Furniture of America Ornette CM3353T User manual

1 / 10
CM3353T
(Included)
Allen Wrench
Recommended
2 - People
EASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
DIFFICULT
VERSION # 20-03-27
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
MODEL #

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX10

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X10

4 / XXXXXXX10

TABLE
CM3353T
#1 1pc
Table Top
#2 1pc
Connect Panel
#3 2pcs
Leaf
#A 56pcs
Bolt
Ø5/16" x 2"
#C 56pcs
#4 12pcs
ARC Leg
#5 2pcs
Round Connect Panel
#D 1pc
Allen Wrench
M4
#B 56pcs
5 / 10
#6 2pcs
Foot Base
Lock Washer
Ø5/16" Flat Washer
Ø5/16"
HARDWARE

Carton Disignation Part Hardware
CM3353T -1
#A x 56pcs
#2
#3
6 / 10
Leaf
Connect
Panel
#C x 56pcs
#D x 1pc
#4
Round
Connect
Panel
#5
Round
Connect
Panel
CM3353T -2
#6
Foot
Base
CM3353T is packed in 2 cases
Table Top #1
#B x 56pcs

Part #4 x 6pcs
Part #5 x 1pc
Hardware #A x 6 pcs
Hardware #B x 6 pcs
Hardware #C x 6 pcs
#C #B #A #D
#4
#5
x 2
1.Prepare 6 bolt assemblies by first
inserting a lock washer (#B) onto
the bolt (#A) then a flat washer (#C).
2.Align the arc legs (#4) to the
round connect panel (#5),then
insert the bolts and secure.
7 / 10
ASSEMBLY INSTRUCTIONS
1
2
#1
#1
#2
#3
#4
#4
#6
#6
#5
#5

Part #6 x1pc
Hardware #A x 12 pcs
Hardware #B x 12 pcs
Hardware #C x 12 pcs
Part #3 x1pc
#D
#A
#B
#C
x 2
#4
#6
#3
x 2
#D
#A
#B
#C
1.Prepare 12 bolt assemblies by first
inserting a lock washer (#B) onto
the bolt (#A then a flat washer
(#C) onto that same bolt (#A).
2.Align the foot base (#6) to the
holes along the bottom of the legs,
then insert the bolts and secure.
1.Prepare 6 bolt assemblies by first inserting
a lock washer (#B) onto the bolt (#A) then a
flat washer (#C).onto that same bolt (#A).
2.Align the connect panel (#3) to the holes along the
top of the legs, then insert the bolts and secure.
8 / 10
ASSEMBLY INSTRUCTIONS
3
4

Hardware #A x 8 pcs
Hardware #C x 8 pcs
Hardware #D x 8 pcs
#1
#3
#3
#D
#A
#B
#C
OPEN
1.Prepare 8 bolt assemblies by first inserting a lock washer (#B) onto
the bolt (#A）then a flat washer (#C) onto that same bolt (#A).
2.Align the connecting shelf (#3)to the holes along the
table top (#1), then insert the bolts and secure.
Unlock the latches along the bottom.
9 / 10
ASSEMBLY INSTRUCTIONS
5
6

#1
#2
CLOSE
#1
#2
Slide the outer parts outward,then
place the leaf (#2) onto the rails.
Slide the outer parts inward ,then lock the latches along the bottom.
10 / 10
ASSEMBLY INSTRUCTIONS
7
8
Part #2 x1pc