Furniture of America CM7383Q User manual

2. Align the headboard posts (#2)
to the holes along the side of
the headboard (#1). Insert
a bolt assembly into each
hole and secure using the
Allen wrench (#F). Apply a
wood button (#E) onto each.
1. Prepare 2 bolt assemblies by first inserting a lock washer (#C) onto
the bolt (#A) then a flat washer (#D) onto that same bolt (#A).
Prepare 6 bolt assemblies by first
inserting a lock washer (#C) onto
the bolt (#B) then a flat washer
(#D) onto that same bolt (#B).
Insert into the holes and secure.

Hook each end of the side rails (#4) onto the
slots along the headboard (#1) and footboard (#3).
Insert the threaded ends of the support legs (#6)
into the holes along the slats (#5). Turn right to tighten.
Adjust according to the ground level.

Align each end of the slats (#5) to the
holes along the side rails (#4), then insert
a screw (#G) into each end. Secure.
ASSEMBLY IS COMPLETED

1. Prepare 2 bolt assemblies by first inserting a lock washer (#C) onto
the bolt (#A) then a flat washer (#D) onto that same bolt (#A).
2. Align the headboard posts (#2)
to the holes along the side of
the headboard (#1). Insert
a bolt assembly into each
hole and secure using the
Allen wrench (#F). Apply a
wood button (#E) onto each.
Prepare 6 bolt assemblies by first
inserting a lock washer (#C) onto
the bolt (#B) then a flat washer
(#D) onto that same bolt (#B).
Insert into the holes and secure.