Furniture of America Hailey CM3828SC-2PK User manual

Rev: 15-09-01

Screw

1. Align the stretcher bar
(#4) from below to the
holes along the sides o
f
the leg stands (#3R/L).
2. Insert 2 bolts (#A) into
each side and secure
using the Allen wrench.
2. Align the ends of the leg
stands (#3R/L) to the
backrest w/legs (#1).
1. Place the backrest w/legs (#1)
onto a protected surface.
3. Insert 2 bolts (#A) into
each end and secure
using the Allen wrench.
Note: Right and left is
determined by facing
the back of the chair
in its upright position.

1. Align the right stretcher support (#5R) to the bottom
of the right leg stand (#3R) and backrest w/legs (#1).
2. Insert a bolt (#A)
to the top end and
secure using the
Allen wrench.
3. Insert a bolt (#B) into the
bottom end and secure
using the Allen wrench.
4. Repeat the process
for the left stretcher
support (#5L).
Place the seat (#2) onto the chair and insert
4 screws (#C) from below, then secure.
ASSEMBLY IS COMPLETED