Furniture of America CM7099Q User manual

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#C). Align the foot
(#5) to the holes of the headboard (#1) and footboard (#3). Secure with bolts (#C).
Prepare 8 bolts assembly by inserting lock washer
(#D), then flat washer (#E) onto bolts (#A). Screw
bolts (#A) to the holes of the headboard (#1) and
footboard (#3) half way in. Hook and rest the side
rails (#2) to the headboard (#1) and footboard (#3).
Tighten bolts (#A).

Prepare 2 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#B).
Align support legs (#7) to the hole of the support rail (#4). Secure with bolts (#B).
Prepare 4 bolts assembly by inserting lock
washer (#D), then flat washer (#E) onto bolts
(#B). Align support rail (#4) to the holes of the
headboard (#1), and footboard (#3). Secure with
bolts (#B).

Connect the slats (#6) with center
connectors (#F) and end caps (#G) as
shown in the picture.
Plug to outlet
Plug to device

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#C). Align
the foot (#5) to the holes of the headboard (#1) and footboard (#3). Secure with bolts (#C).
Prepare 8 bolts assembly by inserting lock
washer (#D), then flat washer (#E) onto bolts
(#A). Screw bolts (#A) to the holes of the
headboard (#1) and footboard (#3) half way in.
Hook and rest the side rails (#2) to the
headboard (#1) and footboard (#3). Tighten
bolts (#A).

Prepare 2 bolts assembly by inserting lock washer (#D),
then flat washer (#E) onto bolts (#B). Align support legs
(#7) to the hole of the support rail (#4). Secure with bolts
(#B).
Prepare 4 bolts assembly by inserting lock
washer (#D), then flat washer (#E) onto bolts
(#B). Align support rail (#4) to the holes of the
headboard (#1), and footboard (#3). Secure with
bolts (#B).

Connect the slats (#6) with the center connectors
(#F) and end caps (#G) as shown in the picture.
Attach the slats (#6) to the bed.
Plug to outlet
Plug to device

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#C), then flat washer (#D) onto bolts (#B). Align
the foot (#5) to the holes of the headboard (#1) and footboard (#3). Secure with bolts (#C).
Prepare 8 bolts assembly by inserting lock washer
(#C), then flat washer (#D) onto bolts (#A). Screw
bolts (#A) to the holes of the headboard (#1) and
footboard (#3) half way in. Hook and rest the side
rails (#2) to the headboard (#1) and footboard (#3).
Tighten bolts (#A).

Attach end caps (#E) to the end of each slats (#5).
Attach the slats to the side rails (#2).
Plug to outlet
Plug to device