Furniture of America CM4915-3PK User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
Assembly Instructions
No Tools Required for Assembly
Rev.14-06-20
Page 1 of 5
DIFFICULT
ASSEMBLY RATING
CM4915-3PK
2 PERSONS RECOMMENDED

Page 2 of 5

#2 x 1 pc
Bottom Shelf
Parts List
#1 x 1 pc
Coffee Table Top
#3 x 4 pcs
Pedestal
#5 x 2 pcs
End Table Top
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
MD
Page 3 of 5
#6 x 8 pcs
End Table Leg
#4 x 4 pcs
Foot
Due to the size and/or weight of this product, it is highly recommended that
the assembly should be done near the area of its intended location. Make
sure you have enough space to move around during the assembly.
ALWAYS have at least two people to help with transporting and assembling
of the product and to avoid any potential injury and/or damage.

Page 4 of 5
I. Carefully place the end table top (#5) facing down on a
protected surface.
II. Align the threaded end of the end table legs (#6) with the pre-
drilled holes on the bottom of the end table top (#5) and tighten
by hand until secured.
III. Repeat the process above to assemble the second end table.

Page 5 of 5
Carefully place the coffee table top (#1) facing down on a
protected surface. Align the threaded end of the pedestals
(#3) with the pre-drilled holes on the bottom of the coffee
table top (#1) and tighten by hand until secured.
Align the bottom shelf (#2) with the pre-drilled holes on
the pedestals (#3). Then align the threaded end of the
feet (#4) with the pre-drilled holes on the bottom shelf
(#2) and tighten by hand until secured.
ASSEMBLY IS COMPLETED