Furniture of America CM7688Q User manual

Align the headboard (#1) to the
holes along the headboard
posts (#3,4), then insert a
bolt (#A) with flat washer (#C)
into each hole and secure.
Align the footboard (#1)
to the holes along the
footboard posts (#5,6),
then insert a bolt (#A)
with flat washer (#C) into
each hole and secure.

Insert the side rail (#8) into the side
rail (#7), then insert a bolt (#A) with
flat washer (#C) into each hole.
Secure using the Allen wrench (#D).
Align each end of the rails
to the holes along the posts,
then insert a bolt (#A) with
flat washer (#C). Secure.

Align the support legs (#11) to the holes along the slat (#10),
then insert a bolt (#B) with flat washer (#C) and secure.
Place the slats (#9) onto the
slots along the rails, then
insert a bolt (#A) with flat
washer (#C) from beneath.
Secure using the Allen wrench.

Align the headboard (#1) to the
holes along the headboard
posts (#3,4), then insert a
bolt (#A) with flat washer (#C)
into each hole and secure.
Align the footboard (#1)
to the holes along the
footboard posts (#5,6),
then insert a bolt (#A)
with flat washer (#C) into
each hole and secure.

Insert the side rail (#8) into the side
rail (#7), then insert a bolt (#A) with
flat washer (#C) into each hole.
Secure using the Allen wrench (#D).
Align each end of the rails
to the holes along the posts,
then insert a bolt (#A) with
flat washer (#C). Secure.

Align the support legs (#11) to the holes along the slat (#10),
then insert a bolt (#B) with flat washer (#C) and secure.
Place the slats (#9) onto the
slots along the rails, then
insert a bolt (#A) with flat
washer (#C) from beneath.
Secure using the Allen wrench.

Align the headboard (#1) to the
holes along the headboard
posts (#3,4), then insert a
bolt (#A) with flat washer (#C)
into each hole and secure.
Align the footboard (#1)
to the holes along the
footboard posts (#5,6),
then insert a bolt (#A)
with flat washer (#C) into
each hole and secure.

Insert the side rail (#8) into the side
rail (#7), then insert a bolt (#A) with
flat washer (#C) into each hole.
Secure using the Allen wrench (#D).
Align each end of the rails
to the holes along the posts,
then insert a bolt (#A) with
flat washer (#C). Secure.

Align the support legs (#11) to the holes along the slat (#10),
then insert a bolt (#B) with flat washer (#C) and secure.
Place the slats (#9) onto the
slots along the rails, then
insert a bolt (#A) with flat
washer (#C) from beneath.
Secure using the Allen wrench.