Furniture of America CM3311BN User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
CM3311BN
Allen Wrench (Included)
Assembly Instructions
Tools Required for Assembly:
Rev.14-08-26
Page 1 of 4
DIFFICULT
ASSEMBLY RATING

Page 2 of 4

Parts List
#1 x 4 pcs
Leg
#2 x 1 pc
Bench
#A x 8 pcs
Flat Washer
#B x 8 pcs
Lock Washer
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
#C x 8 pcs
Bolt 5/16”x2”
Due to the size and/or weight of this product, it is
highly recommended that the assembly should be
done near the area of its intended location. Make
sure you have enough space to move around during
the assembly. ALWAYS have at least two people to
help with transporting and assembling the product to
avoid any potential injury and/or damage.
MD
Page 3 of 4
#D x 1 pc
Allen Wrench
Hardware List

I. Carefully place the bench (#2) facing down on a protected surface.
II. Align the 4 legs (#1) with the pre-drilled holes on the bottom corners of the bench
(#2).
III. Prepare 8 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt
(#C) and then the flat washer (#A) onto the SAME bolt (#C), in that order.
IV. Insert the bolt assemblies through the pre-drilled holes on the bottom corners of
the bench (#2) and secure those bolts using the Allen wrench (#D) to lock them
with the 4 legs (#1).
V. Carefully turn the completed bench upright. Make sure the bench is rested on a
flat surface and does not feel loose or wobbly. If it does, double check that the
bolts/screws are secured and properly tightened.
Turn right (clockwise) to tighten
Page 4 of 4
ASSEMBLY IS COMPLETED
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs