Furniture of America YNJ-1469 User manual

Furniture of AmericaM
E-commerce-Enitial Lab
ASSEMBLY INSTRUCTIONS
YNJ-1469
ASSEMBLY RATING
The Assembly Rating is a 5-point
system that shows the degree of effort
needed in assembling a specific
product (with 1 being easy and 5 being
difficult). For most products, two
persons are recommended.
Tools Required for Assembly
Allen Wrench ~
(Included)
Phillips Screwdriver
(Not Included)
Hammer
(Not Included)
2 PERSON RECOMMENDED
EASY OOOO@ DIFFICULT
Page 1
16.04.12

• TM
Fu r ni ture of A erlca
E-commerce Division ~ Enitial Lab
Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment
to providing quality products does not simply end when a purchase
is made. We
stand behind our products and will provide any support needed
in order for you to
- lully enjoy your purcnase. Your satisfaction is-the greatest recognition we coula-
have.
Because we value your trust
in our company, we will do our best to meet your
service expectations. Should you have any assembly related questions, parts
replacement requests, comments or suggestions, please feel free
to contact us any
time. To help expedite the service, please have the assembly instructions available,
along with your order receipt.
www.foagroup.com
[email protected]
Toll-Free 1-888-980-5122 or 1-626-363-9311
1-626-270-4451
Monday to Friday 8:30 a.m. to 5:30 p.m. (PST)
https:lltwitter.com/foagroup
I http:/: http://instagram.com/foagroup#
http://www.pinterest.com/foagroup/
https:llwww.youtube.com/user/FurnitureOfAmerica
Page 2

~
FnmltlU'e ~ America
ASSEMBLY & CARE ADVICE
fOAYOUR FURNITURE TO LAST. CORRECT ASSEMSLY ANO PROPER MAINTENANCE ARE NECESSARY,
PLEASE FOLLOW THE INFORMATION PROVIDED SElOW TO fULLY ENJOY YOUR FURNITURE,
BASIC ASSEMBLY TECHNIQUES
1
It is highly recomn'lollded that the
assembly should be done near the
area 01 Its intended kx;ation, Make
Sure you have enough space to move
around during the assembly,
PosJtion each part correctly and insert
screws or bolls inlo their respeClive
holes by hand tighten or using Ihe
proper hand tool. Only tighten when
step is completed or when ins1nJcted
10 do so.
Use cardboafd Of carpet area whet'!
assembl10g furniture to prevent
scratches" Make sure the fUFnlllJfe
rests 011 a flat and level sw1ace with
each leg evenly touelling the f100L
4
ALWAYS have at least two people to
help with transporting and assembllng
the proouct to avoid any PQtenUal
injury andfor damage.
TURN
CLOCKWISE TO
TIGHTEN
Make SUfe all palts are properly
aligned,
then use the appropriate
hano tool to completely tighten the
bolts or screws. Do not use power
10015 and 00 not overtfghten,
Save the instructions and store any
supplted 1001 for latermaintenance.
After two weeM, check and lighten
any loose hardware and repeat again
every six months thereafter,
IT IS THE USER'S RESPONSIBILITY TO MAINTAIN THE FURNITURE, THE HARDWARE MAY
LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO
SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE
SERIOUS INJURY.
FAILURE TO FOLLOWTHE GUIDELINES ABOVE MAY
RESULT
IN INJURY AND/OR PROPERTY DAMAGE.
FuitNll'UkE OF A MtiliC A. All IUGHl'S RES£RVro.
Page 3

