Furniture of America Ann CM3752PT-5PK User manual

CM3752PT-5PK
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 9
TOOLS REQUIRED
MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
2 - People
Recommended
VERSION # 20-07-03

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX9

4 / XXXXXXX9

CM3752PT-5PK
#1 1pc
5 / 9
#A 12pcs
Table Top
#3 1pc
Bolt ∅5/16"X2-1/2''
#B 12pcs
Spring Washer ∅5/16" Flat Washer ∅5/16"
#C 12pcs
#D 1pc
Wrench 12mm
#2 4pcs
Table leg Table Shelf
5PC. COUNTER HT. TABLE SET-TABLE
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
PARTS
HARDWARE
#1
#2
#3

6 / 9
1
Part #1 X 1pc
Part #2 X 4pcs
Hardware #A X 8pcs
#B X 8pcs
#C X 8pcs
1)Prepare 8 bolts assembly by Spring Washer (#B),than flat washer (#C)
onto bolts(#A).Align legs (#2)to the holes of the table top (#1).secure by
ueing bolts (#A) ,but do not fully tighten.
ASSEMBLY
COMPLETED
Please ensure the
furniture rests on even
and flat surface. If the
product wobbles or feels
loose, double-check all
bolts and/or screws are
ptoperly tightened and
secured.
Keep this handy!
Please retain this instruction
manual and any order-related
information for future reference.
Lift, don't drag!
To avaoid damage to producet
please always LIFT the product
when transporting at adjusting
the placement.
Hardware
Hardware
#D
#A
#B
#C
#3
2
Hardware #A X 4pcs
#B X 4pcs
#C X 4pcs
Hardware
Hardware
adjust leveler
2)Adjust leveler according to ground level
1)Prepare 4 bolts assembly by Spring Washer (#B),than flat washer (#C)
onto bolts(#A).Secure shelf (#3) by using bolts(#A).Fully tighten all bolts.
#2
#1
#2
#D
#A
#B
#C

7 / 9
#A 4pcs X4
Bolt ∅1/4"X3''
#D 10pcs x 4
Spring Washer ∅1/4"
Flat Washer ∅1/4"
#E 10pcs x 4 #F 1pc x4
Allen Wrench M4
#1 1pc x4
Chair back
#2 1pc x4
Seat
#3 2pcs x4
Front leg
X 4
#B 4pcs X4
Bolt ∅1/4"X2-1/2''
#C 2pcs X4
Bolt ∅1/4"X1-1/2''
#G 6pcs x6
screws
∅8X1-3/4"
#4 2pcs x4
Side stretcher L/R Front stretcher
#5 1pc x4
#1
#4#5
#3
#2
CM3752PT-5PK
5PC. COUNTER HT. TABLE SET-CHAIR
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
PARTS
HARDWARE

8 / 9
1
Part #1 X 1pc
Part #3 X 1pc
#C X 2pcs
#D X 2pcs
#E X 2pcs
Hardware
Hardware
Hardware
Prepare 2 bolts assembly by Spring Washer (#D),than flat washer (#E) onto
bolts(#C).Align seat frame(#3) to the chair back(#1).then secure by ueing
bolts (#C) Do not fully tighten bolts(#C).
2
#A X 4pcs
#D X 4pcs
#E X 4pcs
Hardware
Hardware
Hardware
Prepare 4 bolts assembly by Spring Washer (#D),than flat washer (#E) onto
bolts(#A).Secure cornerholes holes of seat frame(#3)to chair back(#1) by
ueing bolts (#A) . Fully tighten bolts(#A.C).
#2
#1
#G
#C
#D
#E
#G
#A
#D
#E

9 / 9
ASSEMBLY
COMPLETED
Please ensure the
furniture rests on even
and flat surface. If the
product wobbles or feels
loose, double-check all
bolts and/or screws are
ptoperly tightened and
secured.
Keep this handy!
Please retain this instruction
manual and any order-related
information for future reference.
Lift, don't drag!
To avaoid damage to producet
please always LIFT the product
when transporting at adjusting
the placement.
3
Part #4 X 2pcs
#B X 4pcs
#D X 4pcs
#E X 4pcs
Hardware
Hardware
Hardware
Prepare 4 bolts assembly by Spring Washer (#D),than flat washer (#E) onto
bolts(#B).Align front legs(#4) to the holes of the chair frame(#3).Secure by
using bolts(#B)
4
Part #4 X 2pcs
#G X 6pcs
Hardware
Part #5 X 1pc Prepare 6 scerews(#G) assemble the seat
cushion(#3) than tighten the screws
#4R
#4L
#5
#3
#2
#2
#3
#G
#B
#D
#E
#4
#5 #5
#4
#F