Furniture of America CM3212AC-2PK User manual

Recommended
Allen Wrench
(Included)
(Not Included)
Phillips
Screwdriver
2 - People
DIFFICULTEASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
MON-FRI 8:30AM - 5:30PM (PST)
GIVE US CALL: 1-888-980-5122
Questions?
CM3212AC-2PK
MODEL #
1 / 8
TOOLS REQUIRED
ASSEMBLY RATING
VERSION # 20-09-07

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX8

4 / XXXXXXX8

Wood Nut Ø15x9
#G 2pcs x2
#4 2pcs x2
Arm L&R
Bolt Ø5/16" x 2-3/4"
#C 4pcs x2
Bolt Ø5/16" x 2-3/8"
#B 4pcs x2
#3 2pcs x2
CM3212AC-2PK
#D 13pcs x2
Lock Washer Ø5/16"
Allen Wrench M4
#F 1pc x2#E 11pcs x2
Flat Washer Ø5/16"
Bolt Ø5/16" x 1-1/2"
#A 5pcs x2
#2 1pc x2#1 1pc x2
5 / 8
CHAIR
Front Leg
Cushion Seat
Chair Back
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
PARTS
HARDWARE

1
x2
x2
#F
#A
#D
#E
#2
#1
#1 x1pc
Part #2 x1pc
Part
Exploded View
hole and secure using the Allen wrench.
insert the bolt assembly into the center
along the backrest w/legs (#1), then
3. Align the seat cushion (#2) to the hole
onto that same bolt (#A).
then a flat washer (#E)
(#D) onto the bolt (#A)
by inserting a lock washer
2. Prepare a bolt assembly
onto a protected surface.
1. Place the backrest w/legs (#1)
#4R
#4L
#3
#2
#1
#E x1pc
Hardware
#D x1pc
Hardware
#A x1pc
Hardware
6 / 8
ASSEMBLY INSTRUCTIONS

#F
#B
#D
#E
#3
#3 x2pcs
Part
#F #C#D
#E
x2
x2
corner and secure using the Allen wrench.
then insert 2 bolt assemblies into each
along the front corners of the seat (#2),
2. Align the front legs (#3) to the holes
a flat washer (#E) onto that same bolt (#B).
lock washer (#D) onto the bolt (#B) then
1. Prepare 4 bolt assemblies by inserting a
#E x4pcs
Hardware
#D x4pcs
Hardware
#B x4pcs
Hardware
and secure using the Allen wrench (#F).
(#C). Insert 2 bolts into each back corner
a flat washer (#E) onto that same bolt
lock washer (#D) onto the bolt (#C) then
Prepare 4 bolt assemblies by inserting a
#E x4pcs
Hardware
#D x4pcs
Hardware
#C x4pcs
Hardware
3
2
7/ 8
ASSEMBLY INSTRUCTIONS

#D
#A
#F
#G
#F
#A
#D
#E
#4
x2
x2
arms (#4) and secure.
into each bottom end of the
same bolt (#A). Insert a bolt
a flat washer (#E) onto that
(#D) onto the bolt (#A) then
first inserting a lock washer
3. Prepare 2 bolt assemblies by
a wood nut (#G) into each.
Allen wrench (#F) and apply
arms (#4). Secure using the
the bolt into the top end of the
onto the bolt (#A), then insert
inserting a lock washer (#D)
2. Prepare 2 bolt assemblies by
holes along the side of the chair.
1. Align the arms L/R (#4) to the
#G x2pcs
Hardware
#E x2pcs
Hardware
#D x4pcs
Hardware
#A x4pcs
Hardware
5
4
8/ 8
Part
#4x2pcs
ASSEMBLY INSTRUCTIONS