PRE-ASSEMBLY INTRODUCTION
Unless you are particularly adept at assembling flat-packlknock-down
furniture, we understand building ready-to-assemble furniture can
be a
frustrating experience for some. To help avoid confusion and to make
the assembly process quicker and smoother, we have provided some
helpful tips. Before you begin the assembly, please read the following:
1. _ nuejo~the_size_and/or_weighLoo_mostof the read¥=to-ass_embJeiuroiture_,_it_is _
highly recommended that the assembly should
be done near the area of its
intended location. Make sure you
11ave enough space to move around during
the assembly. ALWAYS have at least two people
to help with transporting and
assembling of the product
to avoid any potential injury and/or damage.
2. To protect from damage, assemble the item on a clean, protective surface,
such
as on a carpet or cardboard.
3. Make sure you have taken all the parts and hardware out of their packaging.
Do not throwaway packaging material until assembly is completed.
4. Make sure all parts and hardware are accounted for by comparing the actual
parts and hardware
to the list provided in the assembly instructions. Also
check for any irregularity such as crack, flaw or improperly drilled hole. If there
is any problem or missing piece, please contact the manufacturer or the
supplier. Please have the model number, part number and a brief description
of the problem ready will help expedite the replacement process.
5. Read the entire instruction manual and view the diagrams first before
assembling. Arrange your parts
in order of use and group the identical
hardware together to make
it easier to grab each piece as you begin to
assemble.
6. During the assembly process, make sure all parts are properly aligned before
tightening with the tool provided or required for the assembly.
Do not use
power tools and do not over tighten.
7. When applying glue to the wood dowels to bond the parts together, please be
ABSOLUTELY certain that the parts are correct and lined
up with each other
(refer to diagrams and take notice of the various pre-drilled hole locations).
When in doubt, assemble the parts together first and if the parts fit right, then
apply glue to the wood dowels.
Page 4

CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS
Note:Every cam lock bolt
must have a cam lock
connector in order to
fasten the parts together.
- - -Seco- re - the threaded
(1 )
end of the cam bolt
,by using a screwdriver
o
~
o
Turn right (clockwise) to tighten.
(2)
Insert tge cam lock
bolt into the
pre-drilled hole
above the cam
connector.
(4)
~ Align the cam
~ connector with its
" side
opening (or arrow)
pointing to the small
drilled hole.
(3) Two parts should
fit snuggly against
each other.
Turn
the cam connector with
a screwdriver until it will not
turn any more with light to
moderate force.
Turn right (clockwise) to tighten .
Page 5

END TABLE
ASSEMBLY INSTRUCTIONS
Please keep for future reference
MODEL#YNJ-1469
PARTS LIST
Before you begin, please
read "Assembly and
.. -Gare-Advice","F2re--
Assembly Introduction"
and "Cam Lock Fastener
Assembly Instructions"
DIMENSIONS
19.7" (W) X15.35" (D) X22.5" (H)
01PC
Ul'IPC
(t'IPC
Q)lPC
~lPC
4) lPC
(g lPC
Q'IPC
~
ID lPC
~ lPC
01PC
HARDWARE LIST
(j)6PCS @6PCS ®
lOPCS
@)4PCS
~4PCS
@4PCS (j)4PCS
[ )
--=::]
~
t=Jmmnmnnmn
[)-=
~
c0
®16PCS
@lPC
@2PCS @2PCS
@)SOPCS
@'IPC
®4PCS
W
~
()=
=mu{)
~
~
~
Page 6

ASSEMBLY INSTRUCTIONS
STEP1
Hardware #1 =6pes
Hardware #3=1 Opes
~G)
I
I
e_
I _
o
"-
I -_
~ <D
- I
Page 7

ASSEMBLY INSTRUCTIONS
STEP2
Hardware #4=4pcs
Hardware #8=4pcs
Hardware #9=16pcs
Page 8

ASSEMBLY INSTRUCTIONS
STEP3
Hardware #2=6pcs
Hardware #5=4pcs
Hardware #6=4pcs
Hardware #7=4pcs
Hardware #10=1
pc
Hardware #11=2pcs
Hardware #12=2pcs
Hardware #13=50pcs
i ®
,-
,
,
,
,
(
,
,--
,
,
,
CJ:
,
, -
,
L-
,
,
,
,
,
,
~ ..... ""
"
.
'
( /
,
,
, ,
,
, "
,'
,-
,
,
,
,
CJ'l
,
,-
"
,
,
,
,
,
,
-,
,
,
,
,
,
,
,
,
-f- ' ~
,
,
-'
,
" ," '" : ".- ....
,4~- -
~
Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
ASSEMBLY IS COMPLETED
Page 9