Furniture of America CM3324PC-2PK User manual

Rev.16-02-23
CM3324PC-2PK

I. Align the seat (#2) to the
backrest with legs (#1).
II. Prepare 2 bolt assemblies
by FIRST inserting the
lock washer (#B) onto the
bolt (#D) then the flat
washer (#A) onto that
SAME bolt (#D). Secure
using the Allen wrench (#F).
Prepare 4 bolt assemblies by FIRST inserting the lock washer (#B) into the bolt (#C) then the flat
washer (#A) onto that SAME bolt (#C). Insert bolt assemblies into the corners of the seat (#2) and
secure using the Allen wrench (#F).

I. Insert the front legs (#3) into the front corners of the seat (#2).
II. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#B) onto the bolt (#E)
then the flat washer (#A) onto that SAME bolt (#E). Secure using the Allen wrench (#F).
Note: Make sure to insert the leg
supports as you install the legs.
Insert a wood screw (#G) into each pre-drilled hole on the
leg supports and secure using the Phillips screwdriver.
ASSEMBLY IS COMPLETED
*Left and right are determined by
facing the front of the chair at an
upright position.