Furniture of America CM7682EK User manual

1 / 8
CM7682EK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
VERSION # 20-07-29
MODEL #

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX8

4 / XXXXXXX8

BED
CM7682EK
#1 1pc #2 2pcs #3 1pc
5 / 8
Headboard Footboard
Headboard Leg(L/R)
#4 2pcs
Side Rail
#5 4pcs #6 8pcs
Slat Leg32x32x195mm
#A 6pcs #B 6pcs #C 6pcs
Bolt Ø5/16x1-3/4" Lock WasherØ5/16
#D 1pc
Allen Wrench M5
#E 8pcs #F 2pcs
Screw #8x1-3/16" Wood Dowel
Flat WasherØ5/16

Carton
Disignation Part Hardware
#4
#1
#3
#2
Headboard Leg
Footboard
Slat
Leg
#6
Side Rail
#Ex 8pcs
#A x 6pcs
#B x 6pcs
#Cx 6pcs
#D x 1pc
#Fx 2pcs
6 / 8
#4
#6
#3
#2R
#1
#2L
#5
CM7682EK-R
CM7682EK-FB #5
CM7682EK is packed in 3 cases
Headboard
CM7682EK-HB

1
2
Part #1 x1pc
Part #2 x2pcs
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #C x6pcs
7 / 8
ASSEMBLY INSTRUCTIONS
Hardware #F x2pcs
#2L
#2R
#1
#D
#A #B #C
#F
#4
#4 #3
Part #3 x1pc
Part #4 x2pcs
1) Attach wood dowels (#F) to the top hole of each
headboard legs (#2R/L).
2) Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C)
onto bolts (#A). Align and attach headboard legs (#2R/L) to the holes of the
headboard (#1). Secure with bolts (#A).
Hook side rails (#4) to the latch of the headboard (#1) and footboard (#3).
Make sure it is firmly in place.

3
4
8 / 8
ASSEMBLY INSTRUCTIONS
Part #5 x4pcs
Part #6 x8pcs x4
Hardware #E x8pcs
#5 #6
#E
Attach support legs (#6) to the holes of the slats (#5).
Adjust floor protectors according to ground level.
Align slats (#5) to the side rails
(#4). Secure with screws (#E).