Furniture of America HFW-1861C2 User manual

Page 1 of 14 REV.18-01-10
HFW-1861C2

Page 2 of 14

Page 3 of 14

Page 4 of 14

Page 5 of 14
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS

SHOE CABINET
ASSEMBLY INSTRUCTIONS MODEL # HFW-1861C2
please keep for future reference PARTS LIST
HARDWARE LIST
76PCS 812PCS 94SETS 10 2SETS
DIMENSIONS : 31.5"(W)*16.3"(D)*33.4"(H)
Page 6 of 14
1PC
116PCS 216PCS 32PCS 421PCS 51PC 65PCS
0.5" 1.2"
A
11 8SETS 12 2SETS
13 4PCS
1PC
B
1.6"
1.0"
0.6"
(8x30)(8x20)
14 6PCS
0.47"
1PC 1PC 1PC
E
CD1PC
F
2PCSG
2PCS
H
1PC
I
1PC 1PC
KJ 1PC L
2PCS
2PCS
M
N
1PC 1PC
P
O
A
JKD

SHOE CABINET
MODEL#HFW-1861C2
Get Ready.
Please group boards as below.
Doors/Shelf
Page 7 of 14
Body
Base
1PC
E1PC
F2PCSG1PC 1PC
D
C
1PC
B1PC A1PCO1PC P
2PCS
M2PCS
N
2PCS
H1PC I1PC 1PC
KJ 1PC L

ASSEMBLY INSTRUCTIONS
Page 8 of 14
STEP : 1
Hardware 1 x 16 pcs
Hardware 4 x 21 pcs (8X30)
A
B
C
D
E
E
FG
3
4
Use larger dowels (#4) on step 1.

ASSEMBLY INSTRUCTIONS
STEP : 2
Page 9 of 14
Hardware 2 x 3 pcs
F
G
G
E
F
G
G
E
C
D
STEP : 3
Hardware 2 x 3 pcs
finish
finish
finish
Use a dab of glue into dowel holes before inserting dowels on the
following panels in the diagram.
Refer to page 5 on how to secure cam
locks (#2) onto cam bolts (#1).
Grooves of panels (#C,E,D) are located towards the bottom.

ASSEMBLY INSTRUCTIONS
STEP : 4
Page 10 of 14
Hardware 7 x 6 pcs
B
C
D
E
N
N
STEP : 5
Hardware 2 x 4 pcs
N
N
B
76
1.6" 1.0"
Use longer screws (#7) on steps (#4).
Grooves on panel (#B).
Attach panels (#M) to panels (#N) together, then attach and secure them to the
bottom of the product as shown in the diagram.

ASSEMBLY INSTRUCTIONS
Page 11 of 14
STEP : 6
Hardware 14 x 6 pcs
14
14 14
14
14
14
A
C
D
O
P
STEP : 7
Hardware 2 x 6 pcs
Tap floor protectors (#14) to the bottom of
the product by using a hammer.
Align and insert back panels (#O,P) to
the grooves of the product. Make sure
the back panels (#O,P) are fully flushed
within the grooves of the product.

ASSEMBLY INSTRUCTIONS
STEP : 8
Page 12 of 14
Hardware 8 x 12 pcs
J
K
6
H
HI
finish
8
88
C
D
E
STEP : 9
Hardware 3 x 2 pcs (8X20)
Hardware 6 x 5 pcs
Hardware 9 x 4 sets
Hardware 10 x 2 sets
Hardware 13 x 4 pcs
9
9
10
9
9
10
8x20
13
13
13
13
Insert shelf pins (#8) to the desired height of the shelves (#H,I).
Use smaller dowels (#3) on steps 9.

ASSEMBLY INSTRUCTIONS
Page 13 of 14
STEP : 10
ASSEMBLY IS COMPLETED
Make sure the unit is rested on a flat
surface and does not feel loose or
wobbly. If it does, double check all
bolts/screws are secured and properly
tightened.
12
11
11
For safety reason, this item has been
supplied with wall straps. We highly
recommend securing the item to the
wall using the supplied hardware
and straps to prevent tip-over
resulting in damages and/or injuries.
STEP : 11
Hardware 11 x 8 sets
Hardware 12 x 2 sets
J
K
9
9
Hardware 9 x 4 sets
Please refer to last page
for hinge adjustment.

Page 14 of 14