Furniture of America Menodora CM7311EK User manual

MODEL #
CM7311EK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
(Not Included)
(Included)
Allen Wrench
Recommended
1 / 8
Phillips Screwdriver
(Included)
Wrench
VERSION # 20-11-02

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 8

4 / 8

CM7311EK
#1 1pc
Headboard H/Board Leg (R/ L)
#2 2pcs
#A 8pcs
Bolt Ø5/16" x 2-1/4"
5 / 8
H/BoardLegRail
#3 1pc
Footboard
#4 1pc
#5 2pcs
#B 14pcs
Bolt Ø5/16" x 1-3/4"
#C 22pcs
Lock washer
Ø5/16"
#E 1pc
Allen wrench 5mm
#F 8pcs
Threaded Stud
Ø5/16"x3-1/2"
#6 4pcs
Side Rail Slat
#7 8pcs
Support Leg 214*30*30mm
#D 22pcs
Flat washer
Ø5/16"
#G 8pcs
Hex Nut
Ø5/16"
#H 1pc
Wrench
Ø12mm
#K 8pcs
Screw
#8 x 1-3/16"
BED

#1
Headboard
H/Board Leg (R/ L)
H/BoardLegRail
Footboard
Side Rail
Slat
Support Leg
214*30*30mm
#2
#3
#4
#5
#6
#7
#A 8pcs
#B 14pcs
#C 22pcs
#E 1pc
#F 8pcs
#D 22pcs
#G 8pcs
#H 1pc
#K 8pcs
6 / 8
#1
#2
#2 #3 #4
#5
#5
#6
#7
CM7311EK is packed in 3 cases
Carton Disignation Part Hardware
CM7311EK-HB
CM7311EK-FB
CM7311EK-R

ASSEMBLY INSTRUCTIONS
1
Part #1 x1pc
Hardware #A x8pcs
Part #2 x2pcs
7 / 8
2
Hardware #F x8pcs
Part #4 x1pcs
Part #3 x1pc
Hardware #B x14pcs
Hardware #C x22pcs
Hardware #D x22pcs
#F
#B
#C
#D
#E
#E
#A
#C
#D
#G
#H
#1
#2R
#3
#1
#4
#5
#5
#2L
#E
#B
#C
#D
#5
Part #5 x2pcs
Hardware #G x8pcs
1) Prepare 22 bolts assembly by inserting lock washer (#C), then
flat washer (#D) onto bolts (#A,B). Align HB legs (#2R/L) to the
holes of the headboard (#1). Secure by using bolts (#A,B). Do
not fully tighten.
2) Align HB support (#3) to the
holes of the HB legs (#2R/L).
Secure by usign bolts (#B)
Fully tighten all bolts (#A,B).
Attach threaded bolts (#F) to the headboard (#1) and
footboard (#4). Align side rails (#5) to the threaded
bolts (#F), then secure by using hex nut (#G).

ASSEMBLY INSTRUCTIONS
3
8 / 8
4
Part #6 x1pc
Part #7 x2pcs
Hardware #K x8pcs
#5
#1
#6
#K #5
#4
X 4
#6
#7
Attach support legs (#7) to the holes of the slats (#6),
then adjust leveler on the support legs (#7) according
to ground level.
Align slats to the side rails (#5), then secure by using
screws (#K).