Furniture of America CM7124-F User manual

1 / 9
MODEL #
CM7124-F/Q
Questions?
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
3 - People
Recommended
VERSION # 21-10-12
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PT)

2 / 9
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

3 / 9
PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
scratches and damages.

4 / XXXXXXX9

FULL BED / QUEEN BED
CM7124-F-Q
#1 1pc
Headboard Headboard Leg
- L & R
#2 2pcs #3 1pc
Footboard
5 / 9
#4 4pcs
Side Rail - L & R Side Rail
Support Leg
#5 2pcs #6 4pcs
Bed Slat
#7 4pcs
Slat Support
29 x 29 x 276 (mm)

6 / 9
#A 6pcs
JCBB Bolt
M8 x 40 mm
Spring Washer
M8
#B 6pcs
Flat Washer
M8
#C 6pcs #D 1pc
Allen Key
M5
JCBB Bolt
M8 x 16 mm
#E 8pcs
JCBC Bolt
M6 x 40 mm
#F 12pcs #G 12pcs
Spring Washer
M6
#H 8pcs
Flat Washer
M6
#I 1pc #J 8pcs
CSK Screw
M4 x 32 mm
Allen Key
M4
HARDWARE

ASSEMBLY INSTRUCTIONS
1
2
Part #1 x1pc
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #C x6pcs
7 / 9
Part #2 x2pcs
Hardware #D x1pc
Part #4 x4pcs
Hardware #F x8pcs
Hardware #G x8pcs
Hardware #H x8pcs
Part #5 x2pcs
Hardware #I x1pc
#1
2L
2R
#A
#B
#C
#D
- Tighten the JCBC Bolt (#F) with
spring washer (#G) & flat washer
(#H) through side rail (#4) to support
leg (#5) using allen key (#I).
#5
#F
#G
#H
#I
Align HB legs (#2R/L) to the headboard (#1), then
secure by using bolts (#A) with washers (#B,C).
4L
4R

ASSEMBLY INSTRUCTIONS
3
4
Hardware #E x8pcs
8 / 9
Part #1 x1pc
Hardware #D x1pc
#1
#3
#2
#2
- Tighten the JCBC Bolt (#E)
through the Headboard Leg
(#2) or Footboard (#3) using
allen key (#D).
#E
STEP 4 STEP 5
#1
#2
#3
#4
#5
#D
Part #3 x1pc
Part #1 x1pc
Part #3 x1pc
Part #4 x4pcs
Align and hook side rails (#4,5) to the bolts of the
headboard (#1) and footboard (#3), then secure
by tightening the bolts.

ASSEMBLY INSTRUCTIONS
5
6
Part #6 x4pcs
Hardware #F x4pcs
Hardware #G x4pcs
Hardware #I x1pc
9 / 9
Part #7 x4pcs
Hardware #J x8pcs
- Tighten the JCBC Bolt (#F) with spring
washer (#G) through the slat support (#7)
using allen key (#I).
NOTE: THE SETUP MUST DONE AT THE
DECIDED LOCATION FOR THE BED
OBTAIN PERFECT STABLITY
Adjustable glider
#I
#F
#G
- Tighten the CSK Screw (J)
through the slat (6) using
screw driver. J
#6
#7
Part #6 x4pcs
#6