSK SCREW
M4 x 38mm
1pc
#51pc
#6
FRONT STRETCHER LEFT STRETCHER
(CL)
1pc
#7
RIGHT STRETCHER
(CR)
x2
FRONT LEG - LEFT
(CL)
1pc
#4
FRONT LEG - RIGHT
(CR)
COUNTER HT. CHAIR
5 / 7
FOA3779PC-2PK

ASSEMBLY INSTRUCTIONS
1
2
Part #1 x 1pc
Part #2 x 1pc
Hardware #A x 2pcs
Hardware #C x 4pcs
Hardware #D x 6pcs
Hardware #E x 6pcs
#A
#D
#E
#G
#C
#D
#E
#G
#B
#D
#E
#G
Part #3 x 1pc
Part #4 x 1pc
Hardware #B x 4pcs
Hardware #D x 4pcs
Hardware #E x 4pcs
#2
#1
#2
#1
#4
#3
6 / 7
Align chair back (#1) to seat (#2), then
secure middle holes by using bolts (#A)
with washers (#D,E). Secure corner
holes by using bolts (#C) with washers
(#D,E).
Align legs (#3,4) to the seat (#2), then secure by
using bolts (#B) with washers Do not fully
tighten bolts (#B).

ASSEMBLY INSTRUCTIONS
3
4
Part #5 x 1pc
Part #6 x 1pc
Part #7 x 1pc
Hardware #F x 6pcs
#2
#F
#7
#4
#6
#5
#3
7 / 7
Align stretchers (#5,6,7) to the legs, then
secure by using screws (#F). Fully
tighten bolts (#B) on front legs (#3,4).