Furniture of America CM7902T User manual

Hook the ends of the side rails (#3) into the designated slots along the sides of
the headboard (#1) and footboard (#2). Make sure parts are firmly secured.
Align the ends of the bed
slat (#4) to the inner sides
of the side rails (#3). Insert
a total of 8 wood screws (#A)
and secure using a Phillips
screwdriver.
Make sure all parts are firmly secured.
ASSEMBLY IS COMPLETED

Hook the ends of the side rails (#3) into the designated slots along the sides of the
headboard (#1) and footboard (#2). Make sure parts are firmly secured.
Insert the threaded ends of the slat support legs (#5) into the pre-drilled holes along the bottom
of the bed slat (#4). Turn right to tighten. Repeat process on the second set of bed slats (#4).

Align the ends of the bed
slats (#4) to the inner sides
of the side rails (#3). Insert
a total of 8 wood screws (#A)
and secure using a Phillips
screwdriver.
Make sure all parts are firmly secured.