Furniture of America Opal CM-BK938 User manual

Rev: 18-07-06
For more information contact our team: [email protected]

#F x 2pcs
#G x 4pcs

#L

Align bed slat (#3) to the holes of the left
and right headboard (#1,2). Secure by
using bolts (#C) with washers (#A).

#L
#J
#J
Align desk top (#4) to the holes of the
left and right headboards (#1,2).
Secure by using bolts (#C)
with washers (#A).
Secure by using bolts (#F) with washers (#J).
Align support bar (#5) to the headboards
(#1,2), then secure by using bolts (#C) with
washers (#A).

#G x 4pcs
#G
#G
#G
#G
#L
Align support bracket (#9) to the holes of the shelf (#10),
then secure by using screws (#E).
Align shelf side frames (#6,7) to the holes of the
connect tubes (#8), then secure by using bolts (#G).
Align shelf (#10) to side frames (#6,7), then secure by
using screws (#E).

#L
#L #I
#I
Align side frames of shelf (#6,7) to the holes,
then secure by using bolts (#D).
Align top guardrail (#11) to the headboards (#1,2),
then secure by using bolts (#B) with washers (#I)
onto hex nut (#H).

#H
#I
#I
1) Place bunk bed by the wall to measure out the general area of where
the wall anchor should be placed.
2) Secure metal plate (#N) to the wall anchor (#O) by using screws (#M).
Align top guardrail (#11) to the
headboards (#1,2), then secure by
using bolts (#B) with washers (#I)
onto hex nut (#H).

Attach the straps (#P) to the guardrail and
metal plate.