Furniture of America FOA7038-F User manual

1 / 7
MODEL #
FOA7038-F
Questions?
EASY DIFFICULT
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PT)
3 - People
Recommended
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
VERSION # 22-01-17

2 / 7
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX7
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
scratches and damages.

4 / XXXXXXX7

FULL SIZE BED
FOA7038-F
5 / 7
Headboard
#2 1pc #5 2pcs #6 2pcs
#7 12pcs #8 4pcs
Side Rail
Right
Bed Slat -
1387x45x18mm Bed Slat
Support -
248x30x30mm
Bed Center Slat
- 815x45x18mm
Side Rail
Support
Leg
#3 2pcs #4 2pcs

ASSEMBLY INSTRUCTIONS
1
2
6 / 7
Part #1 x1pc
Part #3 x2pcs
Hardware #A x4pcs
Align Headboard Leg(#3) to the Headboard(#1),
then Secure with
JCBC (#A),Spring washer (#C) and Flat washer (#D).
Tighten with Allen Key (#F).
DO NOT FULLY TIGHTEN SCREW
IN THIS STEP BEFORE ALIGN
THE SIDE RAIL AS SHOWN.
Align the side rail (#4) & (#5) to the Side Rail Leg
(#6).Secure with
JCBC (#A),Spring washer (#C) and Flat washer
(#D).Tighten with Allen Key (#F).
Repeat the same step for other Side Rail Assembly.
#F
#C
#D
#A
#4
#5
#6
X8
STEP 1.1 :
STEP 1.2 :
#3
4x
8x
Hardware #C x4pcs
Hardware #D x4pcs
Hardware #E x8pcs
#3
#1
#F
#A
#C
#D
#E
Right
Left
Part #4 x2pcs
Hardware #A x8pcs
Part #5 x2pcs
Part #6 x2pcs
Hardware #C x8pcs
Hardware #D x8pcs

ASSEMBLY INSTRUCTIONS
3
4
7 / 7
Align the Side Rail (#4) and
(#5) to Headboard &
Footboard then secure by
tightening bolts.
#G
#4
#4
#5
#5
#8
#9 #7
#B
#7
#E
#7
X24
Part #7 x12pcs
Hardware #B x4pcs
Part #8 x4pcs
Part #9 x2pcs
Hardware #E x24pcs
#9
#8
#2
Part #2 x1pc