Furniture of America CM6229 User manual

2 - People
Recommended
VERSION # 20-11-17
1 / 16

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 16

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 16

4 / 16

5 / 16

6 / 16

Carton Disignation Part Hardware
#1
#2
#6
#7
#5
#8
CM6229-LCH
CM6229-CN
#9
#10
#11
#12
#13
CM6229-CNR
CM6229-RCE
Left Chair Back Cushion
Left Chair Seat
Left Arm Rest #3
Console Back Cushion #4
Console Seat
Armless Back Cushion
Armless Chair Seat
Left Corner Back
Cushion
Right Corner Back
Cushion
Corner Seat
Right Chaise Back
Cushion
Right Arm Rest
Right Chaise Seat
#F x 1pc
#G x 2pcs
#F x 1pc
#G x 2pcs
#D x 4pcs
#E x 1pc
#A x 4pcs
#Bx 4pcs
#C x 4pcs
CM6229 is packed in 6 cases
CM6229-AC #F x
x 2
x 2
2pcs
7 / 16

8 / 16
Attach threaded rods (#G) to the left arm
rest (#3).
Insert left arm rest (#3) to the left chair
seat (#2).

9 / 16
Align and attach the metal brackets of
the backrest (#1) to the metal
brackets of the seat (#2).
Align and attach the metal
brackets of the console back
cushion (#4) to the metal
brackets of the console seat
(#5).

10 / 16
Align and attach the metal brackets of
the armless back cushion (#6) to the
metal brackets of the armless seat
(#5).
Attach threaded rods (#A) one quarters
into the back cushions (#8,9).

11 / 16
Align back cushions (#8,9) to the
corner seat (#10), then secure by
using nuts (#B) with washers
(#C,D).
Attach threaded rods (#G) to the
arm rest (#13).

12 / 16
Insert arm rest (#13) to the
chaise (#12).
Align and attach the metal brackets of
the chaise back cushion (#11) to the
metal brackets of the chaise seat
(#12).

13 / 16

14
14 / 16

16
15
15 / 16
If another console was purchased.

18
17
16 / 16