Furniture of America CM3358SC-2PK User manual

1 / 9
MODEL #
CM3358SC-2PK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 20-01-09
2 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ X9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X9

4 / XXXXX9

DINING CHAIR
CM3358SC-2PK
5 / 9
#1 1pc x2 #2 1pc x2
#D 2pcs x2#C 4pcs x2#B 4pcs x2
#G 2pcs x2
Front Leg (L/R)
#3 2pcs x2
#4 2pcs x2
Chair Back Cushion Seat
Stretcher (L&R)
#E 10pcs x2 #F 10pcs x2
#A 1pc x2
Bolt
Ø5/16" x 1-1/2"
Bolt
Ø5/16" x 2-3/8"
Bolt
Ø5/16" x 3-1/8"
Screw Ø8 x 1-1/2"
Lock Washer
Ø5/16"x13mm Flat Washer
Ø5/16" x 19mm
Allen Wrench M4

6 / 9
#1
#2
#3R
#3L
#4L
#4R
Exploded View

ASSEMBLY INSTRUCTIONS
1
2
7 / 9
Part #1 x1pc
Part #2 x1pc
Hardware #D x2pcs
Hardware #E x2pcs
Hardware #F x2pcs
Hardware #B x4pcs
Hardware #E x4pcs
Hardware #F x4pcs
#1
#2
#E
#F
#D
#A
#B
#A
#E #F
#1
#2
Align chair back (#1) to seat cushion (#2). Prepare bolt
assemblies by inserting lock washer (#E) to the bolts (#D),
then insert flat washer (#F) to the same bolts (#D). Secure by
using an Allen wrench (#A).
Prepare bolt assemblies by inserting lock washer (#E) to the bolts (#B),
then insert flat washer (#F) to the same bolts (#B). Secure by using an
Allen wrench (#A).

ASSEMBLY INSTRUCTIONS
3
4
8 / 9
Part #3 x2pcs
Hardware #G x2pcs
Hardware #G x2pcs
Hardware #C x4pcs
Hardware #E x4pcs
Hardware #F x4pcs
Part #4 x2pcs #3R
#3L
#4R
#4L
#G
#F
#E
#C
#A
#G
#4R
#4L
#3R
#3L
Align the stretchers (#4) to the chair back leg and the front legs
(#3) to the seat front. Insert screws (#G) and secure with
screwdriver.
Prepare bolt assemblies by inserting lock washer
(#E) to the bolts (#C), then insert flat washer (#F) to
the same bolts (#C). Secure by using an Allen
wrench (#A).

ASSEMBLY INSTRUCTIONS
5
9 / 9